Document overview
Operator's manual for SAME FRUTTETO³ 55 NATURAL → ZKDCK40200RS10001 from the FRUTTETO³ NATURAL family. Digital PDF in English, 276 pages.
The original table of contents contains 67 sections and 221 detailed topics, providing a clear view of the systems and procedures covered by this edition.
- Preface
- IDENTIFICATION
- SAFETY
- GETTING TO KNOW YOUR TRACTOR
- USING THE TRACTOR
- STORING THE TRACTOR
- MAINTENANCE OPERATIONS
- FAULT DIAGNOSIS
- WHEELS
- ELECTRICAL SYSTEM
- TECHNICAL DATA
Document details
- Brand: SAME
- Family: FRUTTETO³ NATURAL
- Model: FRUTTETO³ 55 NATURAL
- Starting serial number: ZKDCK40200RS10001
- Document type: Operator's manual
- Language: English
- Pages: 276
- File size: 22.01 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that the model and starting serial number of your machine match FRUTTETO³ 55 NATURAL → ZKDCK40200RS10001.
Complete table of contents
Preface
Important
- Warning
- Handover of the tractor to the customer
- To the owner of the new tractor
IDENTIFICATION
- List of model serial numbers
Identification plates
- Tractor identification plates
- Tractor serial number
- Engine registration number
- Engine identification plate
- Identification label of protection devices
- Change of ownership of the tractor.
Glossary
- Technical terms used in this manual
- Acronyms used in this manual
- Units of measurement used in this manual and conversion factors
Warranty
- Warranty terms and conditions
- Exclusions to the warranty
- Intended use
- Conditions rendering the warranty null and void
- Emissions Warranty (for North America market only)
- Original spare parts
SAFETY
- Introduction
Practical advice on safe working procedures
- Protect the Environment
- General safety rules
Accident prevention and personal safety
- Safety clothing and equipment
- Exposure to noise
- Boarding and alighting from the tractor
- Parking the tractor
- Cleaning the tractor
Operation
- Checking indicator lights
- Starting fluids
- Auxiliary equipment
- Towing safely
- Driving on the road
- Overturning
- Repairs and maintenance in safety
Protective structure and seat belt
- Roll-over protective structure (R.O.P.S.)
- Seat belt
- Emergency stop
Correct and incorrect use of the tractor
- Intended usage
- Improper and incorrect usage
Recognising hazards
- Understanding risk levels associated with safety messages
- Recognising important information
- Hazard symbols
Indications for persons in contact with the tractor
- Necessary requirements for driving the tractor
- Appropriate clothing
- Protective equipment
- Keeping full control of the tractor
- Keep children away from the machine
- Carry passengers only if the tractor is equipped with a passenger seat
- Observe applicable regulations when carrying passengers on the road
- Observe applicable regulations when carrying an instructor in the field
Safety warning notices
- Introduction to safety pictograms
- Adhesive safety warning decals
GETTING TO KNOW YOUR TRACTOR
Exterior views of the tractor
- External views of the tractor
Access to the driving position
- Access to the driving position
Operator seat
- “COBO SC74/SM20” seat
- Seat belt
Rear-view mirrors
- External rear-view mirrors
Instruments and tractor controls
- Instruments and tractor controls
- Instrument cluster
- Instrument cluster switches
- Right-hand console
- Left hand console
- Roll Over Protection Frame and seat belt
- Document pocket for the operator’s manual
- Fire extinguisher
- Hazard warning triangle
- Immobilising the tractor using the wheel chocks
- Toolbox
Other controls
- Control pedals
- Clutch control pedal
- Brake pedal
- Parking brake lever
- Accelerator pedal
- Mechanical hand throttle lever
- Transmission controls
USING THE TRACTOR
Introduction
- Engine – first 50 operating hours
Starting – Stopping the engine
- Starting the engine
- Switching off the engine
- Leaving the tractor in safe conditions
- Turbocharging using the turbocharger
- Leaving the tractor safely with a trailer hitched
Transmission
- Transmission
Four-wheel drive – Differential lock
- Engaging front wheel drive
- Front and rear differential locks
Braking
- Brakes, “SEPARATE BRAKES” Valve
- Hydraulic trailer braking
Rear PTO
- Rear PTO – definition and versions
- Rear PTO controls and indicator lamps
- Controlling the rear PTO
- Coupling and uncoupling PTO-driven implements
Hydraulic rear lift
- Hydraulic lift
- Rear lift with mechanical “LOAD SENSING” control
3-point linkage
- 3-point linkage
- Adjusting the 3-point linkage
- Hitching and unhitching implements to/from the 3-point linkage
Hydraulic system
- Hydraulic system
- Auxiliary hydraulic control valve
- Types of auxiliary hydraulic distributor
- Remote valve controls
- Remote control valve operation
Towing devices
- Towing devices
- Trailer towing eye-towing hitch compatibility
- Technical characteristics of towing hitches
- Adjusting the height of the towing hitches
- Drawbar
- Angle brackets for towing hitches
- Hitch support frame
- Towing hitch with lock pin
- Semi-automatic towing hitch
- Automatic towing device
- Front towing hitch
STORING THE TRACTOR
Storing the tractor
- Overview of procedures
- Operations prior to a long period of non-use
- Operations after a long period of non-use
Decommissioning and scrapping the tractor harvester and disposing of packaging materials
- Decommissioning the tractor
- Scrapping the tractor
- Disposing of packaging materials
MAINTENANCE OPERATIONS
Maintenance warnings
- Safe maintenance
Washing the tractor and implements
- Warnings
- Hazards and protective devices
- Required equipment
- Starting conditions
- Washing the exterior of the tractor
- Washing the interior of the cab
- Fluids – Lubricants and fill volumes
- Service intervals
- Maintenance table – 1st Service
- Maintenance table
Accessing the engine compartment
- Accessing the engine compartment
Daily intervention
- General inspection of tractor
- Checking the engine oil level
- Checking the coolant level
- Checking the fuel level
- Bleeding the fuel circuit
- Check the electrical system
- Checking the protective structure and seat belt
Maintenance every 50 hours
- Check the transmission oil level
- Checking brake reservoir oil level
- Grease the rear axle
- Greasing the pivot system of the 2WD front axle
- Greasing the 4WD front axle
- Greasing the rear 3-point linkage
- Checking wheels and tyres
- Maintenance of towing devices
- Check the ballast weights
- Check the state of wear of the gaiters of the steering system
Maintenance at 100 hours (1st service)
- Contact an authorised service centre
- Checking the braking distance
- Changing the engine oil
- Changing the engine oil filter cartridge
- Checking and cleaning the radiator
- Changing the fuel filter
- Checking the oil pipelines
Maintenance every 300 hours
- Checking the front axle oil level (4WD)
- Bleeding the hydraulic braking system
- Check the battery
Maintenance every 600 hours
- Changing the transmission oil filters
Maintenance every 1200 hours or at least once a year
- Cleaning the engine air filter – Changing the filter element
Maintenance every 1200 hours or at least every two years
- Changing the coolant and flushing the circuit
- Changing the transmission oil
- Changing the differential oil, planetary reduction unit oil and side final drives oil (4WD)
General maintenance
- Check the brake pedals
FAULT DIAGNOSIS
Towing the tractor in the event of a breakdown
- Warnings
- General rules for towing the tractor in the event of a breakdown
- Preparing tractor for towing
Transporting a disabled vehicle
- Warnings
- Characteristics of the vehicle to be used to transport the disabled tractor
- Precautions for loading the tractor safely
- Precautions for transporting the tractor safely
Lift the tractor
- Warnings
- Lifting tractor completely
- Lifting one tyre
- Lifting front or rear of the tractor
- Lifting front of the tractor to adjust steering angle and axle suspension excursion
- Engine troubleshooting
- Gearbox troubleshooting
- Power take-off troubleshooting
- Front wheel drive troubleshooting
- Brake fault diagnosis
- Lift troubleshooting
- Hydraulic system troubleshooting
- Hydraulic remote valves troubleshooting
- Electrical system troubleshooting
- Fault diagnosis
WHEELS
Introduction
- Basic information concerning tyres
- Punctures and changing tyres
- Wheel nut/screw tightening torques
- Steering angle adjustment
- Adjusting steering angle for axles with four limit screws
- Adjusting steering angle for axles with two limit screws
Tyre combinations
- Permissible tyre combinations
- Tyre load capacity
- Calculation of the mechanical lead
Track width calculation
- Minimum track width
- Track width adjustment
Ballasting
- Weighing the tractor
- Tractor/implement combination
- Ballasts
- Ballast mount
- Suitcase ballast weights
- Liquid ballast for tyres
ELECTRICAL SYSTEM
- Introduction to the electrical system
Battery
- Battery
Cab fuse box
- Fuse box
- Key to fuse and relay symbols
Lights for road use
- Lights for road use
- Headlight alignment
Worklights
- Work lights
Accessories
- Installation of electronic components and/or equipment
- Power outlet sockets
TECHNICAL DATA
Technical data of the tractor
- Technical data
- Coolant
- Fuels and additives
- Noise
- Maximum towable masses
- Driving seat’s vibrations
- Ballasts – Technical data
Dimensions and weights
- Dimensions and weights of the tractor
- Tractor speeds
Implement attachment diagrams
- Implement coupling hole layouts (FRUTTETO3 55 NATURAL -> ZKDCK40200RS10001, FRUTTETO3 65 NATURAL -> ZKDCK70200RS10001, FRUTTETO3 75 NATURAL -> ZKDCL00200RS10001)
- Implement coupling hole layouts (FRUTTETO3 80.4 NATURAL -> ZKDCL30200RS10001)
