Document overview
Operator's manual for SAME EXPLORER³ 85 → ZKDL1302W0TS16001 from the EXPLORER³ (STAGE 3A) family. Digital PDF in English, 372 pages.
The original table of contents contains 63 sections and 227 detailed topics, providing a clear view of the systems and procedures covered by this edition.
- IDENTIFICATION
- SAFETY
- GETTING TO KNOW THE TRACTOR
- )
- ,EXPLORER3 100 -> 16001,EXPLORER3 110 -> 5001)
- ,EXPLORER3 100 -> 20001,EXPLORER3 110 -> 1001)
- USE OF THE LOADER
- > 5001)
- STORAGE OF THE TRACTOR
- MAINTENANCE OPERATIONS
- TROUBLESHOOTING
- WHEELS
Document details
- Brand: SAME
- Family: EXPLORER³ (STAGE 3A)
- Model: EXPLORER³ 85
- Starting serial number: ZKDL1302W0TS16001
- Document type: Operator's manual
- Language: English
- Pages: 372
- File size: 24.50 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that the model and starting serial number of your machine match EXPLORER³ 85 → ZKDL1302W0TS16001.
Complete table of contents
IDENTIFICATION
- List of model serial numbers
Identifi cation plates
- Tractor identifi cation plates
- Tractor serial number
- Engine number
- Engine identifi cation plate
- ROPS identifi cation plate
Original spare parts
- When ordering replacement parts, please supply the following information:
Warranty
- Delivery and installation
- Warranty procedure
- Transport
- Post-warranty assistance
SAFETY
- Introduction
Practical advice on safe working procedures
- Protect the Environment
- General safety rules
Accident prevention and safety
- Safety clothing and equipment
- Exposure to noise
- protection and safety devices
- Checking the tractor and implements
- Getting up and down from the tractor
- Storage of the tractor
- Cleaning the tractor
Operation
- Starting
- Checking indicator lights
- Starting fl uids
- Auxiliary equipment
- Towing safely
- Driving on the public highway
- Overturning
- Maintenance
ROPS (Roll Over Protective Structure)
- ROPS-FOPS-OPS
- Use of hazardous substances
Safety cab
- Emergency exits
- ROPS-FOPS-OPS
- Use of hazardous substances
Decommissioning and disposal of the tractor
- Decommissioning the tractor
- Decommissioning and disposal of the tractor
Safety decals
- Adhesive safety warning decals
GETTING TO KNOW THE TRACTOR
External views of the tractor
- Exterior views of tractor with ROPS
- Exterior views of tractors with standard cab
- Exterior views of tractors with high-visibility cab roof
Access to the driving position
- Access to the driving position for tractors with platform and ROPS
- Access to the driving position for tractors with cab
Seat
- Operator seats
- “GRAMMER MSG83/721” seat with mechanical suspension and PVC upholstery
- “GRAMMER MSG83/721” seat with mechanical suspension and fabric upholstery
- “GRAMMER MSG83/7L” seat with mechanical suspension and PVC upholstery
- “GRAMMER MSG83/7L” seat with mechanical suspension and fabric upholstery
- “GRAMMER MSG83/8” seat with pneumatic suspension and fabric upholstery
- Seat belt
- Passenger seat (EXPLORER3 85 -> 20001,EXPLORER3 100 -> 20001,EXPLORER3 110 ->
- Seat belt for the passenger seat.
Steering wheel
- Steering wheel
rear-view mirror
- External rear-view mirrors
Instruments and tractor controls
- Instruments and tractor controls
- Instrument panel (EXPLORER3 85 -> 16001,EXPLORER3 100 -> 16001,EXPLORER3 110
- Instrument panel
- Console switches
- Steering wheel stalk control
- Right-hand console
- Control switches in cab roof lining – left-hand side
- Control switches on cab roof lining – right-hand side
- Ventilation system
- Heating system
- Air conditioning system
- Cab air fi lter
- Cab
- Hazard warning triangle
- Wheel chock
- Toolbox
Other controls
- Control pedals
- Clutch pedal
- Brake pedal
- Parking brake lever (EXPLORER3 85 -> 16001,EXPLORER3 85 -> 20001,EXPLORER3 100
- Park Brake control (EXPLORER3 110 -> 1001)
- Accelerator pedal
- Electronic hand throttle
- Transmission controls for tractors with mechanical shuttle (EXPLORER3 85 ->
- Transmission controls for tractors with hydraulic shuttle (EXPLORER3 85 ->
- )
- ,EXPLORER3 100 -> 16001,EXPLORER3 110 -> 5001)
- ,EXPLORER3 100 -> 20001,EXPLORER3 110 -> 1001)
USE OF THE LOADER
Introduction
- Engine – fi rst 50 operating hours
Starting – Stopping the engine
- Starting the engine
- Switching off the engine
- Turbocharging using the turbocharger
Transmission
- Transmission
- Mechanical shuttle (EXPLORER3 85 -> 16001,EXPLORER3 100 -> 16001,EXPLORER3
- Hydraulic shuttle (EXPLORER3 85 -> 20001,EXPLORER3 100 -> 20001,EXPLORER3 110
Front wheel drive – Differential lock
- Front-wheel drive engagement
- Front and rear differential lock
Braking
- Brakes, “SEPARATE BRAKES” Valve
- Hydraulic trailer braking
- Mixed-automatic air braking system
Rear PTO
- Power take-off
- Rear PTO (540-1000 rpm)
- “ECONOMY MODE” power take-off
- Ground speed power take-off
Front PTO
- Front power take-off (1000 rpm)
Rear hydraulic lift
- Hydraulic lift
- LOAD SENSING mechanically controlled rear lift
Hydraulic front lift
- Front lift
3-point linkage
- Three-point hitch
Hydraulic system
- Hydraulic system
- Remote valve
- Types of remote control valve
- Remote valve controls
- Correspondence between the control levers and the rear hydraulic couplers
- Behaviour of the oil fl ow in the hydraulic circuit connecting the couplers and the actuator
Towing devices
- Towing devices
- Category “A” drawbar”
- Category II drilled drawbar
- Class “C” towing hitch
- Class “C” towing hitch with rapid height adjustment
- Italy version class “C” towing hitch
- Class “D” towing hitch
- Class “D2” towing hitch
- Class “D3” towing hitch
- “EEC” towing hitch
- “EEC” automatic towing hitch
- Austria version towing hitch
- Mechanical PICK-UP HITCH drawbar and towing hitch
- Hydraulic PICK-UP HITCH drawbar and towing hitch
- “France” version towing hitch
- Front towing hitch
- > 5001)
STORAGE OF THE TRACTOR
- Operations prior to long term garaging
- Preparing the tractor for use after a long period of storage
MAINTENANCE OPERATIONS
Maintenance operations
- Maintenance intervals
- Fluids / lubricants and fi ll volumes
- Service intervals
- Maintenance and inspection schedule
Access to the engine compartment
- Accessing the engine compartment
Daily intervention
- General inspection of the tractor
- Oil level check
- Checking coolant
- Fuel level check
- Bleeding the fuel circuit
- Checking the electrical system
Maintenance every 50 hours
- Checking the transmission oil level
- Greasing the rear axle
- Greasing the front axle (2WD)
- Greasing the front axle (4WD)
- Checking clutch and brake reservoir oil level
- Checking the battery
- Greasing the rear 3-point linkage
- Checking wheels and tyres
Maintenance at 100 hours – 1st Service
- Checking the braking distance
- Checking engine belt tension
- Changing the engine oil
- Changing the engine oil fi lter cartridge
- Checking that the radiator/coolers are clean
- Changing the fuel fi lter and settling fi lter
- Parking brake lever control – Park Brake control
- Checking the window washer system
- Cleaning the cab ventilation system fi lters
- Checking oil pipes – Hydrostatic steering
Maintenance every 250 hours
- Check front PTO oil level (4WD)
- Check front PTO oil level
Maintenance every 500 hours
- Renewing gearbox oil fi lters, hydrostatic steering, lift
- Checking the differential lock system
- Renewing the oil fi lter of the hydrostatic steering return circuit for tractors equipped with a
- Checking the braking system with safety brakes valve
- Changing front PTO oil and oil fi lter cartridge and cleaning front PTO wire mesh fi lter
Maintenance every 1000 hours or at least once a year
- Servicing the fuel injection pump
- Cleaning engine air fi lter – Changing air fi lter cartridge and internal safety cartridge
- Servicing the starter motor
- Bleeding air from the hydraulic circuit of the front and rear brakes
- Cab heating system maintenance
- Cab air conditioning system maintenance
- Bleeding the hydraulic clutch circuit
Maintenance every 1000 hours or at least every two years
- Changing the coolant and fl ushing the circuit
- Changing the transmission oil
- Changing the front wheel hub oil (2WD)
- Changing the differential oil, planetary reduction unit oil and side fi nal drives oil (4WD)
TROUBLESHOOTING
Towing the tractor
- Towing with the engine running
- Towing with the engine off
- Safe transport of the tractor
- Lifting the tractor
- Engine troubleshooting
- Gearbox troubleshooting
- Front and rear power take-off troubleshooting
- Front wheel drive troubleshooting
- Brakes troubleshooting
- Lift troubleshooting
- Hydraulic system troubleshooting
- Hydraulic directional control valves troubleshooting
- Cab troubleshooting
- Electrical system troubleshooting
- Tractor troubleshooting
Transmission and hydraulic shuttle alarms
- Display of alarms
Instrument panel alarms
- Display of alarms
- PTO selfdiagnosis indicator light
WHEELS
Introduction
- General information regarding tyres
- Punctures
Tyre combinations
- Permissible tyre combinations
Track width calculation
- Minimum track width
- Track width adjustment
- Adjustment of the front fenders (2WD)
- Adjustment of the front fenders
Ballast weights
- Handling ballast weights
- Ballast for tractor
- Front ballast with cast-iron blocks
- Front one-piece ballast block (EXPLORER3 85 -> 16001,EXPLORER3 85 ->
- Front one-piece ballast block (EXPLORER3 100 -> 20001,EXPLORER3 110 -> 1001)
- Ballast for wheels with metal discs
- Ballast for wheels with water-fi lled tyres
- ,EXPLORER3 100 -> 16001,EXPLORER3 110 -> 5001)
ELECTRICAL SYSTEM
Battery
- Battery
Fuse box
- Fuse box
- Key to fuse and relay symbols
Lights for road use
- Lights for road use
- Headlight alignment
- Road lights – North America version
Worklights
- Work lights for tractors with platform
- Work lights for tractors with cab
- Interior courtesy light
Accessories
- Installation of additional electronic components and/or equipment
- Power outlet sockets
TECHNICAL DATA
- Declaration of conformity
Technical data
- Technical data
- Fuel – technical characteristics
- Biofuels – technical characteristics
- Coolant
- Noise level
- Vibration referred to the operator position
Dimensions and weights
- Dimensions and weights of the tractor
Implement attachment diagrams
- Implement coupling holes diagram
