Document overview
Digital Workshop Manual documentation for model SAME TIGER 70 → S10S673WTE1001 from the TIGER (STAGE 2) family. Language: English; 781 pages.
The corresponding English table of contents contains 41 sections and 262 individual topics.
Main sections included
- Introduction
- Safety
- Technical characteristics
- Calibrations and electronic diagnosis
- Method of intervention
- Wiring diagrams
- Service Info
Document details
- Brand: SAME
- Family: TIGER (STAGE 2)
- Model: TIGER 70
- Starting serial number: S10S673WTE1001
- Document type: Workshop Manual
- Language: English
- Pages: 781
- File size: 113.14 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that your machine model and reference code match SAME TIGER 70 → S10S673WTE1001.
Complete table of contents
Introduction
- Introduction – Engines
- Identification of the engine type and serial number position, Europe version
- Identification of the engine type and serial number position, EPA version
- Injection pump type identification
- Injector type identification
- Tightening Torques
- Units of measurement and conversion factors
Safety
Preface
- Important notes concerning safety
Important safety information
- Recognising hazards
- Indications for persons in contact with the tractor
Safety rules
- Risks during tractor preparation
- Risks during maintenance
- Work on machine systems
- Special disassembly/assembly/inspection procedures
Safety pictograms
- Replacing safety pictograms
Environmental risks
- Hazards associated with the operating environment
Technical characteristics
Engine
- Engine block technical data – cylinders
- Crankshaft technical data
- Crankshaft technical data
- Crankshaft technical data
- Piston technical data – Piston rings
- Piston technical data – Piston rings
- Piston technical data – Piston rings
- Piston technical data – Piston rings
- Connecting rod technical data
- Connecting rod technical data
- Camshaft technical data – static advance of 13°
- Camshaft technical data – static advance of 16°
- Timing gears technical data
- Counter-rotating weights technical data
- Technical data and dimensions of valves – valve springs
- Technical data and dimensions of cylinder heads – valve guides – valve seats
- Technical data and dimensions of rocker arms – rocker shafts – tappets
- Engine injector technical data (aspirated versions)
- Engine injector technical data (with turbocharger)
- Injectors technical data (turbo-intercooler engines)
Engine accessories
- Engine stop solenoid valve
Transmission
- Transmission
- P.T.O. rear
Rear axle
- Rear axle
- Rear differential assembly
Front axle
- Front axle
Hydraulic system
- Hydraulic system
- Steering circuit pump – lift circuit
- Power steering valve
- Remote control valve
- Hydraulic lift control valve
- Separate-Brakes valve
Calibrations and electronic diagnosis
Diagnostic tool screens
- Preheating control unit
Method of intervention
B0 – Engine
- Engine – Separation from the transmission
- ENGINE
- Flywheel
- Alternator belt-water pump-fan
- Checking engine belt tension
- Belt alignment adjustment
- Changing the engine oil filter cartridge
- Preliminary and final operations
- Final engine checks
- Checking engine block
- Crankshaft
- Crankshaft checks
- Flywheel checks
- Renewal of crankshaft rear oil seal
- Pistons and cylinder liners
- Pistons and rings check
- Cylinder liners check
- Check connecting rods – gudgeon pins – rod cap screws
- Camshaft
- Camshaft checks
- Timing gear checks
- Adjusting timing gears backlash
- Valve timing
- Counter-rotating weights
- Overhaul of counter-rotating weights assembly
- Counter-rotating weight checks
- Valves check
- Valve seats check
- Valves sealing check
- Valves adjustment
- Valve guides check and replacement
- Inspecting the rocker arms and rocker shafts
- Cylinder heads
- Valve springs check
- Heat exchanger removal
- Disassembly of the heat exchanger
- Lubrication pump
- Lubrication pump disassembly
- Oil sump
- INJECTION PUMPS, GOVERNOR AND FUEL SUPPLY
- Injection pump timing
- Injectors assembly
- Checking injectors protrusion – Renewal of copper bushes
- Injectors check
- Injection pumps control rod
- Overhaul of the mechanical governor (standard and with LDA valve)
- Overhaul of the mechanical governor gear
- Adjusting electronic actuator
- Installation of mechanical governor drive unit and electronic governor support
- Power adjustment data table
- Engine coolant pump
- Thermostatic valve
- Checking the thermostat valve
- Cooling and intake ducts
C0 – Engine accessories
- Changing the coolant and flushing the circuit
- Engine cooling system radiator
- Compensation tank
- Fan
- Air cleaner assembly
- Bleeding the fuel circuit
- Fuel tank and float
- Engine STOP solenoid valve
- Starter motor
- Exhaust pipe
- Silencer
D0 – Transmission
- Changing the transmission oil
- Clutch plate
- Clutch plate wear check
- Pressure plate assembly
- Primary shaft disassembly
- Secondary shaft disassembly
- Adjustment of end float on secondary shaft gears
- Mechanical gearbox – Complete assembly
- Mechanical gearbox – Complete assembly – Disassembly
- Clutch housing – Separation from the gear box
- Range selector rod
- GEAR SELECTOR ROD
- Bevel gear adjustments
- Rear pinion
- 4WD output shaft
- PTO output shaft.
- PTO input shaft.
- Propeller shaft – Front axle drive shaft
- Gear lever disassembly
- Handbrake lever adjustment
- 4WD engagement device
- Reverse gear shaft disassembly
E0 – Rear axle
- Rear axle, brake support, semi-axle and brake disk
- Rear axle
- Planet gear unit disassembly
- Rear differential – complete assembly
- Rear differential disassembly
- Bleeding air from the hydraulic circuit of the front and rear brakes
- Friction shoe replacement
- Rear axle brake piston
F0 – Front axle
- Front pivot bracket
- Front axle – Complete assembly
- Adjusting front axle end float
- Steering cylinder
- Steering cylinder disassembly
- Steering knuckle housing and axle shaft
- Adjustment of bearing preload
- PINION-DIFFERENTIAL ASSEMBLY
- Differential lock device
- Differential locking device adjustment
- Bevel gear pair disassembly
- Front axle differential – Complete assembly – Disassembly
- Adjustment of the differential preload
- Adjustment of the pinion position
- Adjustment of pinion and ring gear backlash
- Adjusting pinion bearings preload
- Side gear
- Side gear
- Front brake discs
- Front axle brake piston
G0 – Bodywork – Cab – Platform
- Platform
- Hood and side panels
- Hood and side panels
- Covering and platforms
- Rear fender
- Instrument panel
- Lower instrument panel
- Brake master cylinders
- Steering wheel
- Lift control lever adjustment
- Folding ROPS frame
H0 – Hydraulic system
- Hydrostatic steering valve pump/services pump support
- hydrostatic steering valve pump/services pump support disassembly
- Hydrostatic steering valve pump/services pump support gear play adjustment
- Auxiliary services pump
- Power steering pump
- Hydrostatic steering valve – Complete assembly
- Power steering disassembly
- Pressure relief valve setting
- Auxiliary services control valve – Complete assembly
- Checking brake reservoir oil level
L0 – Electrical system
- Battery
- Alternator
- Brake lights bulb
R0 – Rear lift
- Rear lift – Complete assembly
- Rear lift – complete assembly – Disassembly
- Lift cylinder disassembly
- Renewal of the bushes
- Hydraulic lift control valve
- Disassembly of the lift control valve
- Mechanical draft sensor
- Mechanical draft sensor disassembly
S0 – Wheels
- Front wheels
- Rear wheels
V0 – Ballast – towing hitches
- Support and towing hitch
Wiring diagrams
Introduction
- Structure of the unit
- Wiring and components index
Components
- Components
Systems
- Earthing points
- Starting and pre-heating
- Lighting
- Instrument panel
- Worklights
- Brakes
Wiring harnesses
- Front wiring loom – 0.015.3655.4
- Position of front wiring connectors
- Battery leads wiring – 0.015.3649.4
- Battery wiring connector positions
- Preheating wiring – 0.015.3653.4
- Pre-heating wiring connector positions
- Worklights wiring loom – 0.015.3645.4
- Position of hood lights wiring connectors
- Central wiring – 0.015.3656.4
- Central wiring connector positions
- Direction indicator/emergency lights ECU wiring loom – 0.015.3654.4
- Direction indicator/emergency lights ECU wiring loom connector positions
- Rear wiring – 0.015.3647.4
- Position of rear wiring loom connectors
- Number plate light wiring loom – 0.015.3650.4
- Number plate light wiring loom connector positions
Service Info
A0 – TRACTOR
- Diagnostics 2026 subscription
- After-sales 2026 subscription
- SERVICE NEWS RESEARCH GUIDE
- Diagnostics 2025 subscription
- After-sales 2025 subscription
- Diagnostics 2023 subscription
- Diagnostics 2024 subscription
- Diagnostics 2022 subscription
- Diagnostics 2021 subscription
- Technical Documentation DVD 06/2009
- Technical Documentation DVD 07/2008
- SDF LUBRICANTS: Lubricant oils and coolant fluids
- After-sales 2024 subscription
- After-sales 2023 subscription
- After-sales 2022 subscription
- After-sales 2021 subscription
- After-sales 2019 subscription
- SDF Parts and SDF Service DVV 04/2014, version 26
- Technical Documentation DVD 03/2010
- New function: Download PDF manuals
- Diagnostics – 2020 subscription
- After-sales – 2020 subscription
- After-sales – 2018 subscription
- Service and Spare Parts – 2017 Subscription
- SDF Parts and SDF Service DVDs 05/2014 version 25
- SDF Parts and SDF Service DVDs 03/2013 version 24
B0 – ENGINE
- Flushing the lubrication circuit
- Checking correct projection distance of injectors
- Recommendations when using tractors equipped with SAME 1000.W 3 – 4 cylinder Tier II (Euro II) engines
- Deutz AG engine oil specifications
C0 – ENGINE ACCESSORIES
- Diagnostic protocol – AdBlue – Float level unit
- Filter and prefilter tool p/n 5.9035.865.0
F0 – FRONT AXLE
- Workshop manual update – Planetary reduction gearbox
- Check the front axle steering knuckles for wear
- Steering behavior check procedure
G0 – BODYWORK – CAB
- Air conditioning system recharging
H0 – HYDRAULIC AND PNEUMATIC SYSTEM|
- Hydraulic CUNA trailer braking kit (ITALY)
- Single connection hydraulic braking kit availability update – only for EUROPEAN market
- L0 – ELECTRIC AL SYSTEM
