Document overview
Operator's manual for SAME LASER 130 → DF1DP602W0CS10001 from the LASER NEW family. Digital PDF in English, 300 pages.
The original table of contents contains 71 sections and 232 detailed topics, providing a clear view of the systems and procedures covered by this edition.
- IDENTIFICATION
- SAFETY
- GETTING TO KNOW YOUR TRACTOR
- USING THE TRACTOR
- WHEELS
- BALLASTING
- ELECTRICAL SYSTEM
- MAINTENANCE OPERATIONS
- TROUBLESHOOTING OF FAULTS AND EMERGENCIES
- TECHNICAL DATA
Document details
- Brand: SAME
- Family: LASER NEW
- Model: LASER 130
- Starting serial number: DF1DP602W0CS10001
- Document type: Operator's manual
- Language: English
- Pages: 300
- File size: 19.19 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that the model and starting serial number of your machine match LASER 130 → DF1DP602W0CS10001.
Complete table of contents
IDENTIFICATION
Tractor identification
- Models and serial numbers
- Make a note of your tractor data
- Ordering spare parts and supplementary equipment
- Identification plates
- Change of ownership of the tractor.
Glossary
- Technical terms used in this manual
- Acronyms used in this manual
- Units of measurement used in this manual and conversion factors
Warranty
- Warranty terms and conditions
- Exclusions to the warranty
- Intended use
- Conditions rendering the warranty null and void
Component icons
- Icons used in this manual
SAFETY
Preface
- Operator safety manual
- About this manual
- Responsibilities and obligations
Important safety information
- Correct and incorrect use of the tractor
- Recognising hazards
- Indications for persons in contact with the tractor
Safety prescriptions
- Danger areas
- Risks during tractor preparation
- Risks when driving in the field and on the road
- Risks during maintenance
- Using the front loader
Safety and protection devices
- Safety devices
- Protective devices
- ROPS roll bar
Good practice
- Good working practices
Safety pictograms
- Introduction to safety pictograms
- Safety pictograms
Hazards connected to the environment
- Hazards associated with the operating environment
- Hazards on the tractor
GETTING TO KNOW YOUR TRACTOR
Views of the tractor
- External views of the tractor
- Tractor interior views
Boarding the vehicle
- Elements for accessing the driver seat for tractors with a 4-pillar safety structure
- Elements for accessing driver seat for tractors with cab
Cab
- Operator Protective Structure.
- Internal illumination
- Front sun blind
- Windscreen hatch
- rear window hatch
- Air conditioning vents
- Document pocket for the operator’s manual
Instruments and controls
- Front console
- Instrument cluster
- Right-hand console
- Left hand console
- Roof panel
- Provision for installation of radio and speakers
USING THE TRACTOR
Boarding the vehicle
- Climb on and off the tractor with a 4-pillar safety structure
- Climbing onto and off the tractor, tractors with cab
- Emergency exit
Initial adjustments
- Adjusting the steering wheel
- Adjusting the GRAMMER operator seat
- Adjusting the GRAMMER operator seat
- Fastening and unfastening the operator’s seat belt
- Passenger seat
- Manually adjusting the rear-view mirrors
Commonly used controls
- Shuttle lever
- Front steering column stalk/windscreen wiper
- Clutch pedal
- Accelerators
- Brakes
- Parking/emergency brake
- Cab air conditioning
Parking the vehicle
- Leaving the tractor in safe conditions
- Immobilising the tractor using the wheel chocks
Engine
- Recommendations for first 50 operating hours
- Fuels and additives
- Refuelling
- Starting and stopping the tractor
Transmission
- Introduction to the transmission
- Transmission controls and indicator lamps
- Selecting work range, gear and drive direction
- Driving the tractor
- Front wheel drive and differential locks
PTO
- PTO configurations
- Coupling and uncoupling PTO-driven implements
Rear PTO
- Rear PTO description and configurations
- Rear PTO controls and indicator lamps
- Controlling the rear PTO
Lifts
- Lift configurations
Rear lift
- Rear lift
- Mechanical rear lift controls
- Setting the operating mode of the mechanical rear lift
- Operating the mechanically controlled rear lift
- Rear 3-point linkage
- Adjusting the 3-point linkage
- Hitching and unhitching implements to/from the 3-point linkage
Hydraulic system
- Hydraulic distributor configurations
- Remote valve operating modes
- Hydraulic distributor controls and indicator lamps
- Connecting/disconnecting an implement to/from the hydraulic distributors
- Operating the hydraulic distributors
- Example of operating a reversible plough
- Example of operating a hydraulic motor
- Example of operating the tipping trailer
Towing
- Towing devices
- Technical characteristics of towing hitches
- Hydraulic trailer braking
- Connecting the electrical system of the trailer
Towing devices
- Adjusting the height of the towing hitches
- Drawbar
- Towing hitch with lock pin
Monitoring and programming
- Using the instrument panel display
- Instrument panel display parameters
WHEELS
Tyres
- Basic information concerning tyres
- Punctures and changing tyres
- Wheel nut/screw tightening torques
- Steering angle adjustment
- Adjusting steering angle for axles with four limit screws
- Adjusting steering angle for axles with two limit screws
- Front/rear tyre combinations (LASER 130 -> DF1DP602W0CS10001)
- Front/rear tyre combinations (LASER 145 -> DF1DP802W0CS10001)
- Front/rear tyre combinations (LASER 165 -> DF1DR102W0CS10001, LASER 180 -> DF1DR302W0CS10001)
- Inflation pressure (LASER 130 -> DF1DP602W0CS10001)
- Inflation pressure (LASER 145 -> DF1DP802W0CS10001)
- Inflation pressure (LASER 165 -> DF1DR102W0CS10001, LASER 180 -> DF1DR302W0CS10001)
- Load capacities of radial tyres and speed ratings
- Load capacities of conventional/cross-ply tyres and speed ratings
Adjustments
- Calculating the mechanical lead
- Axle width (LASER 130 -> DF1DP602W0CS10001)
- Axle width (LASER 145 -> DF1DP802W0CS10001)
- Axle width (LASER 165 -> DF1DR102W0CS10001, LASER 180 -> DF1DR302W0CS10001)
- Adjusting track widths (LASER 130 -> DF1DP602W0CS10001)
- Adjusting track widths (LASER 145 -> DF1DP802W0CS10001)
- Adjusting track widths (LASER 165 -> DF1DR102W0CS10001, LASER 180 -> DF1DR302W0CS10001)
- Adjustable front mudguards
BALLASTING
Stability
- Weighing the tractor
- Tractor/implement combination
Ballasting
- Ballasts
- Ballast mount
- Intermediate plate
- Front support ballast
- Suitcase ballast weights
- Monolithic block
- Metal discs for wheels
- Liquid ballast for tyres
ELECTRICAL SYSTEM
- Introduction to the electrical system
Battery
- Battery
Fuses
- Fuses and relays
Lights
- Replace the bulbs in the road lights
- Adjust the headlights for road travel
- Replace the bulbs in the work lights
- Changing the interior courtesy light bulbs
Other equipment
- Installation of electronic components and/or equipment
- Electrical power sockets/ports
MAINTENANCE OPERATIONS
Maintenance warnings
- Safe maintenance
Washing the tractor and implements
- Warnings
- Hazards and protective devices
- Required equipment
- Starting conditions
- Washing the exterior of the tractor
- Washing the interior of the cab
Accessing the engine compartment
- Warnings
- Hazards and protective devices
- Starting conditions
- Overview of procedures
- Open and close the cowl
- Tool box
Storing the tractor
- Overview of procedures
- Operations prior to a long period of non-use
- Operations after a long period of non-use
Fluids and lubricants
- Fluids – Lubricants and fill volumes
- Coolant
Intervals
- Maintenance service
- Maintenance table – 1st Service
- Maintenance table
Tractor
- General inspection of tractor
- Lubrication and greasing
- Contact an authorised service centre
Engine
- Check and top up the engine oil level
- Change the engine oil
- Changing the engine oil filter
- Check and top up the coolant level
- Changing the engine coolant
- Clean the radiator and coolers
Engine accessories
- Changing the engine air filter cartridges
- Drain water and sediment from the fuel prefilter
- Replacing the fuel filter
- Replacing the fuel prefilter
- Bleed air from the fuel circuit
Transmission
- Checking and topping up the transmission oil level
- Changing the transmission filter
- Change the transmission oil
Front axle
- Checking and topping up oil level in front axle and final drive units
- Change the oil in the front axle and final drive units
Cab
- Check the liquid detergent level
- Cleaning and replacing the internal cab air filters
- Clean and replace the external cab air filters
Hydraulic and pneumatic system
- Checking the oil lines
- Check and top up the brake fluid level
Electrical system
- Check and top up the battery electrolyte level
Wheels
- Checking wheels and tyres
Ballast and hitches
- Maintenance of towing devices
- Check the ballast weights
TROUBLESHOOTING OF FAULTS AND EMERGENCIES
Fault diagnosis
- Introduction to alarms
- Introduction to troubleshooting
- Troubleshooting for entire tractor
- Engine troubleshooting
- Transmission troubleshooting
- PTO troubleshooting
- Lift troubleshooting
- Brakes troubleshooting
- Hydraulic system troubleshooting
- Distributor troubleshooting
- Cab troubleshooting
- Electrical system troubleshooting
Emergencies
- Emergency types
- Emergency starting
- Towing a disabled vehicle
- Front emergency tow device
- Transporting a disabled vehicle
- Lift the tractor
TECHNICAL DATA
Main technical data
- Introduction
- Tractor technical data
- Operator cab technical data
- Noise technical data
- Vibrations technical data
- Power delivered by the front PTO
- Power delivered by the rear PTO
- Maximum towable mass
Ballasts – Technical data
- Available ballasts
- Dimensions and weights of the tractor
Tractor speed (LASER 130 -> DF1DP602W0CS10001, LASER 145 -> DF1DP802W0CS10001)
- Tractor speed
- Speed conversion table
Tractor speed (LASER 165 -> DF1DR102W0CS10001, LASER 180 -> DF1DR302W0CS10001)
- Tractor speed
- Speed conversion table
Tool/equipment coupling diagrams (LASER 130 -> DF1DP602W0CS10001, LASER 145 -> DF1DP802W0CS10001)
- Technical considerations for attaching tool/equipment to the tractor
- Tool/equipment attachment holes
Tool/equipment coupling diagrams (LASER 165 -> DF1DR102W0CS10001, LASER 180 -> DF1DR302W0CS10001)
- Technical considerations for attaching tool/equipment to the tractor
- Tool/equipment attachment holes
