Document overview
Workshop Manual PDF for LAMBORGHINI MACH 230 VRT → WSXFT30200LL10001, MACH VTR (STAGE 5) family. Document language: English; 1,862 pages.
The corresponding English table of contents contains 46 sections and 710 individual topics.
Main sections included
- Introduction
- Safety
- Technical characteristics
- Calibrations and electronic diagnosis
- Method of intervention
- Wiring diagrams
- Service Info
Document details
- Brand: LAMBORGHINI
- Family: MACH VTR (STAGE 5)
- Model: MACH 230 VRT
- Starting serial number: WSXFT30200LL10001
- Document type: Workshop Manual
- Language: English
- Pages: 1,862
- File size: 406.87 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that your machine model and reference code match LAMBORGHINI MACH 230 VRT → WSXFT30200LL10001.
Complete table of contents
Introduction
- Tightening Torques
- Pump tightening torques
- Installation of solenoid valves and cartridge valves
- Installation of quick couplers
- Units of measurement and conversion factors
Safety
Preface
- Important notes concerning safety
Important safety information
- Recognising hazards
- Indications for persons in contact with the tractor
Safety rules
- Risks during tractor preparation
- Risks during maintenance
- Work on machine systems
- Special disassembly/assembly/inspection procedures
Safety pictograms
- Replacing safety pictograms
Environmental risks
- Hazards associated with the operating environment
Technical characteristics
Engine
- Technical data – Pressure/temperature transmitter
- Technical data – Pressure transducer
- Pressure transducer
- Technical data – Pressure transducer
- Pressure sensor
- Technical data – Pressure transducer
- Pressure transducer
- Technical data – Pressure sensor
- Technical data – Temperature transmitter
- Technical data – Temperature transmitter
- Technical data – Temperature transmitter
- Temperature sender
- Technical data – Temperature transmitter
- Technical data – Temperature transmitter
- Technical data – Speed indicator
- Technical data – Speed indicator
- Technical data – Speed indicator
- technical specifications – NOx sensor (24 V)
- technical specifications – NOx sensor (12 V)
Transmission
- Transmission (50 Km/h)
- Transmission (60 Km/h)
- System diagram
- Description of function
- Transmission control
Front axle
- Specifications
- Maintenance
Bodywork – Cab – Platform
- Air conditioning system
Hydraulic system
- Front suspension system – INTEGRAL accumulators
- Hydraulic system basic version
- Hydraulic system, full house version
- Basic hydraulic system (“Mother Regulation”)
- Hydraulic system, full house version (“Mother Regulation”)
- Hydraulic system, optional version (“Mother Regulation”)
- 45 cc variable displacement pump
- 63 cc variable displacement pump
- Hydraulic pump
- Load sensing valve, pressure cut-off valve
- Priority valve
- Power steering
- Hydraulic front axle suspension
- Servo-brake valve for front axle
- Hydraulic trailer braking system – Italy version
- Hydraulic trailer braking system – Export version
- Steering gear pump – Version without compressor
- Steering gear pump – Version with compressor
- Braking system
- Master cylinder
- Remote control valve – 8-way version
- Ancillary utility distributor – 10-way version
- Remote control valve – 12-way version
- Remote control valve – 14-way version
- Braking system
- Compressor
- Pressure limiting valve
- Trailer air braking valve (1-way)
- Trailer air braking valve (2-way)
- Pneumatic trailer braking valve with unbraked front axle (2-way)
Front PTO
- Front PTO
Calibrations and electronic diagnosis
- ECUs
Diagnostic tools
- D-Tech and diagnostic ports
- D-TECH App
Commissioning and calibrating the tractor
- Commissioning procedure (EOL)
- ECU Reset
- Set vehicle model (SECU)
- Transmission Control Unit (TCU) initialization
- ECUs initialization
- Distributors configuration
- Maximum vehicle speed
- Tyre type
- Language
- Measurement unit
- Air brake
- Front Power Take-Off (PTO)
- Radar
- Automatic Air Conditioning
- iMonitor
- ISO 11786
- Isobus
- MMI (man machine interface)
- Agrosky
- Font Susp
- ASM (Automatic Steering Management)
- Front speed sensor
- Ext cylinders
- Oil pump displacement
- Stoll
- Engine brake
- Auxiliary tank
- Wet brake
- Pneumatic trailer brake
- Hydraulic trailer brake
- PTO front ratio configuration
- Distributors command calibration neutral
- Clutch pedal calibration
- Throttle pedal calibration
- Hand gas calibration
- Park brake parameter configuration
- Slope sensor calibration
- Water mix motor calibration
- Recirculation Motor calibration
- Draft sensor calibration
- Rear hitch position calibration
- Front hitch calibration
- Front suspension calibration
- Wheel angle sensor calibration
- Transmission calibration
- PTO calibration
- Front speed sensor calibration
ECU alarms
- SDF Severity of alarms
- ECU ALARMS
Software management
- Engine dataset upgrade
Method of intervention
- Workshop tools for front axle
B0 – Engine
- Separating engine / transmission
- Engine
- Disassembling and assembling alternator (poly-V-belt, level 1)
- Disassembling and assembling crankcase breather
- Replacing the crankshaft O-ring (opposite end to flywheel)
- Disassembling/assembling crankshaft wear sleeve (side opposite flywheel)
- Disassembling and assembling the front cover (fixing elements)
- Assembly and disassembly of piston cooling nozzles
- Assembly and disassembly of piston cooling nozzles
- Checking the camshaft bearing
- Removing and refitting crankshaft bearing cap
- Blanking elements
- Blanking elements
- Blanking elements
- Blanking elements
- Oil dipstick
- Oil dipstick
- Pipe (crankcase breather)
- Disassembling and assembling the lubricant oil sump (pressed steel sump)
- Removing and fitting lubricant oil sump (heavy version)
- Removing and fitting lubricant oil sump (heavy version)
- Removing and fitting lubricant oil sump (heavy version)
- Oil filler neck
- Disassembling and assembling the torsional vibration damper
- Disassembling and assembling the torsional vibration damper
- Disassembling and assembling the torsional vibration damper
- Disassembling and assembling the flywheel (fixing elements)
- Replacing the starter motor ring gear on the flywheel
- Removing and fitting the crankshaft
- Check the crankshaft
- Check the endfloat of the crankshaft
- Assembly and disassembly of the crankshaft bearing
- Check the crankshaft bearings
- Disassembly and reassembly of connecting rod shank
- Check the connecting rod shank
- Disassembling and assembling the piston
- Check the piston
- Check the piston
- Check the piston rings
- Check the piston rings
- Check the piston rings
- Compression test
- Checking compression
- Disassembling and assembling the cylinder head cover
- Removing and fitting the cylinder head cover
- Removing and fitting the cylinder head cover
- Removing and fitting the cylinder head cover
- Disassembling and assembling the piston rings
- Disassembling and assembling the cylinder head (fasteners)
- Disassembling and assembling the cylinder head (fasteners)
- Measuring piston protrusion
- Assembly and disassembly of the valves
- Removing and fitting the valves
- Checking valves, valve guides, valve springs and valve recess
- Replacing the injector bush
- Clean the injector bush
- Clean the injector bush seat
- Blanking elements (cylinder head)
- Eye-bolt for transporting (cylinder head)
- Eye-bolt for transporting (cylinder head)
- Transport eye-bolt (cylinder head)
- Transport eye-bolt (cylinder head)
- Transport eye-bolt (cylinder head)
- Replace the crankshaft O-ring (flywheel end)
- Disassembling and assembling the gearbox
- Assembly and disassembly of the camshaft
- Check the camshaft
- Checking and setting valve clearance (6 cylinder)
- Assembly and disassembly of the distribution valve
- Removing and refitting the valve timing system
- Disassembly and assembly of the control elements
- Disassembling and assembling the oil cooler
- Removing and fitting the lubricant oil radiator
- Removing and fitting the lubricant oil radiator
- Removing and fitting the lubricant oil radiator housing
- Disassembling and assembling the lubricant oil radiator (blanking elements)
- Removing and fitting the lubricant oil radiator housing (fastener elements)
- Blanking elements (lubricant oil cooler housing)
- Blanking elements (lubricant oil cooler housing)
- Coolant pipe (lubricant oil radiator housing – crankcase)
- Coolant pipe (Lubricant oil cooler – cylinder head)
- Disassembling and assembling the oil suction pipe
- Disassembly and assembly of the fuel control unit (fastening elements)
- Disassembly and completion of the fuel control unit
- Disassembling and completing assembly of the fuel control unit (2000 bar injection system)
- Disassembling and assembling the high pressure pump (fastener elements)
- Disassembling and assembling the injector (1600 bar injection system)
- Disassembling and assembling the injector (1600 bar injection system)
- Flexible hose connectors
- Connector plug (fuel delivery pump)
- Removing and refitting fuel lines (fuel delivery pump – pilot block)
- Disassembling and assembling the fuel line (fuel control block – high pressure pumps)
- Disassembling and assembling the rail (1600 bar injection system)
- Disassembling and assembling the rail (1600 bar injection system)
- Disassembling and assembling the rail (2000 bar injection system)
- Disassembling and assembling the pressure cut-off valve (rail)
- Disassembling and assembling the pressure cut-off valve (rail)
- Disassembly and assembly of the rail pressure sensor
- Disassembly and assembly of the rail pressure sensor
- Removing and refitting fuel lines (Rail, cylinder head, fuel control unit – fuel filter)
- Fuel pipes (Fuel pump, fuel filter, pilot lock)
- Fuel pipes (Rail, cylinder head, pilot lock- fuel filter)
- Vibration damper (installation position)
- Disassembling and assembling charge air pipe
- Disassembling and assembling charge air pipe
- Removing and fitting the coolant pump
- Disassembling and assembling coolant pipe (ribbed V-belt, level 1)
- Removing and fitting the coolant pump (fastening elements)
- Removing and refitting adapter (coolant pump – thermostat housing)
- Transmission components (coolant pump)
- V-belt pulley
- Assembling and disassembling the thermostat
- Assembling and disassembling the thermostat
- Disassembling and assembling the thermostat
- Check the thermostat (after removing)
- Check the thermostat (after removing)
- Removal and installation of the thermostat housing
- Removal and installation of the thermostat housing
- Removal and installation of the thermostat housing
- Disassembling and assembling the thermostat housing (fastener elements)
- Blanking elements (coolant pump – thermostat housing)
- Blanking elements (thermostat housing)
- Blanking elements (thermostat housing)
- Blanking elements (thermostat housing)
- Blanking elements (thermostat housing)
- Blanking elements (thermostat housing)
- Flexible hose fastening (Thermostat housing)
- Flexible hose connector (thermostat box)
- Connection (compensation line)
- Breather pipe (thermostat box – cooler)
- Pipes (AGR radiator cylinder head)
- Compensation line (thermostat box)
- Removing and fitting belt tensioner (ribbed V belt)
- Disassembly and refitting of the belt tensioner (ribbed V-belt, level 1)
- Disassembly and refitting of the belt tensioner (ribbed V-belt, level 1)
- Removal and assembly of the fan support
- Removal and assembly of the fan support
- Removal and assembly of the fan support
- Removal and assembly of the fan support
- Fastener elements (fan mount)
- Disassembling and assembling the exhaust manifold
- Disassembling and assembling the exhaust manifold
- Removal and installation of the exhaust pipe (auxiliaries)
- Disassembling and assembling the exhaust manifold
- Assembling and disassembling the console
- Disassembling and assembling the butterfly valve
- Disassembling and assembling the butterfly valves
- Disassembling and assembling the radiator
- Removing and fitting the exhaust gas recirculation (EGR) radiator
- Disassembling and assembling the regulator
- Disassembling and assembling the regulator
- Disassembling and assembling the Venturi pipe
- Disassembling and assembling the Venturi pipe
- Removing and fitting the pipes (cylinder head – radiator, radiator – cylinder head).
- Exhaust gas pipe (Venturi tubes – mixing tubes)
- Pipe (exhaust pipe – pressure transducer)
- Pipe (exhaust pipe – pressure transducer)
- Disassembling and assembling the turbocharger
- Disassembling and assembling the turbocharger
- Disassembling and assembling the turbocharger
- Disassembling and assembling the lubricating oil pipe (exhaust gas turbocharger)
- Disassembling and assembling the lubricating oil pipe (exhaust gas turbocharger)
- Removing and refitting the lubricant oil return pipe – (upper section) – (turbocharger)
- Removing and refitting the lubricant oil return pipe – (upper section) – (turbocharger)
- Disassembling and assembling the lubricating oil return pipe (turbocharger)
- Removing and refitting the lubricant oil return pipe – (lower section) – (turbocharger)
- Removing and refitting the lubricant oil return pipe – (lower section) – (turbocharger)
- Removing and refitting the lubricant oil return pipe – (lower section) – (turbocharger)
- Disassembling and assembling alternator (poly-V-belt, level 1)
- Disassembling and assembling alternator (poly-V-belt, level 1)
- Removing and fitting the V belt pulley/poly-V belt pulley (alternator)
- Disassembling and assembling the console (ribbed V-belt, level 1)
- Disassembling and assembling the console (ribbed V-belt, level 1)
- Disassembling and assembling the console (ribbed V-belt, level 1)
- Disassembling and assembling the console (ribbed V-belt, level 1)
- Fitting and removing the rotation device (PTOC)
- Fitting and removing the rotation device
- Disassembling and assembling the connector housing
- Cover (connector casing)
- Cover (connector casing)
- Cover (connector casing)
- Disassembling and assembling the heater
- Disassembling and assembling the heater
- Disassembling and assembling the heater
- Removing and fitting the charge air elbow pipe
- Disassembling and assembling the mixer pipe
- Disassembling and assembling the mixer pipe
- Disassembling and assembling the butterfly valve
- Disassembling and assembling the butterfly valve
- Disassembly and assembly of the flange
- Removing and refitting the diesel particulate filter
- Removing and fitting the diesel particulate filter (9.5 ” axial and radial system – removed)
- Disassembling and assembling the NOx sensor
- Pressure transducer (exhaust back-pressure).
- Fitting the SCR (Selective Catalytic Reduction) dosing unit
- Cleaning the SCR delivery pump (Selective Catalytic Reduction)
- Cleaning/Checking SCR (Selective Catalytic Reduction) metering unit
- Cleaning the SCR (Selective Catalytic Reduction) pipe (delivery pump – metering unit)
- Blanking elements (diesel oxidation catalytic converter/diesel particulate filter, SCR catalytic converter)
- Cover guard (Differential pressure transducer)
- Mount (Exhaust after-treatment system 9.5″)
- SCR (Selective Catalytic Reduction) urea solenoid valve
- SCR delivery pump (Selective Catalytic Reduction)
- Outlet module particulate filter
- Mixer pipe (threaded connection) SCR (Selective Catalytic Reduction)
- Mixer pipe (fastening element) SCR (Selective Catalytic Reduction)
- Blanking elements (crankcase, PTO-A)
- Closing elements (Power Take-Off PTO-B)
- Closing elements (Power Take-Off PTO-B)
- Blanking elements (gearbox, PTO-C)
- Blanking elements (gearbox, PTO-C)
C0 – Engine accessories
- Removing and fitting the fuel filter head
- Disassembling and assembling the fuel delivery pump (fastener elements)
- Fuel filter
- Manual fuel pump
- Filter holder
- Assembly of the pressure transducer (fuel pressure)
- Disassembly and refitting of the intake air pressure/temperature sender
- Blanking elements (mixer pipe, intake air)
- Shield plate (exhaust gas back-pressure sensor)
- Turbocharger shield plate
- Support plate (exhaust gas back-pressure relay – sensor)
- Support (shield plate)
- Pressure transducer (exhaust back-pressure).
- Pressure transducer (exhaust back-pressure).
- Connector manifold (intake air)
- Connector manifold (intake air)
- Intake manifold (exhaust gas turbocharger)
- Removing and fitting the fan mount (fastener elements)
- Removing and fitting the fan mount (fastener elements)
- Removing and fitting the temperature sender
- Removing and fitting the pressure transducer
- Mount (radiator – exhaust gas recirculation)
- Mount (radiator – exhaust gas recirculation)
- Pressure transducer/Duct (exhaust gas back-pressure).
- Pressure transducer/Duct (exhaust gas back-pressure).
- Disassembling and assembling the pressure transducer (exhaust back-pressure)
- Connection (Starter)
- Connection (Starter)
- Shield plate (starter)
- Alternator
- Starter (fasteners)
- Mount (Assembly foot, side opposite of the flywheel)
- Mount (assembly foot, side opposite of the flywheel)
- Mount (assembly foot, flywheel side)
- Disassembling and assembling the crankshaft speed sensor (fastener elements)
- Disassembling and assembling the crankshaft speed sensor (fasteners)
- Disassembling and assembling the crankshaft speed sensor (fasteners)
- Disassembling and assembling the camshaft speed sensor (ancillaries)
- Disassembly and refitting of the intake air pressure/temperature sender
- Fastener elements (wiring bundle)
- Fastener elements (wiring bundle)
- Fastener elements (wiring bundle)
- Support plate (on the charge air pipe)
- Support (wiring harness)
- Temperature sender (coolant)
- Fitting the pressure transducer (fuel pressure / lubricant oil pressure)
- Relay (heater, thermo-starter, glow plugs)
- Connector cable (relay – alternator)
- Connector cable (relay – heater)
- Protective cap (relay)
- Heater (connector line)
- Check the seal of the cooling system
- Differential pressure sender (diesel particulate filter)
- Differential pressure sender (diesel particulate filter)
- Temperature sender (upstream of the SCR catalytic converter)
- Temperature sender (ahead of and after diesel oxidation catalytic converter)
- Temperature sender (exhaust gas)
- Temperature sender (inlet air and ambient air temperature)
- V-Band clamp.
- VBand clamp (4″ exhaust pipe)
- VBand clamp (turbocharger)
- Mount (exhaust gas back-pressure sensor)
- AdBlue Connection Backflow – Inlet pipes
- Engine coolant replacement
- Starter motor
- Exhaust silencer
- DOC (diesel oxidation catalyst) catalytic converter
- Disassembling the DOC (diesel oxidation catalyst) catalytic converter
- Complete radiator pack
- Intercooler, gearbox oil and fuel heat exchangers
- Coolant fluid radiator
- AdBlue tank
- AdBlue pump module
- Compensation tank
- Air filter container
- Air intake duct
- Main tank
- Auxiliary tank
- Air compressor
- Fuel filter
- Duct
- Fan
D0 – Transmission
- Separation of Rear Axle from Transmission
- Removal of cartridge
- Disassembly of shifting drum
- Disassembly of P1 ring gear carrier
- Disassembly of P1/P2 Planetary drive
- Disassembly of P5/P6 Planetary drive
- Disassembly of KV clutch
- Disassembly of K1 clutch
- Disassembly of K3/K4 clutch and P3/P4 planetary drive
- Disassembly of K3/K4 clutch
- Disassembly of P3/P4 planetary drive
- Disassembly of KR clutch
- Disassembly of K2 Clutch
- Disassembly of Hydrostatic Unit
- Disassembly of control (TCU)
- Disassembly of pump
- Disassembly of suction filter
- Disassembly of Valve Block
- Disassembly of Valve Block
- Disassembly of Valve Block (P.R.V. – Pressure Relief Valve)
- Disassembly of W.H. and E.C.U.
- Disassembly of inductive sensors
- Disassembly of plug-in module
- Disassembly of output shaft
- Disassembly of intermediate housing
- Disassembly of drive shaft
- Reassembly of Transmission Housing
- Reassembly of drive shaft
- Reassembly of intermediate housing
- Reassembly of Plug-In Module
- Reassembly of output shaft
- Preassembly of Housing Lid
- Reassembly of Inductive Sensors
- Reassembly of W.H. and E.C.U.
- Reassembly of Valve Block (P.R.V. – Pressure Relief Valve)
- Reassembly of Valve Block
- Reassembly of Valve Block
- Reassembly of pump
- Reassembly of Control
- Reassembly of Hydrostatic Unit
- Reassembly of suction filter
- Reassembly of K2 Clutch
- Reassembly of KR clutch
- Reassembly of P3/P4 planetary drive
- Reassembly of K3/K4 Clutch
- Reassembly of K1 Clutch
- Reassembly of KV Clutch
- Reassembly of P5/P6 planetary drive
- Reassembly of P1/P2 planetary drive
- Reassembly of P1 Ring gear carrier
- Reinstallation of cartridge
- Fitting of rear axle to the transmission
- Pipes and closing components
- Torsionally flexible coupling and flywheel
- Gearbox hydrostatic pump
- Changing the transmission oil
- PTO speed sensor
E0 – Rear axle
- Removing the axle housing
- Removing brakes
- Removing the differential
- Removing the PTO
- Removing the oil feed
- Fitting lifter, oil feed and blanking elements
- Fitting the oil feed
- Fitting blanking elements
- Fitting the PTO
- Fitting the differential
- Fitting brakes
- Fitting the axle housing
- Procedure to check EPB stroke
F0 – Front axle
- Safety precautions
- Mandatory procedure for draining oil
- 4WD shaft
- Front axle
- Front axle carrier
- Pivot brackets
- Planetary reduction gearbox
- Steering cylinders
- Differential assembly
- Bevel pinion
- Engine speed sensor
- Stub axle and steering sensor
- Carrier with rear axle
G0 – Bodywork – Cab – Platform
- Empty and charge the air conditioning system
- Air conditioning compressor
- Condenser
- Front mudguards
- Main tank mount
- Battery mount
- Right hand cab access steps
- Left hand cab access steps
- Master cylinder
- Cab
- Engine hood and front hood panels
- Left side panel bracket
- Mat
- Under-seat mat
- Driver seat
- Passenger seat
- Left hand rear pillar cover
- Right hand rear pillar cover
- A/C unit
- Steering wheel
- Instrument cluster
- Right hand control console
- Left hand console
- Active carbon filter
- Electric Park Brake
- Replacing the evaporator
- A.C. Electronic Control Unit replacement
- Brake pressure sensor
- Brake pump pressure sensor
H0 – Hydraulic system
- Power steering
- Oil heat exchanger
- Front axle suspension solenoid valve block.
- Rear distributor assembly
- L.S. pump
- Air tanks
- Hydraulic braking
- Purge air from hydraulic brake system
- Brake system accumulator
- Air braking valve
- Steering system pressure sensor
L0 – Electrical system
- Instrument cluster
- Engine control unit
N0 – Front lift
- Front lift
- Front lift position sensor
R0 – Rear lift
- Removing the lifter
- Fitting the lifter
- Rear lift position sensor
- 3-point linkage
S0 – Wheels
- Front Wheels
- Rear wheels
V0 – Ballast – towing hitches
- Tow hook sled
- Tow hook
V1 – AFTERMARKET KITS
- Installation of the cab pillar filter frames kit (p.n. 9.AB386.91.0)
- Installation of the connector’s cover kit
Wiring diagrams
Introduction
- Introduction
- Basic electronics for mechanics (1/2)
- Basic electronics for mechanics (2/2)
- Electrical and electronic components (1/2)
- Electrical and electronic components (2/2)
Components
- HLHP Control unit (Service Controller Cab)
- Gear box Control unit
- ECU ISO 11786 Control unit
- Service TECU Control unit
- HLHP Control unit (Service Controller Body)
- Engine Control unit
- Remote control unit
- LED worklights control unit
- A – Starting and charging
- B – Fuses
- C – Grounds
- D – Intermediate connections
- E – On-board instruments and visual and audible indicators
- F – External lights (rotating beacon)
- G – Interior lights
- H – Manual electrical controls (steering column stalk)
- I – Circuit breakers
- J – Relays
- K – Sensors and transmitters
- L – Electromagnets and solenoid valves
- M – Electrical/electronic devices, Flasher units and Timers
- N – Electric motors and actuators
- O – Resistors and rheostats
- P – Various services
- R – Diagnostics
Systems
- S001 – Power
- S002 – Starter
- S003 – Engine cooling
- S004 – Engine control system
- S005 – Emissions control system
- S006 – Front lights
- S007 – Rear work lights
- S008 – Roof lights
- S009 – Front work lights
- S010 – Sidelights and turn indicators
- S011 – Internal illumination
- S012 – Defrost and wiper
- S013 – Horn
- S014 – Mirror adjustment
- S015 – Radio
- S016 – Power socket – accessories
- S017 – Air conditioning
- S018 – Front lift
- S019 – Rear lift
- S020 – Rear mudguards
- S021 – Braking system
- S022 – Trailer brake
- S023 – Transmission
- S024 – Isobus line
- S025 – “AUX” CAN line
- S026 – “VEHICLE” CAN line
- S027 – “BODY” CAN Line
- S028 – Agrosky
- S029 – i-Monitor
- S030 – Front axle
- S031 – Front loader
- S032 – Prewiring for solenoid valve module
- S033 – PTO
Wiring harnesses
- 0.012.2018.4/20 – License plate lights
- 0.012.4030.4 – Front PTO
- 0.016.8489.4 – Engine brake
- 0.017.0496.4/10 – H9 lower front work lights
- 0.017.0497.4/20 – H9 lower rear work lights
- 0.017.8425.4 – Trailer socket, EU
- 0.017.8426.4 – Trailer socket, USA
- 0.018.9990.4/10 – Electrical system for distributors
- 0.019.2379.4/20 – Work lights, sidelights, turn indicator and front lights
- 0.019.2380.4/40 – Turn indicator lights
- 0.019.2474.4/10 – Differential lock solenoid valve (PTO)
- 0.019.2539.4/10 – Hydraulic trailer braking
- 0.021.2571.4 – ISO 11786
- 0.019.3659.4 – Monitor (Armrest)
- 0.019.4559.4/10 – Rear work light on mudguard
- 0.019.4689.4/20 – Work lights for H9 roof
- 0.019.4914.4/20 – Work lights for cab roof (LED)
- 0.019.5311.4/10 – Automatic A/C system
- 0.019.9825.4/10 – Agrosky SRC40 antenna
- 0.019.9829.4/20 – Agrosky SR10 antenna
- 0.020.1009.4 – Front sidelights and work lights
- 0.020.1026.4/10 – Front turn indicators and lower front work lights
- 0.020.8862.4/10 – Roof panel electrical system
- 0.021.0490.4 – ABS socket for trailer
- 0.021.1028.4/10 – Agrosky Adapter
- 0.021.3880.4/20 – Rear ISOBUS electrical system
- 0.021.3932.4/10 – ISOBUS electrical system
- 0.021.5509.4 – Rear screen defrost
- 0.021.8291.4 – Front LED work lights
- 0.021.8334.4 – Rear LED work lights
- 0.023.0526.4 – TECU wiring loom
- 0.023.9006.4/10 – Lower fuse box
- 0.023.9007.4 – Front electrical system
- 0.023.9008.4/10 – Cowl electrical system
- 0.023.9201.4/10 – Battery wiring
- 0.023.9202.4/10 – Front axle steering sensor (Dana)
- 0.023.9204.4 – Agrosky
- 0.023.9205.4 – Electrohydraulic controls
- 0.023.9206.4 – Remote command control unit
- 0.023.9207.4 – Light adapter on front arm
- 0.023.9243.4/10 – Front ISOBUS socket
- 0.023.9246.4 – TECU wiring loom
- 0.023.9247.4 – Front loader
- 0.023.9249.4 – Front loader module
- 0.023.9250.4 – Rear mudguards
- 0.023.9582.4/10 – LED work lights for cab roof
- 0.023.9583.4/10 – H9 work lights for cab roof
- 0.023.9654.4/10 – Engine
- 0.023.9655.4 – Cab
- 0.023.9657.4 – Gearbox
- 0.023.9658.4 – Rear wiring loom
- 0.024.0765.4 – Rear screen defrost adapter
- 0.024.0881.4 – Seat heating
- 0.024.3197.4/10 – Front axle
- 04436707/10 – Flashing beacon
- 04437517 – Outline marker lights
Service Info
A0 – TRACTOR
- Diagnostics 2026 subscription
- After-sales 2026 subscription
- SERVICE NEWS RESEARCH GUIDE
- Diagnostics 2025 subscription
- After-sales 2025 subscription
- Diagnostics 2023 subscription
- Diagnostics 2024 subscription
- Diagnostics 2022 subscription
- Diagnostics 2021 subscription
- After-sales 2024 subscription
- After-sales 2023 subscription
- After-sales 2022 subscription
- After-sales 2021 subscription
- After-sales 2019 subscription
- Diagnostics – 2020 subscription
- After-sales – 2020 subscription
B0 – ENGINE
- Deutz AG engine oil specifications
C0 – ENGINE ACCESSORIES
- Diagnostic protocol – AdBlue – Float level unit
- Filter and prefilter tool p/n 5.9035.865.0
- Improved charge air cooler hose
- AdBlue Float level unit
- SCR AREA DAMAGED SENSORS
- Coolant tank leakage
F0 – FRONT AXLE
- Bevel gear set loosing screws
- Check the front axle steering knuckles for wear
- Wheel angle sensor malfunction of DANA front axle
- Steering behavior check procedure
G0 – BODYWORK – CAB
- Brake booster pump internal damage
- Air conditioning system recharging
H0 – HYDRAULIC AND PNEUMATIC SYSTEM|
- SERVICE NEWS – HPT – Front axle suspension – Damaged 2.8l accumulator
- Hydraulic CUNA trailer braking kit (ITALY)
- Single connection hydraulic braking kit availability update – only for EUROPEAN market
- Dry front brake discs – damaged brake pipes
- Front axle suspension group improvements
- PVED-CLS replacement
- L0 – ELECTRIC AL SYSTEM
