Document overview
Workshop Manual for LAMBORGHINI Mach 210 T4i VRT → WSXW850200LL50010 from the MACH T4i VRT (STAGE 3B) family. Digital PDF in English with 2,704 pages.
The corresponding English table of contents contains 57 sections and 825 individual topics.
Main sections included
- Introduction
- Safety
- Technical characteristics
- Calibrations and electronic diagnosis
- Method of intervention
- Wiring diagrams
- Service Info
Document details
- Brand: LAMBORGHINI
- Family: MACH T4i VRT (STAGE 3B)
- Model: Mach 210 T4i VRT
- Starting serial number: WSXW850200LL50010
- Document type: Workshop Manual
- Language: English
- Pages: 2,704
- File size: 405.58 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that your machine model and reference code match LAMBORGHINI Mach 210 T4i VRT → WSXW850200LL50010.
Complete table of contents
Introduction
- Introduction – Engines
- Tightening Torques
- Tightening torques for nuts and bolts of electrical connections
- Wheel rim to hub screws and nuts tightening torques
- Units of measurement and conversion factors
Safety
Preface
- Important notes concerning safety
Important safety information
- Recognising hazards
- Indications for persons in contact with the tractor
Safety rules
- Risks during tractor preparation
- Risks during maintenance
- Work on machine systems
- Special disassembly/assembly/inspection procedures
Safety pictograms
- Replacing safety pictograms
Environmental risks
- Hazards associated with the operating environment
Technical characteristics
Engine
- Motor description – construction type
- Engine description – Images of engine
- Engine description – Lubricant oil diagram
- Engine description – Fuel circuit diagram
- Engine description – Coolant diagram
- Engine description – Exhaust gas recovery
- Engine description – Exhaust gas after-treatment
- Engine description – Electrical/electronic system
- Use – Environmental conditions
- Use – First start-up
- Usage – Starting procedure
- Usage – Controlling engine operation
- Use – exhaust gas after-treatment systems
- Usage – Active regeneration
- Usage – Passive regeneration
- Use – Stop procedure
- Operating materials – lubricant oil
- Operating materials – Fuel
- Operating materials – Coolant
- Fluids – SCR reduction agent
- Maintenance – Maintenance schedule
- Care and maintenance work – Lubricant oil system
- Care and maintenance work – Fuel distribution system
- Care and maintenance – SCR
- Care and maintenance work – Cooling system
- Care and maintenance work – Engine cleaning
- Care and maintenance work – Intake system
- Care and maintenance work – Belt transmissions
- Care and maintenance – Adjustments and settings
- Care and maintenance work – Electrical system
- Malfunctions – Malfunction table
- Faults – Engine management
- Transport and storage – Transport
- Transport and storage – Transport and storage
- Technical data – Engine data and adjustment data
- Technical data – Tools
Engine accessories
- Pressure transducer (L3)
- Pressure sensor (L3)
- Temperature sender (L3)
- Temperature sender (L3)
- Temperature sender (L3)
- Temperature sender (L3)
- Speed indicator (L3)
- NOx sensor (L3)
- NOx sensor (L3)
- Temperature sender (L3)
- Temperature sender (exhaust gas) (L3)
Transmission
- Transmission
Front axle
- Front axle – Version with disc brakes
Bodywork – Cab – Platform
- Air conditioning system
- Supplementary heating – Webasto – General description
- Supplementary heating – Webasto – Description of operation
- Supplementary heating – Webasto – Faults
- Supplementary heating – Webasto – Technical specifications
- Supplementary heater – Webasto – Wiring diagrams
Hydraulic system
- Hydraulic System
- 45 cc variable displacement pump
- 63 cc variable displacement pump
- Hydraulic pump
- Load sensing valve, pressure cut-off valve
- Priority valve
- Power steering
- Hydraulic front axle suspension
- Servo-brake valve for front axle
- Hydraulic trailer braking system – Italy version
- Hydraulic trailer braking system – Export version
- Steering gear pump – Version without compressor
- Steering gear pump – Version with compressor
- Braking system
- Master cylinder
- Remote control valve – 8-way version
- Ancillary utility distributor – 10-way version
- Remote control valve – 12-way version
- Remote control valve – 14-way version
- Air trailer braking system – Italy version
- Air trailer braking system – DE Export version
- Air trailer braking system – CH Export version
- Compressor
- Pressure cut-off valve
- Quick pressure release valve
- Pressure limiting valve
- Trailer air braking valve (2-way)
- Pneumatic trailer braking valve with unbraked front axle (2-way)
- Trailer air braking valve (1-way)
- Trailer air brake boost solenoid valve
- Trailer parking brake control solenoid valve
Front PTO
- Front PTO
Calibrations and electronic diagnosis
- ECU interrogation
- Diagnostic sockets and connections
Diagnostic tools
SDF Analyser
- SDF Analyser
Serdia 2010
- Safety-Hints
- Common Hints
- Common Hints – Start and Communication
- Common Hints – Disposability
- Introduction
- Error Hints (FAQ)
- Connection establishment
- Software handling
- Software handling – Topper elements
- Global Programfunctionality – Dataset management
- Global Programfunctionality – Error memory
- Global Programfunctionality – Graphical display
- Global Programfunctionality – Program adjustments
- UseCases EMR4
- Engine settings
- Adjustments engine speed – acceleration pedal
- CRT – TIER4 interim
- DPF – Burner – TIER4 interim
- SCR – TIER4 interim
- SCR service routines
- DPF service routines
- Service Routines DPF (DOC/SCR)
- Service-Cases
- Other
- UseCases EMR3
- UseCases EMR2
- Programm options
Commissioning and calibrating the tractor
- Putting in service – Introduction (Software HLHP versione SC134AG)
- Putting in service – Basic procedure for startup
- Putting in service – End of line settings
- Putting in service – Transmission
- Putting in service – PTO
- Putting in service – ASM
- Putting in service – Rear lift
- Putting in service – Suspension
- Putting in service – System
- Putting in service – Distributors
- Putting in service – Engine
- Putting in service – Air conditioner
- Putting in service – Park brake
- Putting in service – Agrosky
- Putting in service – MR-D Cabin
- Putting in service – Delete alarms
ECU alarms
Engine alarms
- Engine ECU Alarms: SPN 000016-000175
- Engine ECU Alarms: SPN 000190-001188
- Engine ECU Alarms: SPN 001231-003520
- Engine ECU Alarms: SPN 003532-005763
- Engine ECU Alarms: SPN 520521-523632
- Engine ECU Alarms: SPN 523633-523918
- Engine ECU Alarms: SPN 523919-524030
- Engine ECU Alarms: SPN 524031-524108
- Engine ECU Alarms: SPN 524109-524267
Transmission alarms
- Transmission alarms “FMGR” ECU
- Transmission alarms “SGR” ECU
- SGR ECU – Error 01
- SGR ECU – Error 02
- SGR ECU – Error 03
- SGR ECU – Error 05
- SGR ECU – Error 07
- SGR ECU – Error 08
- SGR ECU – Error 09
- SGR ECU – Error 0A
- SGR ECU – Error 0B
- SGR ECU – Error 0C
- SGR ECU – Error 0D
- SGR ECU – Error 0E
- SGR ECU – Error 0F
- SGR ECU – Error 10
- SGR ECU – Error 11
- SGR ECU – Error 12
- SGR ECU – Error 13
- SGR ECU – Error 14
- SGR ECU – Error 15
- SGR ECU – Error 16
- SGR ECU – Error 17
- SGR ECU – Error 18
- SGR ECU – Error 19
- SGR ECU – Error 1A
- SGR ECU – Error 1B
- SGR ECU – Error 1C
- SGR ECU – Error 1D
- SGR ECU – Error 1E
- SGR ECU – Error 1F
- SGR ECU – Error 20
- SGR ECU – Error 21
- SGR ECU – Error 22
- SGR ECU – Error 23
- SGR ECU – Error 24
- SGR ECU – Error 25
- SGR ECU – Error 26
- SGR ECU – Error 27
- SGR ECU – Error 28
- SGR ECU – Error 29
- SGR ECU – Error 2A
- SGR ECU – Error 2B
- SGR ECU – Error 2C
- SGR ECU – Error 2D
- SGR ECU – Error 2E
- SGR ECU – Error 2F
- SGR ECU – Error 30
- SGR ECU – Error 31
- SGR ECU – Error 32
- SGR ECU – Error 33
- SGR ECU – Error 34
- SGR ECU – Error 35
- SGR ECU – Error 36
- SGR ECU – Error 38
- SGR ECU – Error 39
- SGR ECU – Error 3C
- SGR ECU – Error 3D
- SGR ECU – Error 3F
- SGR ECU – Error 40
- SGR ECU – Error 41
- SGR ECU – Error 42
- SGR ECU – Error 43
- SGR ECU – Error 44
- SGR ECU – Error 45
- SGR ECU – Error 46
- SGR ECU – Error 47
- SGR ECU – Error 48
- SGR ECU – Error 49
- SGR ECU – Error 4A
- SGR ECU – Error 4B
- SGR ECU – Error 4C
- SGR ECU – Error 4D
- SGR ECU – Error 4E
- SGR ECU – Error 4F
- SGR ECU – Error 50
- SGR ECU – Error 51
- SGR ECU – Error 52
- SGR ECU – Error 53
- SGR ECU – Error 54
- SGR ECU – Error 55
- SGR ECU – Error 56
- SGR ECU – Error 57
- SGR ECU – Error 58
- SGR ECU – Error 59
- SGR ECU – Error 5A
- SGR ECU – Error 5C
- SGR ECU – Error 5D
- SGR ECU – Error 5E
- SGR ECU – Error 5F
- SGR ECU – Error 60
- SGR ECU – Error 61
- SGR ECU – Error 62
- SGR ECU – Error 63
- SGR ECU – Error 68
- SGR ECU – Error 69
- SGR ECU – Error 6A
- SGR ECU – Error 6B
- SGR ECU – Error 6C
- SGR ECU – Error 70
- SGR ECU – Error 71
- SGR ECU – Error 72
- SGR ECU – Error 73
- SGR ECU – Error 74
- SGR ECU – Error 75
- SGR ECU – Error 76
- SGR ECU – Error 78
- SGR ECU – Error 79
- SGR ECU – Error 7A
- SGR ECU – Error 7B
- SGR ECU – Error 7C
- SGR ECU – Error 7D
- SGR ECU – Error 7E
- SGR ECU – Error 7F
- SGR ECU – Error 82
- SGR ECU – Error 83
- SGR ECU – Error 84
- SGR ECU – Error 85
- SGR ECU – Error 86
- SGR ECU – Error 87
- SGR ECU – Error 88
- SGR ECU – Error 90
- SGR ECU – Error 91
- SGR ECU – Error 92
- SGR ECU – Error 93
- SGR ECU – Error 94
- SGR ECU – Error 95
- SGR ECU – Error 96
- SGR ECU – Error 97
- SGR ECU – Error 98
- SGR ECU – Error 99
- SGR ECU – Error 9A
- SGR ECU – Error 9B
- SGR ECU – Error 9C
- SGR ECU – Error 9D
- SGR ECU – Error A0
- SGR ECU – Error A1
- SGR ECU – Error AA
- SGR ECU – Error AB
- SGR ECU – Error B0
- SGR ECU – Error B1
- SGR ECU – Error B2
- SGR ECU – Error B3
- SGR ECU – Error B8
- SGR ECU – Error B9
- SGR ECU – Error BA
- SGR ECU – Error BB
- SGR ECU – Error BC
- SGR ECU – Error BD
- SGR ECU – Error BE
- SGR ECU – Error C0
- SGR ECU – Error C1
- SGR ECU – Error C2
- SGR ECU – Error C3
- SGR ECU – Error C4
- SGR ECU – Error C5
- SGR ECU – Error C6
- SGR ECU – Error C8
- SGR ECU – Error C9
- SGR ECU – Error CA
- SGR ECU – Error CB
- SGR ECU – Error CC
- SGR ECU – Error CD
- SGR ECU – Error CE
- SGR ECU – Error D0
- SGR ECU – Error D1
- SGR ECU – Error D2
- SGR ECU – Error D3
- SGR ECU – Error D4
- SGR ECU – Error D5
- SGR ECU – Error D6
- SGR ECU – Error D8
- SGR ECU – Error D9
- SGR ECU – Error DA
- SGR ECU – Error DB
- SGR ECU – Error DC
- SGR ECU – Error DD
- SGR ECU – Error DE
- SGR ECU – Error E0
- SGR ECU – Error E1
- SGR ECU – Error E2
- SGR ECU – Error E3
- SGR ECU – Error E4
- SGR ECU – Error E5
- SGR ECU – Error E6
- SGR ECU – Error E8
- SGR ECU – Error E8 (SDF S240 / SDF S180+)
- SGR ECU – Error EA
- SGR ECU – Error EA (SDF S240 / SDF S180+)
- SGR ECU – Error EB
- SGR ECU – Error EB (SDF S240 / SDF S180+)
- SGR ECU – Error EC
- SGR ECU – Error ED
- SGR ECU – Error F0
- SGR ECU – Error F2
- SGR ECU – Error F3
- TCU pin assignment
Armrest alarms
- PLA_2 Armrest Alarms List
HLHP alarms
- SECU – Service Control Unit (1/10)
AC system alarms
- Manual Air Conditioner Alarms
- Automatic Climate control unit alarms list
EPB Alarms
- EPB alarms list
Electronic battery master switch alarms
- Alarm List, Electronic Battery Master Switch
Electrohydraulic control valve alarms
- Distributor alarms
Software management
- Engine dataset upgrade
- Universal firmware update for ECUs installed on pre-T4F SDF vehicles
- iMonitor 8” – Software update
Method of intervention
- Index Repair instructions
- Installation of solenoid valves and cartridge valves
- Replacing the evaporator
B0 – Engine
- Removal and refitting of the crankcase breather
- Removal and refitting of the crankcase breather
- Renewal of the crankshaft oil seal
- Changing the crankshaft ring gasket (flywheel side)
- Installation and removal of the crankshaft sleeve
- Removal and refitting of the front cover (fixing elements)
- Removal and refitting of the oil sump pan
- Removal and refitting of the oil filler pipe
- Removal and refitting of the V-belt pulley
- Removal and refitting of the torsional vibration damper
- Removal and refitting of the flywheel (fixing elements)
- Compression test
- Removal and refitting of the cylinder head cover
- Check and adjust valve clearances
- Removal and refitting of oil cooler (auxiliary services)
- Removal and refitting of the lube oil cooler housing
- Removal and refitting of the pilot block
- Removal and refitting of the high-pressure pump, Installation position A
- Installation and removal of the high pressure pump, Assembly position B
- Removal and refitting the injectors
- Removal and refitting of the common rail
- Removal and refitting of the charge air duct
- Removal and refitting of the charge air manifold
- Removal and refitting of the air intake pipe
- Removal and refitting of the water pump
- Removing and installing the belt tensioner (Level 1).
- Removing and installing the support plate (Level 1)
- Removing and installing the support console (Level 1)
- Removal and installation of the exhaust pipe (auxiliaries)
- Removal and refitting of the exhaust gas turbocharger
- Removing and refitting the lubricating oil pipe (exhaust gas turbocharger)
- Removal and refitting of the lubricating oil return pipe (exhaust gas turbocharger)
- Removing and installing the belt tensioner (Level 2)
- Removing and installing the vee-groove pulley (#1)
- Removing and installing the vee-groove pulley (#2)
- Removing and installing the support console (Level 2)
- Removing and installing the console (Level 1)
- Removing and installing the support console (Level 2)
- Assembly and disassembly of the piston cooling nozzles (L3)
- Assembly and disassembly of the piston cooling nozzles (L3)
- Replacing the starter ring gear on the flywheel (L3)
- Replacing the starter ring gear on the flywheel (L3)
- Fitting and removing counterweight drive system, checking (L3)
- Assembly and disassembly of the crankshaft (L3)
- Crankshaft check (L3)
- Check the endfloat of the crankshaft (L3)
- Fitting and removing crankshaft bearings (L3)
- Check the crankshaft bearings (L3)
- Assembly and disassembly of the connecting rod drum (L3)
- Connecting rod drum check (L3)
- Replace the crankshaft O-ring (flywheel end) (L3)
- Disassembly and assembly of the gear box (L3)
- Disassembly and assembly of the gear box (L3)
- Disassembly and assembly of the gear box (L3)
- Assembly and disassembly of the camshaft (L3)
- Check the camshaft (L3)
- Assembly and disassembly of the distribution valve (L3)
- Removing and refitting the valve timing system (L3)
- Assembly and disassembly of the control elements (L3)
- Assembly and disassembly of the oil intake pipe (L3)
- Assembly and disassembly of the oil intake pipe (L3)
- Disassembly and completion of the pilot unit (L3)
- Disassembly and completion of the pilot unit (L3)
- A/C drive belt alignment and tension adjustment
- A/C compressor belt
- Water pump / alternator belt
- Separating engine / transmission
- Torsionally flexible coupling and engine flywheel
- Engine (1/2)
- Engine (2/2)
- Engine oil sump
- Replacing the tensioner pulley
C0 – Engine accessories
- Removing and fitting fuel lines (fuel delivery pump – fuel control block) (L3)
- Fitting and removing the temperature sender (exhaust gas) (L3)
- Removing and fitting NOx sensor (L3)
- Removal and installation of the fuel filter console
- Removal and installation of the fuel lift pump
- Removal and refitting of fuel lines (fuel lift pump – pilot block)
- Removal and refitting of fuel lines (pilot block – high pressure pump)
- Removal and refitting of fuel lines (pilot block – fuel lift pump)
- Removal and refitting of fuel lines (rail, cylinder head, pilot block – fuel filter)
- Removal and refitting of the heater
- Removal and refitting of the heater (details)
- Installing and removing the thermostat
- Thermostat check (with thermostat disassembled)
- Removal and installation of the thermostat housing
- Removal and refitting of the fan support
- Removal and assembly of the fan support
- Installing and removing the temperature transmitter (Exhaust gas)
- Removal and refitting of the starter motor
- Removal and refitting of the alternator (ribbed V-belt, level 2)
- Removal and refitting of the alternator (ribbed V-belt, level 1)
- Removal and refitting of the crankshaft speed sensor
- Removal and refitting of the camshaft speed sensor
- Installation and removal of the rotation device
- Installation and removal of the rotation device (torsional vibration damper)
- Removal and installation of the air conditioning compressor
- Replacing the coolant
- AdBlue tank
- AdBlue pump filter
- Draining the fuel tanks
- Diesel fuel tank
- Auxiliary tank
- Exhaust silencer
- Complete radiator pack
- Intercooler, oil exchangers
- Cooler
- Compensation tank
- Fan
- Air filter container
D0 – Transmission
- Separation of Rear Axle from Transmission
- Removal of cartridge
- Disassembly of shifting drum
- Disassembly of P1 ring gear carrier
- Disassembly of P1/P2 Planetary drive
- Disassembly of P3/P4 planetary drive
- Disassembly of P5/P6 Planetary drive
- Disassembly of KV clutch
- Disassembly of K1 clutch
- Disassembly of K2 clutch
- Disassembly of K3/K4 clutch and P3/P4 planetary drive
- Disassembly of K3/K4 clutch
- Disassembly of KR clutch
- Disassembly of hydrostatic unit
- Disassembly of control (TCU)
- Disassembly of pump
- Disassembly of suction filter
- Disassembly of filter head
- Disassembly of pressure relief valves
- Disassembly of control unit
- Disassembly of valves, pressure sensor, inductive sensors
- Disassembly of wiring harness, valve block and plate
- Disassembly of valve block (filter head, pressure relief valves, thermocouple)
- Disassembly of valve block (all-wheel-drive / park lock)
- Disassembly of Valve Block
- Disassembly of valve block (hydraulic control)
- Disassembly of valve block (pressure reducing valve)
- Disassembly of wiring harnesses and control unit
- Disassembly of wiring harnesses and control unit
- Disassembly of inductive sensors
- Disassembly of plug-in module
- Disassembly of clutch (all-wheel-drive)
- Disassembly of spur gear
- Disassembly of pinion
- Disassembly of park lock
- Disassembly of output shaft
- Disassembly of intermediate housing
- Disassembly of drive shaft
- Preassembly of transmission housing
- Reassembly of drive shaft
- Reassembly of intermediate housing
- Reassembly of pinion
- Reassembly of park lock
- Reassembly of clutch (all-wheel-drIve)
- Reassembly of spur gear
- Reinstallation of plug-in module
- Reassembly of output shaft
- Preassembly of housing lid
- Reassembly of plate
- Reassembly of valve block
- Reassembly of wiring harnesses
- Reassembly of inductive sensors, pressure sensors, valves
- Reassembly of control unit (hydrostatic unit)
- Reassembly of pressure relief valves (PRV)
- Reassembly of filter head
- Reassembly of wiring harnesses and control unit
- Reassembly of valve block (pressure reducing valve)
- Reassembly of valve block (hydraulic control)
- Reassembly of valve block (all wheel-drive / park lock)
- Reassembly of valve block (filter head, pressure relief valves, thermocouple)
- Reassembly of pump
- Reassembly of control
- Reassembly of hydrostatic unit
- Reassembly of suction filter
- Reassembly of K2 Clutch
- Reassembly of KR clutch
- Reassembly of P3/P4 planetary drive
- Reassembly of K3/K4 clutch
- Reassembly of K1 Clutch
- Reassembly of KV Clutch
- Reassembly of P5/P6 planetary drive
- Reassembly of P1/P2 planetary drive
- Reassembly of P1 Ring gear carrier
- Reinstallation of cartridge
- Changing the transmission oil
E0 – Rear axle
- Separating rear axle from transmission
- Axle Stub – Disassembly
- Brake Disassembly
- Differential – Disassembly
- PTO Transmission – Disassembly
- Oil Supply – Disassembly
- Lifting Unit – Disassembly
- Rear Axle Housing – Preassembly
- Lifting Unit – Assembly
- Oil Supply – Assembly
- Fitting the PTO transmission
- Fitting the differential
- Brake Assembly
- Axle Stub – Assembly
- Attaching rear axle to gearbox
- Procedure for checking EPB travel
F0 – Front axle
- Toe-in/steering angle/assembly tests
- Steering cylinders assembly
- Axle shaft assembly
- Flange assembly
- Differential assembly – carrier
- Checking the bevel gear pair
- Differential disassembly
- Axle pivot bearings assembly
- Bevel pinion assembly
- Planetary reduction gear assembly
- Wheel hub assembly
- Brake assembly
- 4WD shaft
- Front axle
- Front axle carrier
- Carrier with rear axle
G0 – Bodywork – Cab – Platform
- Handbrake adjustment
- Supplementary heater – Webasto – Troubleshooting
- Supplementary heating – Webasto – Functional tests
- Supplementary heating – Webasto – Maintenance
- Supplementary heater – Webasto – Disassembly and reassembly
- Empty and charge the air conditioning system
- Instruction for bleeding the brakes
- Air conditioning compressor
- A.C. Electronic Control Unit replacement
- Condenser
- Front mudguards
- Main tank mount
- Battery mount
- Left hand cab access steps
- Right hand cab access steps
- Brake master cylinders
- Cab
- Engine hood and front hood panels
- Hood frame
- Cab mat
- Seat
- Internal left side cab trim
- Right side inner cab trim
- A/C unit
- Steering wheel
- Instrument cluster
- Instrument cluster
- Headliner trim
- Electric Park Brake
- Air conditioning system diagnosis
H0 – Hydraulic system
- Replacing the exhaust gas temperature sensor
- Rear distributor assembly valve replacement
- Tightening the hydraulic power steering unit fastener screws
- Tightening torques for brake valve
- Power steering valve
- Front axle suspension solenoid valve assembly.
- Rear distributor assembly
- L.S. pump
- Air braking valve
- Air tanks
- Purge air from hydraulic brake system
L0 – Electrical system
- Fitting BDS cables
- Steering position sensor assembly
N0 – Front lift
- Front lift
R0 – Rear lift
- 939272 – Pulling force sensor (23/11/2010)
S0 – Wheels
- 939267 – Tyre fitting (23/11/2010)
- Front wheel
- Rear wheels
V0 – Ballast – towing hitches
- Tightening Torques for Tow Hitches
- Standard fastener hardware: Tightening torque/Tension forces
- Tow hook sled
V1 – AFTERMARKET KITS
- Replacing the supplementary oil delivery pipe (Power Beyond)
- Installing air conditioning kit in S2 cabs
Wiring diagrams
Introduction
- Introduction
- Basic electronics for mechanics (1/2)
- Basic electronics for mechanics (2/2)
- Electrical and electronic components (1/2)
- Electrical and electronic components (2/2)
Components
- 2.8519.134.0/50 – HLHP control unit
- 2.8519.133.0/40 – Transmission control unit
- Engine control unit
- Main power relay switch (TGC/RME-SA1)
- A – Starting and charging
- B – Fuses
- C – Grounds
- D – Intermediate connections
- E – On-board instruments and visual and audible indicators
- F – External lights
- G – Interior lights
- H – Electrical and manual controls
- I – Circuit breakers
- J – Relays
- K – Sensors and transmitters
- L – Electromagnets and solenoid valves
- M – Electrical/electronic devices, flasher units and timers
- N – Electric motors and actuators
- O – Resistors, rheostats, diodes and diode boards
- P – Various services
- R – Diagnostics
- T – Power supply points (+15 o +30)
Systems
- S001 – Electrical engine governor
- S002 – Starter
- S003 – Preheating
- S004 – AdBlue
- S005 – Transmission
- S005A – Transmission – Version with performance steering
- S006 – Front axle suspension
- S007 – Instrument cluster
- S008 – Lights – Version without front lift
- S009 – Lights – Version with front lift
- S010 – Turn indicators
- S011 – Work lights
- S012 – Semi-active cab suspension
- S013 – Manual air conditioner
- S014 – Automatic air conditioning
- S015 – +15 Positives
- S016 – +30 Positives
- S017 – CAN BUS Line – Standard version
- S017A – Standard CAN BUS line – Version with automatic air conditioning
- S017B – Visual guidance Can Bus line – Version without ISO11783
- S018 – CAN BUS Line – Version with ISO 11783
- S018A – ISO11783 Can Bus line – Version with visual guidance
- S018B – ISO11783 Can Bus line – Version with assisted steering
- S018C – ISO11783 Can Bus line – Version with performance steering
- S019 – CAN BUS line – Version without I-Monitor
- S020 – PTO
- S021 – Front and rear lifts
- S022 – Brakes
- S023 – Hydraulic trailer braking
- S024 – Hydraulic distributors
- S025 – Windscreen wipers
- S026 – Radio
- S027 – Accessories
- S028 – Diagnostics
- S029 – Monitor
- S030 – Agrosky – Version with visual guidance, without ISO11783
- S031 – ISO 11783
- S031A – ISO11783 Can Bus line – Version with visual guidance
- S031B – ISO11783 Can Bus line – Version with assisted steering
- S031C – ISO11783 Can Bus line – Version with performance steering
- S032 – Webasto
- S033 – Lights – Version without front lift (U.S.A.)
- S034 – Lights – Version with front lift (U.S.A.)
- S035 – Turn indicators (U.S.A.)
- S036 – Work lights (U.S.A.)
- S037 – +15 Positives (U.S.A.)
- S038 – +30 Positives (U.S.A.)
- S039 – PTO (U.S.A.)
- S040 – Braking (U.S.A.)
- S041 – ISO 11783 (U.S.A.)
Wiring harnesses
- 0.012.2018.4/20 – License plate light
- 0.014.0007.4/20 – Lights selector switch
- 0.014.5144.4/10 – Battery negative
- 0.015.3974.4/10 – Front axle suspension
- 0.015.4257.4/10 – PTO sensor (USA)
- 0.015.5429.4/20 – Front lift control
- 0.016.0642.4/20 – Rear LH lower work light on cab – Xenon version
- 0.016.0642.4/20 – Rear RH lower work light on cab – Xenon version
- 0.016.0650.4/10 – LH front supplementary work light on arm – Xenon version
- 0.016.0650.4/10 – RH front supplementary work light on arm – Xenon version
- 0.017.0496.4/10 – Supplementary LH front work light on arm
- 0.017.0496.4/10 – Supplementary RH front work light on arm
- 0.017.0497.4/20 – Rear RH lower work light on cab
- 0.017.0497.4/20 – Rear LH lower work light on cab
- 0.017.8425.4/10 – Rear trailer socket
- 0.017.8426.4 – Rear trailer socket (U.S.A.)
- 0.017.8887.4/10 – ISO 11783 – Front line
- 0.018.8803.4/10 – Battery positive terminal
- 0.018.9843.4/20 – ISO 11783 – Rear line
- 0.018.9845.4/10 – Fuses and relays
- 0.018.9990.4/10 – Distributors
- 0.018.9992.4/10 – AdBlue
- 0.019.2378.4/40 – LH mudguard
- 0.019.2378.4/40 – RH mudguard
- 0.019.2379.4/20 – Front LH lower work lights on cab
- 0.019.2379.4/20 – Front RH lower work lights on cab
- 0.019.2380.4/30 – Hazard warning lights switch (USA)
- 0.019.2383.4/20 – Engine cowl
- 0.019.2474.4/10 – Rear PTO
- 0.019.2539.4/10 – Hydraulic braking
- 0.019.2571.4/10 – ISO 11786
- 0.019.2617.4/70 – ISO 11783 – Cab line
- 0.019.3658.4/20 – Agrosky solenoid valve
- 0.019.3659.4/10 – On-board monitor – Armrest
- 0.019.4559.4/10 – Rear service work light
- 0.019.4688.4/10 – Front top work lights on cab
- 0.019.4689.4/20 – RH rear work lights on cab roof
- 0.019.4689.4/20 – LH rear work lights on cab roof
- 0.019.4711.4/10 – Semi-active cab
- 0.019.4913.4/10 – Front top work lights on cab – LED version
- 0.019.4914.4/20 – LH rear work lights on cab roof – LED version
- 0.019.4914.4/20 – RH rear work lights on cab roof – LED version
- 0.019.5311.4/10 – Automatic A/C system interface
- 0.019.6793.4 – Fuel heater
- 0.019.9825.4/10 – Agrosky antenna (Assisted Steering)
- 0.019.9826.4/30 – Agrosky – I-Monitor
- 0.019.9827.4/10 – Front work lights on cab roof – LED version with Agrosky
- 0.019.9828.4/10 – Front work lights on cab roof – Version with Agrosky
- 0.019.9829.4/20 – Agrosky antenna (Visual guidance)
- 0.020.1009.4 – Front LH lower work lights on cab (USA)
- 0.020.1009.4 – Front RH lower work lights on cab (USA)
- 0.020.1026.4/10 – LH front supplementary work light on arm (U.S.A.)
- 0.020.1026.4/10 – RH front supplementary work light on arm (U.S.A.)
- 0.020.5056.4 – Brake hydraulic system pressure sensor – 60 km/h
- 0.020.8658.4 – Side instrument panel
- 0.020.8664.4 – RH transmission
- 0.020.8854.4 – Windscreen washer pumps
- 0.020.8862.4 – Roof
- 0.021.0396.4/10 – LH transmission
- 0.021.0489.4 – Auxiliary heating – Webasto
- 0.021.0490.4 – Trailer socket with ABS brakes
- 0.021.5509.4 – Rear screen defrost
- 0.021.8291.4 – Front left work lights on arm – LED version
- 0.021.8291.4 – Front right work lights on arm – LED version
- 0.900.0816.0 – Front PTO
- 04217216 – Preheating relay power supply
- 04217217 – Preheating
- 04218107 – Engine
- 04436707 – Left hand rotating beacon
- 04436707 – RH rotating beacon
- 04502029 – Fuel injectors
- 0.020.5907.4/10 Antenna amplifier
Service Info
A0 – TRACTOR
- Diagnostics 2026 subscription
- After-sales 2026 subscription
- SERVICE NEWS RESEARCH GUIDE
- Diagnostics 2025 subscription
- After-sales 2025 subscription
- Diagnostics 2023 subscription
- Diagnostics 2024 subscription
- Diagnostics 2022 subscription
- Diagnostics 2021 subscription
- Importance of 1st service at 50 operating hours
- After-sales 2024 subscription
- After-sales 2023 subscription
- After-sales 2022 subscription
- After-sales 2021 subscription
- After-sales 2019 subscription
- SDF Parts and SDF Service DVV 04/2014, version 26
- Diagnostics – 2020 subscription
- After-sales – 2020 subscription
- After-sales – 2018 subscription
- Service and Spare Parts – 2017 Subscription
- SDF Parts and SDF Service DVDs 05/2014 version 25
- DiagnosiS EMR 4 – Serdia 2010
B0 – ENGINE
- Flushing the lubrication circuit
- Deutz AG engine oil specifications
- SerDia 2010 updating license file
C0 – ENGINE ACCESSORIES
- Diagnostic protocol – AdBlue – Float level unit
- AdBlue feed pump cleaning
- AdBlue system trouble shooting
- AdBlue crystallization
- Solid urea deposits in catalytic converter
- NOx sensor (Generation 2.0/2.5)
- Filter and prefilter tool p/n 5.9035.865.0
F0 – FRONT AXLE
- Check the front axle steering knuckles for wear
- Steering behavior check procedure
G0 – BODYWORK – CAB
- Air conditioning with error U90
- Proper use of the conditioning system
- Air conditioning system recharging
- COMMON Trouble shooting protocol for EPB failures
H0 – HYDRAULIC AND PNEUMATIC SYSTEM|
- Hydraulic CUNA trailer braking kit (ITALY)
- Single connection hydraulic braking kit availability update – only for EUROPEAN market
- L0 – ELECTRIC AL SYSTEM
