Document overview
Digital Workshop Manual documentation for model DEUTZ FAHR AGROTRON TTV 620 → WSXJ430400LD10001 from the Agrotron TTV (STAGE 3A) family. Language: English; 1,800 pages.
The corresponding English table of contents contains 55 sections and 687 individual topics.
Main sections included
- Introduction
- Safety
- Technical characteristics
- Calibrations and electronic diagnosis
- Method of intervention
- Wiring diagrams
- Service Info
Document details
- Brand: DEUTZ FAHR
- Family: Agrotron TTV (STAGE 3A)
- Model: AGROTRON TTV 620
- Starting serial number: WSXJ430400LD10001
- Document type: Workshop Manual
- Language: English
- Pages: 1,800
- File size: 184.79 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that your machine model and reference code match DEUTZ FAHR AGROTRON TTV 620 → WSXJ430400LD10001.
Complete table of contents
Introduction
- Tightening torques
- Units of measurement and conversion factors
Safety
Preface
- Important notes concerning safety
Important safety information
- Recognising hazards
- Indications for persons in contact with the tractor
Safety rules
- Risks during tractor preparation
- Risks during maintenance
- Work on machine systems
- Special disassembly/assembly/inspection procedures
Safety pictograms
- Replacing safety pictograms
Environmental risks
- Hazards associated with the operating environment
Technical characteristics
Engine
- Components of the TCD 2012 L04/L06 4V DCR engine
- Technical data of Engine TCD 2012 4V
- Tightening requirements TCD 2012 L04/L06 4V DCR (Lv.3) engine
- Tightening requirements TCD 2012 L04/L06 4V DCR (Lv.2) engine
Transmission
- Transmission
- Rear PTO
Rear axle
- Rear axle
Front axle
- Front axle
Hydraulic system
- Hydraulic system
- Variable displacement pump
- Load pump
- Operation of the variable displacement pump
- Steering gear pump
- Load sensing valve, pressure cut-off valve
- Power steering valve
- Hydraulic front axle suspension
- Remote control valve
- Braking system
- Hydraulic trailer braking system – Italy version
- Hydraulic trailer braking system – Export version
- Trailer air braking system – Italy version
- Trailer air braking system – Export version
- Compressor, Pressure reducing valve, Cab suspension valve
- Trailer air braking valve (1-way)
- Trailer air braking valve (2-way)
- PTO and differential lock control valve
- Pilot solenoid valve for 1-way trailer air braking valve
Calibrations and electronic diagnosis
Diagnostic tools
SDF Analyser
- SDF Analyser
- SDF Analyser – Diagnostic socket connection
Serdia 2000
- Serdia
- SERDIA 2000 level III” software
- SERDIA – Diagnostic socket connection
Diagnostic tool screens
- ECU interrogation
- Electronic system
- CAN BUS system
- Engine control unit – Deutz EMR3
- HLHP ECU
- Transmission ECU
- Instrument panel
Commissioning and calibrating the tractor
- Introduction to commissioning the tractor
- Renewal of the engine control unit – Introduction
- Renewal of the engine control unit – Reading and saving DATASET
- Renewal of the engine control unit – Programming the control unit with DATASET
- Renewal of the engine control unit – Calibration of the accelerator pedal
- Renewal of the engine control unit – Calibration of the hand throttle lever
- Renewal of the transmission control unit – Introduction
- Renewal of the transmission control unit – Transmission type configuration
- Renewal of the transmission control unit – Tyres type configuration
- Renewal of the transmission control unit – Configuration of the wheel circumference (using the ART)
- Renewal of the transmission control unit – Configuration of the wheel circumference (without using the ART)
- Renewal of the transmission control unit – Configuration of the maximum travel speed
- Renewal of the transmission control unit – Configure the system for presence of shuttle lever
- Renewal of the transmission control unit – Calibration of the clutch pedal
- Renewal of the transmission control unit – Calibration of the main clutch
- Renewal of the HLHP control unit – Introduction
- Renewal of the HLHP control unit – Initialization of the HLHP control unit
- Renewal of the HLHP control unit – Configuration of the tractor model
- Renewal of the HLHP control unit – Configure the system for presence of front PTO
- Renewal of the HLHP control unit – SBA / ASM system enable
- Renewal of the HLHP control unit – Calibration the steering angle sensor
- Renewal of the HLHP control unit – Configuration for presence of the RADAR
- Renewal of the HLHP control unit – Calibrating low and high positions of the lift
- Renewal of the HLHP control unit – Lift control potentiometers calibration
- Renewal of the HLHP control unit – Front axle suspension system enable
- Renewal of the HLHP control unit – Setting the instrument control panel display language
- Renewal of the HLHP control unit – Configuring the quantity of auxiliary services
- Renewal of the HLHP control unit – Rear control valves identification
- Renewal of the HLHP control unit – Configuration for presence of the front lift
- Renewal of the armrest control unit – Introduction
- Renewal of the armrest control unit – Calibration of control valves n°3 and n°4 joystick
- Cancellation of all alarms
ECU alarms
- List of control unit alarms
Engine alarms
- Engine ECU alarms – ART code SPN 29
- Engine ECU alarms – ART code SPN 91
- Engine ECU alarms – ART code SPN 94
- Engine ECU alarms – ART code SPN 97
- Engine ECU alarms – ART code SPN 100
- Engine ECU alarms – ART code SPN 102
- Engine ECU alarms – ART code SPN 105
- Engine ECU alarms – ART code SPN 108
- Engine ECU alarms – ART code SPN 110
- Engine ECU alarms – ART code SPN 157
- Engine ECU alarms – ART code SPN 158
- Engine ECU alarms – ART code SPN 168
- Engine ECU alarms – ART code SPN 190
- Engine ECU alarms – ART code SPN 563
- Engine ECU alarms – ART code SPN 630
- Engine ECU alarms – ART code SPN 639
- Engine ECU alarms – ART code SPN 651
- Engine ECU alarms – ART code SPN 652
- Engine ECU alarms – ART code SPN 653
- Engine ECU alarms – ART code SPN 654
- Engine ECU alarms – ART code SPN 655
- Engine ECU alarms – ART code SPN 656
- Engine ECU alarms – ART code SPN 676
- Engine ECU alarms – ART code SPN 677
- Engine ECU alarms – ART code SPN 729
- Engine ECU alarms – ART code SPN 898
- Engine ECU alarms – ART code SPN 1079
- Engine ECU alarms – ART code SPN 1080
- Engine ECU alarms – ART code SPN 1235
- Engine ECU alarms – ART code SPN 2634
- Engine ECU alarms – ART code SPN 2791
- Engine ECU alarms – ART code SPN 523240
- Engine ECU alarms – ART code SPN 523350
- Engine ECU alarms – ART code SPN 523351
- Engine ECU alarms – ART code SPN 523352
- Engine ECU alarms – ART code SPN 523353
- Engine ECU alarms – ART code SPN 523354
- Engine ECU alarms – ART code SPN 523355
- Engine ECU alarms – ART code SPN 523420
- Engine ECU alarms – ART code SPN 523470
- Engine ECU alarms – ART code SPN 523490
- Engine ECU alarms – ART code SPN 523550
- Engine ECU alarms – ART code SPN 523600
- Engine ECU alarms – ART code SPN 523601
- Engine ECU alarms – ART code SPN 523612
- Engine ECU alarms – ART code SPN 523613
- Engine ECU alarms – ART code SPN 523615
- Engine ECU alarms – ART code SPN 523617
Transmission alarms
- Transmission control unit alarms – ART code 17
- Transmission control unit alarms – ART code 18
- Transmission control unit alarms – ART code 1C
- Transmission control unit alarms – ART code 20
- Transmission control unit alarms – ART code 21
- Transmission control unit alarms – ART code 28
- Transmission control unit alarms – ART code 2C
- Transmission control unit alarms – ART code 30
- Transmission control unit alarms – ART code 31
- Transmission control unit alarms – ART code 32
- Transmission control unit alarms – ART code 33
- Transmission control unit alarms – ART code 34
- Transmission control unit alarms – ART code 38
- Transmission control unit alarms – ART code 39
- Transmission control unit alarms – ART code 3A
- Transmission control unit alarms – ART code 3B
- Transmission control unit alarms – ART code 3C
- Transmission control unit alarms – ART code 40
- Transmission control unit alarms – ART code 48
- Transmission control unit alarms – ART code 49
- Transmission control unit alarms – Code ART 4A
- Transmission control unit alarms – ART code 4B
- Transmission control unit alarms – ART code 4C
- Transmission control unit alarms – ART code 4D
- Transmission control unit alarms – ART code 4F
- Transmission control unit alarms – ART code 51
- Transmission control unit alarms – ART code 52
- Transmission control unit alarms – ART code 53
- Transmission control unit alarms – ART code 54
- Transmission control unit alarms – ART code 55
- Transmission control unit alarms – ART code 58
- Transmission control unit alarms – ART code 59
- Transmission control unit alarms – ART code 5A
- Transmission control unit alarms – ART code 5B
- Transmission control unit alarms – ART code 61
- Transmission control unit alarms – ART code 62
- Transmission control unit alarms – ART code 63
- Transmission control unit alarms – ART code 64
- Transmission control unit alarms – ART code 65
- Transmission control unit alarms – ART code 68
- Transmission control unit alarms – ART code 69
- Transmission control unit alarms – ART code 6A
- Transmission control unit alarms – ART code 6B
- Transmission control unit alarms – ART code 71
- Transmission control unit alarms – ART code 72
- Transmission control unit alarms – ART code 73
- Transmission control unit alarms – ART code 74
- Transmission control unit alarms – ART code 75
- Transmission control unit alarms – ART code 78
- Transmission control unit alarms – ART code 7A
- Transmission control unit alarms – ART code 7B
- Transmission control unit alarms – ART code 80
- Transmission control unit alarms – ART code 81
- Transmission control unit alarms – ART code 84
- Transmission control unit alarms – ART code 88
- Transmission control unit alarms – ART code 89
- Transmission control unit alarms – ART code 8A
- Transmission control unit alarms – ART code 8C
- Transmission control unit alarms – ART code 96
- Transmission control unit alarms – ART code 99
- Transmission control unit alarms – ART code 9A
- Transmission control unit alarms – ART code 9B
- Transmission control unit alarms – ART code 9C
- Transmission control unit alarms – ART code A0
- Transmission control unit alarms – ART code A1
- Transmission control unit alarms – ART code A2
- Transmission control unit alarms – ART code A7
- Transmission control unit alarms – ART code B0
- Transmission control unit alarms – ART code B1
- Transmission control unit alarms – ART code B4
- Transmission control unit alarms – ART code C2
- Transmission control unit alarms – ART code C4
- Transmission control unit alarms – ART code C6
- Transmission control unit alarms – ART code C8
- Transmission control unit alarms – ART code CA
- Transmission control unit alarms – ART code CC
- Transmission control unit alarms – ART code D0
- Transmission control unit alarms – ART code D2
- Transmission control unit alarms – ART code DA
- Transmission control unit alarms – ART code DC
- Transmission control unit alarms – ART code EF
- Transmission control unit alarms – ART code F2
- Transmission control unit alarms – ART code F5
Armrest alarms
- Armrest alarms – ART code HLHP SPN 634
- Armrest alarms – ART code HLHP SPN 635
- Armrest alarms – ART code HLHP SPN 636
- Armrest alarms – ART code HLHP SPN 637
- Armrest alarms – ART code HLHP SPN 638
- Armrest alarms – ART code HLHP SPN 639
- Armrest alarms – ART code HLHP SPN 640
- Armrest alarms – ART code HLHP SPN 641
- Armrest alarms – ART code HLHP SPN 642
- Armrest alarms – ART code HLHP SPN 644
- Armrest alarms – ART code HLHP SPN 645
- Armrest alarms – ART code HLHP SPN 646
- Armrest alarms – ART code HLHP SPN 647
- Armrest alarms – ART code HLHP SPN 648
- Armrest alarms – ART code HLHP SPN 649
- Armrest alarms – ART code HLHP SPN 650
- Armrest alarms – ART code HLHP SPN 651
- Armrest alarms – ART code HLHP SPN 652
- Armrest alarms – ART code HLHP SPN 657
- Armrest alarms – ART code HLHP SPN 696
HLHP alarms
- HLHP control unit alarms – ART code HLHP SPN 51
- HLHP control unit alarms – ART code HLHP SPN 63
- HLHP control unit alarms – ART code HLHP SPN 158
- HLHP control unit alarms – ART code HLHP SPN 540
- HLHP control unit alarms – ART code HLHP SPN 541
- HLHP control unit alarms – ART code HLHP SPN 550
- HLHP control unit alarms – ART code HLHP SPN 551
- HLHP control unit alarms – ART code HLHP SPN 552
- HLHP control unit alarms – ART code HLHP SPN 561
- HLHP control unit alarms – ART code HLHP SPN 562
- HLHP control unit alarms – ART code HLHP SPN 601
- HLHP control unit alarms – ART code HLHP SPN 602
- HLHP control unit alarms – ART code HLHP SPN 603
- HLHP control unit alarms – ART code HLHP SPN 620
- HLHP control unit alarms – ART code HLHP SPN 621
- HLHP control unit alarms – ART code HLHP SPN 622
- HLHP control unit alarms – ART code HLHP SPN 623
- HLHP control unit alarms – ART code HLHP SPN 624
- HLHP control unit alarms – ART code HLHP SPN 627
- HLHP control unit alarms – ART code HLHP SPN 628
- HLHP control unit alarms – ART code HLHP SPN 629
- HLHP control unit alarms – ART code HLHP SPN 631
- HLHP control unit alarms – ART code HLHP SPN 632
- HLHP control unit alarms – ART code HLHP SPN 633
- HLHP control unit alarms – ART code HLHP SPN 653
- HLHP control unit alarms – ART code HLHP SPN 654
- HLHP control unit alarms – ART code HLHP SPN 655
- HLHP control unit alarms – ART code HLHP SPN 656
- HLHP control unit alarms – ART code HLHP SPN 657
- HLHP control unit alarms – ART code HLHP SPN 659
- HLHP control unit alarms – ART code HLHP SPN 661
- HLHP control unit alarms – ART code HLHP SPN 662
- HLHP control unit alarms – ART code HLHP SPN 664
- HLHP control unit alarms – ART code HLHP SPN 689
- HLHP control unit alarms – ART code HLHP SPN 694
- HLHP control unit alarms – ART code HLHP SPN 695
- HLHP control unit alarms – ART code HLHP SPN 700
- HLHP control unit alarms – ART code HLHP SPN 701
Canbus alarms
- CANBUS alarms – introduction
- CANBUS alarms – alarms table
- CANBUS alarms – Case 1
- CANBUS alarms – Case 2
- CANBUS alarms – Case 3
- CANBUS alarms – Case 4
- CANBUS alarms – Case 5
- CANBUS alarms – Case 6
- CANBUS alarms – Case 7
- CANBUS alarms – Case 8
- CANBUS alarms – Case 9
Electrohydraulic control valve alarms
- CANBUS Control valves control unit alarms – ART code HLHP 11
- CANBUS Control valves control unit alarms – ART code HLHP 12
- CANBUS Control valves control unit alarms – ART code HLHP 13
- CANBUS Control valves control unit alarms – ART code HLHP 14
- CANBUS Control valves control unit alarms – ART code HLHP 15
- CANBUS Control valves control unit alarms – ART code HLHP 16
- CANBUS Control valves control unit alarms – ART code HLHP 17
- CANBUS Control valves control unit alarms – ART code HLHP 21
- CANBUS Control valves control unit alarms – ART code HLHP 22
- CANBUS Control valves control unit alarms – ART code HLHP 23
- CANBUS Control valves control unit alarms – ART code HLHP 24
- CANBUS Control valves control unit alarms – ART code HLHP 25
- CANBUS Control valves control unit alarms – ART code HLHP 26
- CANBUS Control valves control unit alarms – ART code HLHP 31
- CANBUS Control valves control unit alarms – ART code HLHP 32
- CANBUS Control valves control unit alarms – ART code HLHP 41
- CANBUS Control valves control unit alarms – ART code HLHP 42
- CANBUS Control valves control unit alarms – ART code HLHP 43
- CANBUS Control valves control unit alarms – ART code HLHP 81
- CANBUS Control valves control unit alarms – ART code HLHP 82
- CANBUS Control valves control unit alarms – ART code HLHP 83
- CANBUS Control valves control unit alarms – ART code HLHP ??
- CANBUS Control valves control unit alarms – ART code HLHP FF
Method of intervention
- Tools for engine disassembly and reassembly
- Workshop tools for engine disassembly and reassembly
B0 – Engine
- Changing the engine oil
- Engine – Separation from the transmission
- Engine
- Removing and installing the crankcase bleeding
- Removing and installing torsional vibration damper
- Alternator, fuel pump, coolant pump and fan drivebelt
- Alternator, fuel pump, coolant pump and fan drivebelt
- Removal and refitting of the flywheel
- Removing and installing the belt tensioner (V-rib belt)
- Air conditioning compressor drivebelt
- Air conditioning compressor drivebelt tensioning
- Removing and installing the rocker arm housing
- Disassembling, assembling and checking the rocker arm and rocker arm bracket
- Checking that the radiator is clean
- Removing and installing the cooler (exhaust gas recirculation)
- Removing and installing the flutter valve (exhaust gas return)
- Removing and installing the actuator (exhaust gas return)
- Removing and installing the shutoff valve (exhaust gas recirculation)
- Setting the shut-off valve (exhaust return)
- Turbocharger
- Removing and installing the turbocharger
- Compression test
- Assembly and disassembly of the engine on the assembly stand
- Adjustment of valve clearance
- Checking and setting the valve clearance
- Fitting and removing rocker seat
- Removing and refitting rocker seat, checking
- Disassembly and assembly of the cylinder head
- Measuring piston protrusion
- Valve assembly and disassembly
- Valve check
- Check the valve guide
- Check the valve residual
- Test data and settings
- Check the endfloat of the crankshaft
- Check the crankshaft
- Replace the crankshaft O-ring (flywheel end)
- Replacing the crankshaft O-ring (opposite end to flywheel)
- Check the connecting rod drum
- Assembly and disassembly of the crankshaft
- Disassembly and assembly of the piston and connecting rod drum
- Check the piston
- Check the piston rings and piston grooves
- Assembly and disassembly of piston cooling nozzles
- Removal and refitting of the crankcase breather
- Check the cylinder
- Removal and refitting of the front cover (opposite end to flywheel)
- Disassembly and assembly of the gear case cover
- Assembly and disassembly of the camshaft
- Check the camshaft
- Removal and refitting of the rotation device
- Removal and refitting of the heater
- Removal and refitting of the turbocharger
- Removing and fitting the butterfly valve (exhaust gas recovery)
- Removing and fitting the cooler (exhaust gas recovery)
- Removing and fitting regulator unit (exhaust gas recovery)
- Removing and fitting the cutoff valve (exhaust gas recovery)
- Adjusting the cutoff valve (exhaust gas recovery)
- Removal and refitting of the fuel control unit
- Removal and refitting of the high-pressure pump (installation position A)
- Removal and refitting of the high-pressure pump (installation position B)
- Removal and refitting of the common rail
- Removal and refitting of the injectors
- Removal and refitting of the pressure cut-off valve
- Removal and refitting of the oil sump pan.
- Removal and refitting of the oil pickup pipe
- Removal and refitting of the oil cooler
- Removal and refitting of the lube oil cooler housing
- Removal and refitting of the water pump
- Testing the thermostat (after removal)
- Removal and refitting of the torsional vibration damper
- Removing and fitting belt tensioner (ribbed V-belt)
C0 – Engine accessories
- Changing the coolant and flushing the circuit
- Engine cooling system radiator
- Expansion tank
- Fan
- Removing and installing the fan drive
- Removal and refitting of the fan drive system
- Removal and refitting of the fan drive system
- Radiators, coolers – Complete assembly
- Charging air cooling
- Air cleaner assembly
- Removal and refitting of the fuel filter head.
- Fuel tank
- Fuel cooler
- Removing and fitting the fuel delivery pump (driven by ribbed V-belt) (L3)
- Remove and install the heating flange
- Starter motor
- Exhaust pipe – complete assembly
- Exhaust head pipe
- Exhaust silencer
- Air compressor
- Removal and refitting of the supply air pressure/temperature sender
- Removing and fitting the alternator (driven by ribbed V-belt) (L3)
- Engine speed sensor
- Disassembly and assembly of the starter
- Disassembly and assembly of the speed indicator (crankshaft)
- Removal and refitting of the camshaft speed sensor
- Removal and refitting of the exhaust manifold
- Removal and refitting of the rail pressure sensor
D0 – Transmission
- Changing the transmission oil
- Checking the transmission oil level
- Changing the transmission oil filters
- Torsion spring plate
- Rear gearbox
- Pump Drive flange
- Pump Drive flange disassembly
- Adjusting bevel gear set ( … <- )
- Adjusting bevel gear set ( -> … )
- Disassembly of the rear pinion
- PTO clutch
- Disassembling PTO engagement clutch
- PTO assembly
- PTO assembly disassembly
- Adjustment of selector sleeve position
- Propeller shaft – Four-wheel drive output shaft
- Strengthening bracket
- Adjusting the handbrake device
- Disassembly of the transmission
- Removal of transmission
- Disassembly of the clutch control block
- Disassembly of the system control block
- Disassembly of the pump
- Separation of the transmission halves
- Disassembly of the intermediate housing
- Disassembly of the front wheel drive
- Disassembly of clutch KV/KR and double gear
- Disassembly of the output gear
- Disassembly of the input shaft (hydrostatic unit)
- Disassembly of the central shaft (clutch KV/KR)
- Disassembly of the intermediate gear
- Disassembly of the multi-disk brake (BG)
- Disassembly of the drum selector gear (planetary transmission)
- Disassembly of the ring gear P4/BG and clutch K3/K4
- Disassembly of the central shaft
- Disassembly of the hydrostatic unit
- Reassembly of the transmission
- Reassembly of the clutch housing
- Reassembly of the hydrostatic unit
- Reassembly of the central shaft
- Reassembly of ring gear P4/BG
- Reassembly of the multi disk brake (BG)
- Reassembly of the intermediate housing
- Reassembly of the input shaft (hydrostatic unit)
- Reassembly of the intermediate gear
- Reassembly of the central shaft (clutch KV/KR)
- Reassembly of the output gear
- Reassembly of the pump
- Reassembly of clucth KV/KR
- Reassembly of the front wheel drive
- Joining of the preassembled transmission halves
- Setting of the axial play drum selector gear/quill shaft (KV/KR) – Axial play= 0.20 … 0.40 mm
- Setting of the axial play of the KV/KR bearing – Axial play= 0.00 … 0.08 mm
- Setting of the axial play of the double gear bearing – Axial play= 0.00 … 0.08 mm
- Setting of the axial play of the front wheel drive – Axial play= 0.025 … 0.1 mm
- Reassembly of the system control block
- Reassembly of the clutch control block
- Reassembly of the speed and inductive sensor
E0 – Rear axle
- RH/LH rear axle
- Disassembly of LH/RH rear axle
- Disassembly of the planet carrier
- Rear differential
- Disassembly of the rear differential
- Brake assembly and rear axle brake discs
- Renewal of brake seals
- Bleeding air from the hydraulic circuit of the front and rear brakes
F0 – Front axle
- Front support – Complete assembly
- Front axle and swinging support – Complete assembly
G0 – Bodywork – Cab – Platform
- Cab – Complete assembly
- Hood and side panels
- Reservoir-battery support
- RH structural beam
- LH structural beam
- Cab access steps
- Adjustable front fenders
- Cab door lock – cable
- Right-hand console
- Left-hand console
- Instrument panel
- Lower instrument panel
- Seat and multifunction armrest
- Air conditioning control panel
- Air conditioning system
- Air conditioning compressor
- Condenser
- Receiver-drier
- Air conditioning evaporator
- Heating system shut-off valve
- Heater matrix
- Air conditioner RH fan
- Air conditioner LH fan
- Trailer braking air pressure gauge
- Brake master cylinders
- Parking brake tie rod
- Parking brake tie rod – adjustment
- Parking brake tie-rod for trailer air braking valve
- Adjusting parking brake tie-rod for trailer air braking valve
- Steering wheel, steering column switch unit, instrument panel
- PTO levers, control cables
H0 – Hydraulic system
- Power steering pump
- Load Sensing variable displacement pump
- Load Sensing variable displacement pump adjustment
- Power steering valve – Complete assembly
- Power steering disassembly
- Power steering calibration – Complete assembly
- GEARBOX OIL COOLER
- Front axle suspension cylinders
- Front suspension solenoid valves assy
- Front lift locking shut-off valve
- LH directional control valves
- RH directional control valves
- Lift control valve
- Bleeding the braking circuit
- Hydraulic trailer braking valves
- Valve for air trailer braking
- Trailer pneumatic braking valve – Export
- PTO control valve and differential lock
L0 – Electrical system
- Battery
- Alternator
- Engine control unit
- Clutch pedal potentiometer
- Clutch pedal potentiometer
- Accelerator potentiometer
- Electronic lift controls
- Front axle suspension position sensor
- Front axle suspension position sensor calibration
- Transmission operating status display
- Armrest controls
- Shuttle control selector
- Control buttons – RH console
M0 – Front PTO
- Front PTO – Complete assembly
- Front P.T.O. input shaft
- Front PTO flexible coupling
N0 – Front lift
- Front lift – Complete assembly
- Front lift cylinders
R0 – Rear lift
- Lift cylinders
- Disassembly of front lift cylinders
- Position sensor bush
- Lift draft sensor
- Lift position sensor
- Calibration of the position sensor
S0 – Wheels
- Front wheels
- Rear wheels
V0 – Ballast – towing hitches
- Support and towing hitch
- Tightening Torques for Tow Hitches
- Standard fastener hardware: Tightening torque/Tension forces
V1 – AFTERMARKET KITS
- Installation of the air conditioning kit
- Installing supplementary fuse box kit
Wiring diagrams
Introduction
- Introduction
- Structure of the unit
- Wiring looms and components index
- Basic electronics for mechanics (1/2)
- Basic electronics for mechanics (2/2)
- Electrical and electronic components (1/2)
- Electrical and electronic components (2/2)
Components
- Components
Systems
- Earthing points
- Electronic engine control
- Preheating
- Starting
- Diagnostics
- Lights – Version without front lift
- Lights – Version with front lift
- Worklights – Version without front lift
- Worklights – Version with front lift
- Windscreen wiper
- Instrument panel
- Radio
- Air conditioning
- Transmission
- PTO
- Accessories
- CANBUS ELECTRONIC SYSTEM
- Brakes
- Trailer brakes – Version with hydraulic braking
- Trailer brakes – Version with air braking
- Front axle suspension
- Control Valves
- Rear lift
Wiring harnesses
- Battery negative lead – 0.012.4029.4/20
- Positions of battery negative wiring connectors
- Battery positive lead – 0442.2156/20
- Positions of battery positive wiring connectors
- Front axle suspension wiring loom – 0.015.3974.4/10
- Positions of front axle suspension wiring connectors
- Power supply wiring – 0.015.6230.4
- Power supply wiring connector positions
- Engine hood wiring loom – 0.015.7501.4
- Positions of engine hood wiring connectors
- Engine wiring loom – 0421.4410 – 0421.3523
- Engine wiring loom – 0421.5284
- Positions of engine wiring connectors
- Front console wiring loom – 0.015.7458.4/10
- Front instrument panel wiring loom connector positions
- Braking and front lift interface wiring loom – 0.015.7461.4/20
- Positions of braking interface and front lift wiring connectors
- RH transmission wiring loom – 0.015.7459.4/20
- Positions of RH transmission wiring connectors
- LH transmission wiring loom – 0.015.4018.4/20
- Positions of LH transmission wiring connectors
- Lateral instrument panel wiring loom – 0.015.7460.4/30
- Lateral instrument panel wiring connector positions
- Fender wiring loom – 0.015.3692.4/10
- Position of fenders wiring loom connectors
- Directional control valves wiring loom 0.014.1612.4/30
- Positions of control valves wiring connectors
- Air conditioning system wiring loom – 0.900.0783.8
- Air conditioning wiring loom connector positions
- Roof line wiring loom – 0.015.0713.4/30
- Roof wiring connector positions
- Lights selector switch wiring loom – 0443.8656
- Positions of lights selector switch wiring connectors
- Lower front worklights wiring loom on cab – Version without front lift – 0442.5602
- Connector positions of lower front worklights wiring loom on tractor cab – version without front lift
- Windscreen wiper motor wiring loom – 0441.2045
- Windscreen wiper motor connector positions wiring
- Cab lower headlights wiring loom – 0441.1923.4
- Positions of connectors for lower front lights wiring on cab
- Sidelights and front direction indicators wiring loom – 0442.8092.4
- Sidelights and front direction indicators wiring loom connector positions
- Worklights control relay wiring loom – 0.015.3730.4
- Worklights relay connector positions
- Screenwash pumps wiring loom – 0.015.7505.4
- Pump wiring connector positions
- Headlamps test lead wiring loom – 0.013.4085.4/20
- Headlamps test lead wiring connector positions
- Number plate light wiring loom – 0.012.2018.4/20
- Number plate light wiring loom connector positions
- Rotating beacon wiring loom – 0443.6707
- Positions of rotary beacon wiring connectors
- Front lift control wiring loom on drivetrain – 0.015.5429.4/20
- Positions of front lift wiring connectors (on drivetrain)
- Comfort package wiring loom – 0.015.5452.4
- Cab comfort package connectors position
- Trailer braking wiring loom (Italy) – 0.012.6404.4/20
- Positions of trailer braking wiring connectors – Italy
- Pressure switch wiring for air braking system – 04436174/20
- Position of hydraulic braking pressure switch wiring connectors
Service Info
A0 – TRACTOR
- Diagnostics 2026 subscription
- After-sales 2026 subscription
- SERVICE NEWS RESEARCH GUIDE
- Diagnostics 2025 subscription
- After-sales 2025 subscription
- Diagnostics 2023 subscription
- Diagnostics 2024 subscription
- Diagnostics 2022 subscription
- Diagnostics 2021 subscription
- Technical Documentation DVD 06/2009
- Technical Documentation DVD 07/2008
- SDF LUBRICANTS: Lubricant oils and coolant fluids
- After-sales 2024 subscription
- After-sales 2023 subscription
- After-sales 2022 subscription
- After-sales 2021 subscription
- After-sales 2019 subscription
- SDF Parts and SDF Service DVV 04/2014, version 26
- Technical Documentation DVD 03/2010
- New function: Download PDF manuals
- Diagnostics – 2020 subscription
- After-sales – 2020 subscription
- After-sales – 2018 subscription
- Service and Spare Parts – 2017 Subscription
- SDF Parts and SDF Service DVDs 05/2014 version 25
- SDF Parts and SDF Service DVDs 03/2013 version 24
B0 – ENGINE
- Flushing the lubrication circuit
- Deutz AG engine oil specifications
- SerDia 2010 updating license file
C0 – ENGINE ACCESSORIES
- Diagnostic protocol – AdBlue – Float level unit
- Filter and prefilter tool p/n 5.9035.865.0
- Additive for diesel fuel
D0 – TRANSMISSION
- PTO shaft oil seal
F0 – FRONT AXLE
- Carraro front axle model 20.26 Final reduction
- Check the front axle steering knuckles for wear
- Steering behavior check procedure
G0 – BODYWORK – CAB
- Air conditioning system filter-drier
- Air conditioning system recharging
H0 – HYDRAULIC AND PNEUMATIC SYSTEM|
- Hydraulic CUNA trailer braking kit (ITALY)
- Single connection hydraulic braking kit availability update – only for EUROPEAN market
- Resonator failure
- L0 – ELECTRIC AL SYSTEM
