Document overview
Operator's manual for DEUTZ FAHR CUTTING TABLE + TROLLEY 3.6m → 1133-044324 from the CUTTER BARS & TRANSPORT TROLLEYS family. Digital PDF in English, 128 pages.
The original table of contents contains 35 sections and 142 detailed topics, providing a clear view of the systems and procedures covered by this edition.
- INTRODUCTION
- SAFETY
- GETTING TO KNOW THE CUTTER BAR
- INSTALLING AND ADJUSTING CUTTER BAR
- USING THE CUTTER BAR
- TROUBLESHOOTING
- MAINTENANCE
- TECHNICAL DATA
Document details
- Brand: DEUTZ FAHR
- Family: CUTTER BARS & TRANSPORT TROLLEYS
- Model: CUTTING TABLE + TROLLEY 3.6m
- Starting serial number: 1133-044324
- Document type: Operator's manual
- Language: English
- Pages: 128
- File size: 12.71 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that the model and starting serial number of your machine match CUTTING TABLE + TROLLEY 3.6m → 1133-044324.
Complete table of contents
INTRODUCTION
Identification
- Noting the details of the cutter bar/transport trolley
- Transfer of ownership
- Ordering spare parts and supplementary equipment
- Identification plates on cutter bar
- Identification plates on transport trolley
- Punched identification numbers on transport trolley
Warranty
- Terms and conditions of warranty
- Warranty exclusions
SAFETY
Preface
- Operator safety manual
- About this manual
- Responsibilities and obligations
Important information concerning safety
- Correct and improper usage
- Recognising hazards
- Indications for persons in contact with the cutter bar and transport trolley
Safety rules
- Where the risks are
- Preparing the cutter bar safely
- Carry out maintenance in safety
Safety and protective devices
- Safety devices
Safety pictograms
- Introduction to safety pictograms
- Safety pictograms on cutter bar
- Safety pictograms on transport trolley
GETTING TO KNOW THE CUTTER BAR
Overview of cutting table
- Components of standard cutting table
- Components of rapeseed cutting table
- Components of sunflower cutting table
- Rear components of cutting table
- Description of pick-up reel
- Description of central cutter bar
- Description of lateral cutter bars
- Description of crop dividers
- Description of intake auger
Auxiliary cutter bar equipment
- Warnings
- Description of ear lifters
- Installing ear lifters
- Adjusting the height of the ear lifters
- Components of crop dividers
- Adjusting the height of the crop dividers
- Folding the crop dividers inwards
- Adjusting the deflector
- Adjusting the divider
- Intake auger toothed brackets
- Intake auger feed extensions
Overview of transport trolley (CUTTING TABLE + TROLLEY 3.6m -> 1133-044324, CUTTING TABLE + TROLLEY 4.2m -> 1133-044326, CUTTING TABLE + TROLLEY 4.8m -> 1133-044387, CUTTING TABLE + TROLLEY 5.4m -> 1133-044428, CUTTING TABLE + TROLLEY 6.3m -> 1133-0
- Components of short transport trolley
- Components of long transport trolley
- Towing eye
Overview of transport trolley (CUTTING TABLE + TROLLEY 7.2m -> 1133-044412, CUTTING TABLE + TROLLEY 9.0m -> 1133-044471)
- Components of short transport trolley
- Components of long transport trolley
- Towing eye
- Braking system
INSTALLING AND ADJUSTING CUTTER BAR
Adjusting the cutter bar: mechanical adjustments
- Warnings
- Cutting angle
- Intake auger
- Transport teeth
- Clutch joints
- Adjust the cutting angle
- Adjusting the height of the intake auger
- Adjust the joint clutch to the predefined value.
- Setting the joint clutches after a long period out of use
- Adjusting the pick-up reel tines
- Locking the feed passage
Preparing the transport trolley safely
- Warnings
- Hazards and protective devices
Preparing the transport trolley for use on the road (CUTTING TABLE + TROLLEY 3.6m -> 1133-044324, CUTTING TABLE + TROLLEY 4.2m -> 1133-044326, CUTTING TABLE + TROLLEY 4.8m -> 1133-044387, CUTTING TABLE + TROLLEY 5.4m -> 1133-044428, CUTTING TABLE +
- Installing the drawbar
- Installing the carrier plates
- Adjusting the inclination of the carrier plates
Preparing the transport trolley for use on the road (CUTTING TABLE + TROLLEY 7.2m -> 1133-044412, CUTTING TABLE + TROLLEY 9.0m -> 1133-044471)
- Adjust the length of the drawbar
- Installing the carrier plates
- Adjusting the carrier plates
Modifying the standard cutter bar for harvesting sunflower
- Warnings
- Hazards and protective devices
- Key to dividers
- Configuring dividers
- Required equipment
- Overview of procedures
- Remove the pick-up reel
- Fit the walls and dividers
- Fit the feed rollers and the outer dividers
- Fit the chain tensioner and the covers
USING THE CUTTER BAR
Connecting the cutter bar
- Warnings
- Key to colours identifying hydraulic lines
- Overview of mechanical parts
- Overview of procedures
- Connecting mechanical parts
- Connecting the cardan shaft
- Connecting the electrical connector
- Connecting hydraulic lines to the quick connector couplers
- Connecting the hydraulic lines with the multiple connector
Disconnecting the cutter bar
- Warnings
- Overview of mechanical parts
- Overview of procedures
- Disconnecting the cardan shaft
- Disconnecting the electrical connector
- Disconnecting the hydraulic lines with quick connector couplers
- Disconnecting the hydraulic lines with multiple connector
- Disconnecting mechanical parts
Connecting the transport trolley
- Lifting/lowering the jockey wheel.
Preparing the trolley for transporting on a truck
- Transport trolleys for cutter bars from 3.6 to 6.3 m.
- Braked transport trolleys for cutter bars from 7.2 to 9 m.
- Unbraked transport trolleys for cutter bars from 7.2 to 9 m.
- Locking the drawbar in the safe position
TROUBLESHOOTING
- Troubleshooting cutting table faults
MAINTENANCE
Lubrication points of cutting table
- Lubrication points of cutting table: 10 hour interval
- Lubrication points of cutting table: 50 hour interval
- Lubrication points of cutting table: 400 hour interval
cutter bar maintenance
- Warnings
- Hazards and protective devices
- Tools and spare parts required
- Starting conditions
- Overview of procedures
- Replacing the knives and teeth of the cutter bar
- Adjusting and checking function of belts and guides
Standard cutter bar maintenance
- Warnings
- Hazards and protective devices
- Overview of procedures
- Materials, tools and spare parts required
- Starting conditions
- Opening and closing the protective panel
- Grease the hub and bush of the clutch
- Replace the clutch friction linings
- Set the tension of the cutter bar drive V-belt
- Replace the transport teeth
Rape cutter bar maintenance
- Warnings
- Hazards and protective devices
- Materials, tools and spare parts required
- Overview of procedures
- Starting conditions
- Opening and closing the protective panel
- Checking the oil level
- Topping up the oil level
- Replace the oil filter
- Changing the oil
Pick-up reel maintenance
- Warnings
- Hazards and protective devices
- Required equipment
- Overview of procedures
- Starting conditions
- Bleeding the lift cylinders
- Replacing the tines
TECHNICAL DATA
CE declaration of conformity
- Copy of the CE declaration of conformity of the cutter bar
- Copy of the CE declaration of conformity of the cutter bar for rapeseed
- Copy of the CE declaration of conformity of the cutter bar transport trolley
Main technical data
- Introduction
- Technical data
