Document overview
Operator's manual for DEUTZ FAHR C 6205 → 190001 from the C 6000 (STAGE 5) family. Digital PDF in English, 364 pages.
The original table of contents contains 62 sections and 214 detailed topics, providing a clear view of the systems and procedures covered by this edition.
- Introduction
- Safety
- Getting to know the combine harvester
- Electrical system
- Hydraulic System
- Usage
- Fault diagnosis
- Maintenance
- Technical data
Document details
- Brand: DEUTZ FAHR
- Family: C 6000 (STAGE 5)
- Model: C 6205
- Starting serial number: 190001
- Document type: Operator's manual
- Language: English
- Pages: 364
- File size: 42.61 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that the model and starting serial number of your machine match C 6205 → 190001.
Complete table of contents
Introduction
Identification
- Warranty
- Identification of combine harvester
- Identification plates
Safety
Introduction
- Operator safety manual
- About this manual
- Responsibilities and obligations
Important safety information
- Correct and improper use of the combine harvester
- Recognising hazards
- Indications for persons in contact with the combine harvester
Safety prescriptions
- Danger areas
- Preparing the combine harvester safely
- Driving the combine harvester safely in the field and on the road
- Performing maintenance safely
Safety and protection devices
- Safety devices
Good practice
- Good working practices
Safety pictograms
- Introduction to safety pictograms
- Safety pictograms
Hazards connected to the environment
- Hazards associated with the operating environment
- Sources of danger on the combine harvester
Getting to know the combine harvester
Boarding the vehicle
- Boarding the vehicle
Cab
- Air conditioning vents
- Internal illumination
- Seat area
Overview of systems and assemblies
- Overview
- Overview of engine
- Overview of cutting table
- Overview of threshing section
- Overview of the grain cleaning and tailings return system
Views of combine harvester
- External views of combine harvester
- Internal views of combine harvester
Instruments and controls
- Steering wheel and pillars
- Right-hand console
- Cab headliner
- Pedal controls
- External controls
- On-board computer: introduction
- On-board computer: Information area
- On-board computer: indicator lamp area
- On-board computer: Grain loss monitoring area
- Cutting table control system (EMR-D): introduction
- Cutting table control system (EMR-D): fault indication
- Video surveillance system: description
- Camera vision system: Use
Electrical system
- Introduction to the electrical system
Battery
- Work on battery
Fuse
- Fuses and relays
Lighting
- Replace the bulbs in the road lights
- Changing the interior courtesy light bulbs
- Replacing the bulbs in the work lights and maintenance lights
Other equipment
- Installation of electronic components and/or equipment
Hydraulic System
Introduction to the hydraulic system
- Hydraulic systems
Hydraulic system components
- Overview of hydraulic system components
- Hydraulic oil reservoir
- Hydraulic pumps
Steering system
- Steering system
Control valves
- Warnings
- Accessing the control valves
- Control valve functions
- What to do in the event of a fault
Usage
Climbing on board and leaving the combine harvester machine
- Accessing the operator seat
- Accessing maintenance points
Parking the combine harvester
- Procedure for making the machine safe
Initial adjustments
- Adjusting the driver position
- Adjusting the GRAMMER MSG95G/732 operator seat
- Adjusting the GRAMMER MSG85/722 operator seat
- seat belts
- Passenger seat
- Cab air conditioning
- Refrigerator box
- Metal ballast
- Liquid ballast
Preparing the combine harvester
- Connecting the cutter bar
- Disconnecting the cutter bar
- Auxiliary cutter bar equipment
- Checking the lights
- Preparing the brakes
- Modifying the standard cutter bar for harvesting sunflower
- Extend/retract grain tank extension
- Adjusting the cutter bar: mechanical adjustments
- Adjusting the cutter bar: electrical adjustments
- Adjusting the chaff spreader
- Calibrating the cutter bar
- Preparing the cleaning system
- Preparing the wheels and axle
- Tyre list
- Tyre combinations
Preparing the threshing system
- Preparing the threshing system
- Removing and refitting the concave segments
- Emptying and adjusting the stone trap
- Adjusting the position of the concave.
- Adjusting the turbo separator speed
- Checking the position of the threshing drum
- Adjusting the position of the de-awning plates
- Adjusting the aperture of the de-awning plates
- Adjusting the dust plates
- Cleaning the obstruction sensors
- Use the belt tension check mode
Combine harvester adjustments
- Adjusting the threshing section
- Adjusting the cleaning mechanism
Driving the combine harvester
- Starting/stopping the combine harvester
- Driving the combine harvester forwards
- Using the brakes
- Driving in the field.
- Driving on the road
- Towing the combine harvester.
Cutting table
- Controlling the cutter bar
Towing
- Towing hitches with lock pin
- Automatic tow hook
Fault diagnosis
- Introduction to troubleshooting
- List of error codes on on-board computer
- Cab troubleshooting
- Electrical system troubleshooting
- Troubleshooting threshing section components
- Troubleshooting grain cleaning system faults
- Troubleshooting cutting table faults
- Troubleshooting the tailings return system
Diesel particulate filter regeneration cycle
- Warnings
- Function of diesel particulate filter
- Regenerating the diesel particulate filter
- Regeneration cycle
Maintenance
Maintenance warnings
- Warnings
- Safe maintenance
General checks
- Checks at start of working day
- Checks required before use
General instructions for maintenance
- Fluids – Lubricants and fill volumes
- Coolant
- Lubricate
- Maintenance of drive belts and chains
- Spare parts
- Welding safely
- Screw maintenance
- Variator maintenance
Maintenance of external parts
- Washing the combine harvester
Safety device maintenance
- Safety device maintenance
Maintenance intervals
- Maintenance table – 1st Service
- Maintenance table
- Contact an authorised service centre
Maintenance in cab
- Cab air filter maintenance
- Cab headliner maintenance
System maintenance
- Checking the screen washer system
- Bleeding the fuel system circuit
- Draining water from the fuel prefilter
- Replacing the fuel prefilter
- Replacing the fuel filter
- Check and top up the battery electrolyte level
- Check that the lights and electronic devices function correctly
- Checking and topping up the brake fluid
- Bleeding air from the brake system
- Check the brake pedals
- Cleaning or replacing the filter in the oil return line from the hydraulic motor
- Checking the oil lines
- Checking and topping up the hydraulic system oil level
- Changing the hydraulic system oil
- Changing the hydraulic oil filter in the return circuit
- Replace the hydraulic drive pump filter:
- Air conditioning system maintenance
Lubricate
- Adjusting the centralised lubrication system
- Lubrication points of cutting table
- Lubrication points on left hand side: 10 hour interval
- Lubrication points on left hand side: 50 hour interval
- Lubrication points on left hand side: 400 hour interval
- Lubrication points on right hand side: 10 hour interval
- Lubrication points on right hand side: 50 hour interval
- Lubrication points on right hand side: 400 hour interval
Belt maintenance
- Adjusting the belt clutches
Engine maintenance
- Maintenance and general care of the engine
- Check and top up the coolant level
- Checking and topping up the engine oil
- Change the engine oil
- Replace the engine oil filter
- Replacing the engine air filter
- Replacing the AdBlue® pump
- Clean the radiator and coolers
- Cleaning the engine ventilation system
Transmission maintenance
- Checking and topping up the axle oil level
- Changing the axle oil
- Adjusting length of tensioner roller springs
- Lubricating the gearbox control linkage
- Checking and changing the transmission oil
- Changing the transmission oil
Wheel maintenance
- Checking wheels and tyres
Cutting table maintenance
- cutter bar maintenance
- Pick-up reel maintenance
- Standard cutter bar maintenance
- Rape cutter bar maintenance
Threshing section maintenance
- Feed passage maintenance
- Threshing drum reduction gear maintenance
- Cleaning the threshing section
- Adjusting the turbo separator
- Tailings return system maintenance
- Adjusting the straw walker cowl
Grain transport system maintenance
- Grain transport system maintenance
Waste distribution system maintenance
- Chaff spreader blower maintenance
Decommissioning and scrapping
- Decommissioning and scrapping the combine harvester and disposing of packaging materials
Storage of the combine harvester
- Storing the combine harvester when not in use
Technical data
Technical data
- Main technical data
- EC Declaration of conformity
Dimensions, weights and speeds
- Dimensions and weights
Threshing section adjustments
- Threshing section settings for different crop types
- Threshing section settings for harvesting soft wheat
- Threshing section settings for harvesting durum wheat
- Threshing section settings for harvesting maize
- Threshing section settings for harvesting maize mix
- Threshing section settings for harvesting rice
- Threshing section settings for harvesting oats
- Threshing section settings for harvesting winter barley
- Threshing section settings for harvesting linseed
- Threshing section settings for harvesting spring rye
- Threshing section settings for harvesting alfalfa
- Threshing section settings for harvesting sunflower
- Threshing section settings for harvesting rapeseed
- Threshing section settings for harvesting soy
- Threshing section settings for harvesting beans
- Threshing section settings for harvesting peas
