Document overview
Operator's manual for DEUTZ FAHR AGROFARM 410 T → ZKDP9602W0TD01001 from the Agrofarm T-TB (STAGE 3A) family. Digital PDF in English, 276 pages.
The original table of contents contains 61 sections and 199 detailed topics, providing a clear view of the systems and procedures covered by this edition.
- Preface
- IDENTIFICATION
- SAFETY
- GETTING TO KNOW YOUR TRACTOR
- USING THE TRACTOR
- STORING THE TRACTOR
- MAINTENANCE OPERATIONS
- FAULT DIAGNOSIS
- WHEELS
- ELECTRICAL SYSTEM
- TECHNICAL DATA
Document details
- Brand: DEUTZ FAHR
- Family: Agrofarm T-TB (STAGE 3A)
- Model: AGROFARM 410 T
- Starting serial number: ZKDP9602W0TD01001
- Document type: Operator's manual
- Language: English
- Pages: 276
- File size: 18.76 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that the model and starting serial number of your machine match AGROFARM 410 T → ZKDP9602W0TD01001.
Complete table of contents
Preface
Important
- Warnings
- Handover of the tractor to the customer
- To the owner of the new tractor
IDENTIFICATION
- List of model serial numbers
Identification plates
- Tractor identification plates
- Tractor serial number
- Engine number
- Engine identification plate
- ROPS identification plate
- Original spare parts
Warranty
- Delivery and installation
- Warranty procedure
- Transport
- Post-warranty assistance
SAFETY
- Introduction
Practical advice on safe working procedures
- Protect the Environment
- General safety rules
Accident prevention and personal safety
- Safety clothing and equipment
- Exposure to noise
- Protection and safety devices
- Daily check of the tractor and implements
- Boarding and alighting from the tractor
- Parking the tractor
- Cleaning the tractor
Operation
- Start
- Checking indicator lights
- Starting fluids
- Auxiliary equipment
- Towing safely
- Driving on the road
- Overturning
- Maintenance
Safety roll bar (ROPS)
- Roll Over Protective Structure (ROPS)
- Falling Object Protective Structure (FOPS)
- Operator Protective Structure (OPS)
- Use of hazardous substances
Decommissioning and disposal of the tractor
- Decommissioning the tractor
- Decommissioning and disposal of the tractor
Safety warning notices
- Adhesive safety warning decals
GETTING TO KNOW YOUR TRACTOR
Exterior views of the tractor
- External views of the tractor
Access to the driving position
- Access to the driving position
Operator seat
- Operator seats
- KAB XH2 seat (AGROFARM 410 T ->1001, AGROFARM 420 T ->1001)
- “GRAMMER MSG83/7L” seat with mechanical suspension and PVC upholstery (AGROFARM 410 T ->1001, AGROFARM 420 T ->1001)
- “COBO MT” seat with sensor (AGROFARM 410 T ->5001, AGROFARM 420 T ->5001)
- Seat belt
Steering wheel
- Steering wheel
Rear-view mirrors
- External rear-view mirrors
Instruments and tractor controls
- Instruments and tractor controls
- Instrument panel (AGROFARM 410 T ->1001, AGROFARM 420 T ->1001)
- Digital instrument panel
- Console switches
- Steering wheel stalk control
- Right-hand console
- Folding type ROPS
- Use and Maintenance Handbook
- Fire extinguisher
- Hazard warning triangle
- Wheel chock
- Tool box
Other controls
- Control pedals
- Clutch pedal
- Brake pedal
- Parking brake lever
- Accelerator pedal
- Electronic hand throttle
- Transmission controls for tractors with mechanical shuttle
- Transmission controls for tractors with hydraulic shuttle
USING THE TRACTOR
Introduction
- Engine – first 50 operating hours
Starting – Stopping the engine
- Starting the engine:
- Switching off the engine
- Turbocharging using the turbocharger
Transmission
- Transmission (AGROFARM 410 T ->1001, AGROFARM 420 T ->1001)
- Transmission (AGROFARM 410 T ->5001, AGROFARM 420 T ->5001)
- Mechanical shuttle (AGROFARM 410 T ->1001, AGROFARM 420 T ->1001)
- Hydraulic shuttle (AGROFARM 410 T ->5001, AGROFARM 420 T ->5001)
Four-wheel drive – Differential lock
- Engaging front-wheel drive
- Front and rear differential lock
Braking
- Brakes, “SEPARATE BRAKES” Valve
- Hydraulic trailer braking
- Mixed-automatic air braking system
Rear PTO
- Power take-off
- Rear PTO (540-1000 rpm)
- “ECONOMY MODE” PTO
- Groundspeed PTO
Hydraulic rear lift
- Hydraulic lift
- Mechanically controlled rear load sensing lift
3-point linkage
- Three-point hitch
Hydraulic system
- Hydraulic system
- Remote valve
- Types of remote control valve
- Remote valve controls
- Correspondence between the control levers and the rear hydraulic couplers
- Behaviour of the oil flow in the hydraulic circuit connecting the couplers and the actuator cylinders on the implement
Towing devices
- Towing devices
- Adjusting the height of the towing hitch
- Drawbar
- Angle brackets for towing hitches
- Towing hitch with lock pin
- Standard long hitch support frame
- Towing hitch with safety lock
- Semi-automatic towing hitch
- Automatic towing hitch
- Piton Fix or ball towing hitch frame
- Front towing hitch
STORING THE TRACTOR
- Operations prior to long term garaging
- Preparing the tractor for use after a long period of inactivity
MAINTENANCE OPERATIONS
Maintenance operations
- Maintenance intervals
- Washing the tractor/attached implements
- Fluids / lubricants and fill volumes
- Service intervals
- Maintenance and inspection schedule
Accessing the engine compartment
- Accessing the engine compartment
Daily intervention
- General inspection of the tractor
- Oil level check
- Checking coolant
- Checking the fuel level
- Bleeding the fuel circuit
- Check the electrical system
Maintenance every 50 hours
- Checking the transmission oil level
- Grease the rear axle
- Greasing the front axle (2WD)
- Greasing the front axle (4WD)
- Checking clutch and brake reservoir oil level
- Check the battery
- Greasing the rear 3-point linkage
- Checking wheels and tyres
Maintenance at 100 hours (1st service)
- Checking the braking distance
- Checking engine drive belt tension
- Changing the engine oil
- Changing the engine oil filter cartridge
- Checking that the radiator/coolers are clean
- Changing the fuel filter and settling filter
- Check the parking brake lever
- Checking the oil pipelines
Maintenance every 250 hours
- Check front PTO oil level (4WD)
Maintenance every 500 hours
- Renewing gearbox oil filters, hydrostatic steering, lift
- Checking the differential lock system
- Checking the braking system with safety brakes valve
Maintenance every 1000 hours or at least once a year
- Fuel injection pump maintenance
- Cleaning engine air filter – Changing air filter cartridge and internal safety cartridge
- Starter motor maintenance
- Bleeding air from the hydraulic circuit of the front and rear brakes
- Bleeding the hydraulic clutch circuit
Maintenance every 1000 hours or at least every two years
- Changing the coolant and flushing the circuit
- Changing the transmission oil
- Changing the front wheel hub oil (2WD)
- Changing the differential oil, planetary reduction unit oil and side final drives oil (4WD)
FAULT DIAGNOSIS
Towing the tractor
- Towing with the engine running
- Towing with the engine off
- Safe transport of the tractor
- Lifting the tractor
- Engine troubleshooting
- Gearbox troubleshooting
- Front and rear power take-off troubleshooting
- Front-wheel drive troubleshooting
- Brakes troubleshooting
- Lift troubleshooting
- Hydraulic system troubleshooting
- Hydraulic remote valves troubleshooting
- Electrical system troubleshooting
- Fault diagnosis
Transmission and hydraulic shuttle alarms
- Display of alarms
Instrument panel alarms
- Display of alarms
- P.T.O. self-diagnosis indicator light.
WHEELS
Introduction
- General information regarding tyres
- Punctures
- Wheel nut/bolt tightening torques
Tyre combinations
- Permissible tyre combinations
- Calculation of the mechanical lead
- Tyre load capacities
Track width calculation
- Minimum track width
- Track width adjustment
- Adjustment of the front fenders (2WD)
- Adjustment of the front fenders
Ballasting
- Handling ballast weights
- Ballast for tractor
- Front ballast with cast-iron blocks
- Front ballast with cast-iron blocks
- Ballast for wheels with metal discs
- Ballast for wheels with water-filled tyres
ELECTRICAL SYSTEM
Battery
- Battery
Cab fuse box
- Cab fuse box
- Key to fuse and relay symbols
Lights for road use
- Lights for road use
- Headlight alignment
- Road lights – North America version
Worklights
- Worklights
Accessories
- Installation of additional electronic components and/or equipment
- Power outlet sockets
TECHNICAL DATA
- Declaration of conformity
Technical data of the tractor
- Technical data
- Fuel technical characteristics
- Biofuels – technical characteristics
- Coolant
- Noise levels
- Vibration referred to the operator position
Dimensions and weights
- Tractor dimensions, weights and speeds
Implement attachment diagrams
- Implement coupling holes diagram
