Document overview
Operator's manual for DEUTZ FAHR 8260W from the Series 8W family. Digital PDF in English, 352 pages.
The original table of contents contains 73 sections and 246 detailed topics, providing a clear view of the systems and procedures covered by this edition.
- IDENTIFICATION
- SAFETY
- GETTING TO KNOW YOUR TRACTOR
- USING THE TRACTOR
- WHEELS
- BALLASTING
- ELECTRICAL SYSTEM
- MAINTENANCE OPERATIONS
- TROUBLESHOOTING OF FAULTS AND EMERGENCIES
- TECHNICAL DATA
Document details
- Brand: DEUTZ FAHR
- Family: Series 8W
- Model: 8260W
- Document type: Operator's manual
- Language: English
- Pages: 352
- File size: 29.39 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that the model and starting serial number of your machine match 8260W.
Complete table of contents
IDENTIFICATION
Tractor identification
- Models and serial numbers
- Make a note of your tractor data
- Ordering spare parts and supplementary equipment
- Identification plates
- Change of ownership of the tractor.
Glossary
- Technical terms used in this manual
- Acronyms used in this manual
- Units of measurement used in this manual and conversion factors
Warranty
- Warranty terms and conditions
- Exclusions to the warranty
- Intended use
- Conditions rendering the warranty null and void
Component icons
- Icons used in this manual
SAFETY
Preface
- Operator safety manual
- About this manual
- Responsibilities and obligations
Important safety information
- Correct and incorrect use of the tractor
- Recognising hazards
- Indications for persons in contact with the tractor
Safety prescriptions
- Danger areas
- Risks during tractor preparation
- Risks when driving in the field and on the road
- Risks during maintenance
- Using the front loader
Safety and protection devices
- Safety devices
- Protective devices
- ROPS roll bar
Good practice
- Good working practices
Safety pictograms
- Introduction to safety pictograms
- Safety pictograms
Hazards connected to the environment
- Hazards associated with the operating environment
- Hazards on the tractor
GETTING TO KNOW YOUR TRACTOR
Views of the tractor
- External views of the tractor
- Views of cab interior
Boarding the vehicle
- Access to the driver seat
Cab
- Operator Protective Structure.
- Internal illumination
- Front sun blind
- rear window hatch
- Air conditioning vents
- Document pocket for the operator’s manual
Instruments and controls
- Front console and cab pillars
- Instrument panel
- Right hand console
- Left hand console
- Roof panel
- Lights control panel
- Provision for installation of radio and speakers
USING THE TRACTOR
Boarding the vehicle
- Climbing onto and off the tractor, tractors with cab
- Emergency exits
Initial adjustments
- Adjusting the steering wheel
- Adjusting the GRAMMER MSG95A/721 operator seat
- Fastening and unfastening the operator’s seat belt
- Passenger seat
- Manually adjusting the rear-view mirrors
Commonly used controls
- Shuttle lever
- Steering column stalk
- Clutch pedal
- Accelerators
- Brakes
- Parking/emergency brake
- Cab air conditioning
Parking the vehicle
- Leaving the tractor in safe conditions
- Immobilising the tractor using the wheel chocks
Engine
- Recommendations for first 50 operating hours
- Fuels and additives
- Refuelling
- Starting and stopping the tractor
Transmission
- Introduction to the transmission
- Transmission controls and indicator lamps
- Selecting work range, gear and drive direction
- Driving the tractor
- Front wheel drive and differential lock
PTO
- PTO configurations
- Coupling and uncoupling PTO-driven implements
Front PTO
- Front PTO – description and versions
- Front PTO controls and indicator lamps
- Operating the front PTO from the cab
Rear PTO
- Rear PTO description and configurations
- Rear PTO controls and indicator lamps
- Operating the rear PTO from the cab
- Operating the rear PTO from the ground
- Rear PTO in automatic mode
Lifts
- Lift configurations
- Correct practice for transporting implements
Front lift
- Front lift
- Front lift controls
- Operating the front lift from the cab
- Adjusting the front lift
- Attaching/detaching implements to/from the front lift
Rear lift
- Rear lift
- Rear lift controls and indicator lamps
- Setting rear lift control functions
- Operating the rear lift from the cab
- Operating the rear lift from the ground
- Rear 3-point linkage
- Adjusting the 3-point linkage
- Hitching and unhitching implements to/from the 3-point linkage
Hydraulic system
- Hydraulic distributor configurations
- Hydraulic distributor operating modes
- Hydraulic distributor controls
- Connecting/disconnecting implements to/from hydraulic distributors
- Operating the hydraulic distributors
- Example of operating a reversible plough
- Example of operating a hydraulic motor
- Example of operating the tipping trailer
Towing
- Towing devices
- Trailer towing eye-towing hitch compatibility
- Technical characteristics of towing hitches
- Hydraulic trailer braking
- Pneumatic trailer brake
- Connecting the electrical system of the trailer
Towing devices
- Drawbar
- Hitch support frame
- Adjusting the height of the towing hitches
- Towing hitch with lock pin
Monitoring and programming
- Using the instrument panel
- Instrument cluster parameters
WHEELS
Tyres
- Basic information concerning tyres
- Punctures and changing tyres
- Wheel nut/screw tightening torques
- Steering angle adjustment
- Adjusting steering angle for axles with four limit screws
- Adjusting steering angle for axles with two limit screws
- Front/rear tyre combinations
- Inflation pressures, load index and speed rating of tyres
- Load capacities of radial tyres and speed ratings
- Load capacities of conventional/cross-ply tyres and speed ratings
Adjustments
- Calculating the mechanical lead
- Axle width
- Adjusting track widths
- Adjusting track width with variable track half axles
- Adjustable front mudguards
BALLASTING
Stability
- Weighing the tractor
- Tractor/implement combination
Ballasting
- Ballasts
- Ballast mount
- Intermediate plate
- Suitcase ballast weights
- Monolithic block
- Metal discs for wheels
- Liquid ballast for tyres
ELECTRICAL SYSTEM
- Introduction to the electrical system
Battery
- Battery
Fuses
- Fuses and relays in main fuse box
- Fuses and relays on right hand side of the battery
Lights
- Replacing the bulbs in the road lights
- Replace the bulbs in the work lights
- Changing the interior courtesy light bulbs
- Adjust the headlights for road travel
Other equipment
- Installation of electronic components and/or equipment
- Electrical power sockets/ports
MAINTENANCE OPERATIONS
Maintenance warnings
- Safe maintenance
Washing the tractor and implements
- Warnings
- Hazards and protective devices
- Required equipment
- Starting conditions
- Washing the exterior of the tractor
- Washing the interior of the cab
Accessing the engine compartment
- Warnings
- Hazards and protective devices
- Starting conditions
- Overview of procedures
- Open and close the hood
Tool box
- Open and remove the tool box
Storing the tractor
- Overview of procedures
- Operations prior to a long period of non-use
- Operations after a long period of non-use
Decommissioning and scrapping the tractor harvester and disposing of packaging materials
- Decommissioning the tractor
- Scrapping the tractor
- Disposing of packaging materials
Fluids and lubricants
- Fluids – Lubricants and fill volumes
- Coolant
Intervals
- Maintenance table – 1st Service
- Maintenance table
Tractor
- General inspection of tractor
- Lubrication and greasing
- Contact an authorised service centre
Engine
- Check and top up the engine oil level
- Change the engine oil
- Changing the engine oil filter
- Check and top up the coolant level
- Changing the engine coolant
- Cleaning the radiators
Engine accessories
- Checking and replacing the engine air filter elements
- Draining water and sediment from the fuel prefilter
- Replacing the fuel filter
- Replacing the fuel prefilter
- Bleed air from the fuel circuit
Transmission
- Checking and topping up the transmission oil level
- Replace the transmission oil and filter
Rear axle
- Checking and topping up the oil level in the final drive units of the rear axle housings
- Change the oil in the rear final drive units and axle housings
Front axle
- Checking and topping up oil level in front axle and final drive units
- Change the oil in the front axle and final drive units
- Check the state of wear of the gaiters of the steering system
Cab
- Check the liquid detergent level
- Replacing and cleaning the “Category 2” external cab air filter
- Cleaning and replacing the internal cab air filters
Hydraulic and pneumatic system
- Checking and topping up the hydraulic utilities system oil level
- Changing the hydraulic utilities oil
- Change the hydraulic utilities oil filter
- Drain the water from the air braking system
- Check and top up the brake oil level
- Bleed air from the braking hydraulic system
- Checking the oil lines
- Check the brake pedals
- Checking accumulators
Electrical system
- Check and top up the battery electrolyte level
Front PTO
- Checking and topping up the front PTO oil level
- Change the front PTO oil
- Change the front PTO oil filter
Wheels
- Checking wheels and tyres
Ballast and hitches
- Maintenance of towing devices
- Check the ballast weights
TROUBLESHOOTING OF FAULTS AND EMERGENCIES
Fault diagnosis
- Introduction to alarms
- Introduction to troubleshooting
- Troubleshooting for entire tractor
- Engine troubleshooting
- Transmission troubleshooting
- PTO troubleshooting
- Lift troubleshooting
- Brakes troubleshooting
- Hydraulic system troubleshooting
- Distributor troubleshooting
- Cab troubleshooting
- Electrical system troubleshooting
Emergencies
- Emergency types
- Emergency starting
- Emergency control of rear lift
- Towing the tractor in the event of a breakdown
- Transporting a disabled vehicle
- Front emergency tow device
- Lift the tractor
- Tractor lifting points
TECHNICAL DATA
Main technical data
- Introduction
- Tractor technical data
- Operator cab technical data
- Noise technical data
- Vibrations technical data
- Power delivered by the front PTO
- Power delivered by the rear PTO
- Maximum towable mass
- Dimensions and weights of the tractor
Ballasts – Technical data
- Available ballasts
- Tractor speed
