Document overview
Digital Workshop Manual documentation for model SAME Virtus 125 → ZKDGY20200TS50001 from the VIRTUS (STAGE 5) family. Language: English; 2,087 pages.
The corresponding English table of contents contains 52 sections and 626 individual topics.
Main sections included
- Introduction
- Safety
- Technical characteristics
- Calibrations and electronic diagnosis
- Method of intervention
- Wiring diagrams
- Service Info
Document details
- Brand: SAME
- Family: VIRTUS (STAGE 5)
- Model: Virtus 125
- Starting serial number: ZKDGY20200TS50001
- Document type: Workshop Manual
- Language: English
- Pages: 2,087
- File size: 463.85 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that your machine model and reference code match SAME Virtus 125 → ZKDGY20200TS50001.
Complete table of contents
Introduction
- Tightening torques
- Pump tightening torques
- Wheel nut/screw tightening torques
- Tightening torques for nuts and bolts of electrical connections
- Installation of solenoid valves and cartridge valves
- Installation of quick couplers
- Units of measurement and conversion factors
Safety
Preface
- Important notes concerning safety
Important safety information
- Recognising hazards
- Indications for persons in contact with the tractor
Safety rules
- Risks during tractor preparation
- Risks during maintenance
- Work on machine systems
- Special disassembly/assembly/inspection procedures
Safety pictograms
- Replacing safety pictograms
Environmental risks
- Hazards associated with the operating environment
Technical characteristics
Engine
- Introduction – Engines
- Cold start system (preheat glow plugs)
- Engine cooling system
- Engine intake system
- Engine injection system – low pressure circuit
- Exhaust backpressure, engine oil temperature
- Fuel injection system – Common Rail System
- Engine air intake system
- Turbocharging system
- Exhaust gas recirculation system (EGR)
- Exhaust aftertreatment system
- Technical data and exhaust gas after-treatment systems – KF stage 5 engine
- Technical data, rockers – tappets
- Technical data and dimensions: valves – valve springs
- Technical data and dimensions: heads – valve guides – valve seats
- Technical data: counter-rotating masses
- Technical data: timing system gears
- Camshaft technical data
- Technical data: Connecting rods
- Technical data: pistons – piston rings
- Technical data: crankshaft
- Technical data: cylinder block
Engine accessories
- Coolant radiator
- Air filter
- Diesel fuel tank
- Starter motor
- AdBlue® technical characteristics
- AdBlue pump
- AdBlue injector
- AdBlue valve
- AdBlue tank
- AdBlue float
Transmission
- Transmission
- Transmission
- Hydraulic reverse shuttle
- Rear power take off
Rear axle
- Rear wheel carrier
- Park brake unit
- Rear differential
Front axle
- Front axle 4 WD
- Disc type front differential lock (ASM)
- Planetary reduction gearbox
Bodywork – Cab – Platform
- External views of the tractor
- Viste interni cabina
- Front console and cab pillars
- Right hand console
- Left hand console
- Roof panel
- Instrument panel
- Main technical data
- Dimensions and weights of the tractor
Hydraulic system
- Transmission hydraulic circuit, base version
- Transmission hydraulic circuit, full house version
- General introduction to the A/C system
- Air conditioning system
- A/C system – Version with standard roof
- Air conditioning system controls – High-visibility roof system
- Air conditioning system – Diagnostics
- Air conditioning compressor
- Hydraulic pump unit
- 45 cc variable displacement pump
- Gear pump
- Suction pump filter
- Delivery line filter
- Braking system
- Park Brake system
- Park Brake valve
- Hydraulic Engine Brake
- Power steering 80 -160cc
- Power steering SDD 125-250cc
- Power steering SDD 115-240cc
- Front axle suspension
Electrical equipment
- FARMotion engine sensors
- Sensors and components of the FARMotion engine exhaust system
- FARMotion engine components
- Engine wiring loom
- Electro-injector wiring loom
- Preheat glow plug wiring loom
Front PTO
- Front PTO
Front lift
- Front lift
Rear lift
- Rear 3-point linkage
- Rear lift
Calibrations and electronic diagnosis
Diagnostic tools
- D-Tech and diagnostic ports
- D-TECH App
Commissioning and calibrating the tractor
- Commissioning procedure (EOL)
- ECU reset (MVCU+GTECU+SVCU)
- Set vehicle model (MVCU)
- Distributor configuration
- Maximum vehicle speed
- Tyre type
- Language
- Units of measurement
- Rapid steer system (SDD)
- Front power take-off (PTO)
- PTOSyncro
- Automatic A/C system
- Engine brake (HEB)
- eVISCO
- 4WD
- iMonitor
- ISO 11786
- Iso 11783
- Agrosky
- Font Susp.
- ASM (Automatic Steering Management)
- Mechanical diverter
- Stoll
- Pneumatic trailer brake
- Hydraulic trailer braking
- eTCV parameters configuration
- Hand brake position calibration
- Clutch Pedal calibration (only with Deutz AG motorization)
- Accelerators calibration (only with Deutz AG motorization)
- Rear hitch position calibration
- Steering angle calibration
- Front suspension calibration
- IMU calibration
- PTO calibration
- Work reverse clutch calibration
- Hydrostatic unit calibration
ECU alarms
- SDF Severity of alarms
- ECU ALARMS
Software management
- ECUs firmware update
- Commissioning procedure (EOL)
- ECU reset (MVCU)
- Vehicle model selection
- Cluster configuration
- Maximum vehicle speed
- Tyre type
- Measurement unit
- Range
- Front Power Take-Off (PTO)
- ISO 11786
- Pneumatic trailer brake
- Hydraulic trailer brake MR
- Hydraulic trailer brake
- Rapid steer system (SDD)
- ASM (Automatic Steering Management)
- Font Susp.
- Clutch Pedal calibration
- Rear hitch position calibration
- Front suspension calibration
- HML calibration
- PowerShuttle
Method of intervention
B0 – Engine
- Complete engine
- Separating engine from transmission
- Engine flywheel
- Removing and refitting the poly-V-belt
- Tightening procedure for engine components
- Overhauling counter-rotating masses
- Adjusting oil pump gear backlash
- Aligning water pump and crankshaft pulleys
- Power take off gear backlash adjustment
- Test of the thermostat valve
- Engine block-gearbox connector flange
- Cooling jets
- Engine flywheel
- Belt tensioner mounting plate.
- Automatic belt tensioner
- Ancillary utility belt
- Crankshaft pulley and tone wheel
- Crankshaft pulley complete with tone wheel
- Counter-rotating masses
- Crankshaft
- Disassembling pistons and connecting rods
- Cylinder sleeves
- Power take off drive
- Front timing cover
- Rear flange
- Cylinder head covers
- Pushrods
- Cylinder heads
- Intermediate gear and timing
- Disassembling the cylinder heads
- Engine oil and filter
- Turbocharger oil pipes
- Blow-by filter
- Blow-by oil vapour pipe
- Oil sump
- Oil pump
- Oil vapour pipe
- Electro-injectors and common rail
- Thermostat valves
- Coolant manifold
- Oil heat exchanger
- Engine coolant pump
- EGR exhaust gas recirculation pipe
- Water in fuel sensor
- EGR exhaust gas cooling pipe
- EGR manifold
- Disassembly of the EGR manifold
- Exhaust gas pressure line
- Exhaust manifold
- Intake manifold
- Turbocharger
- Turbocharger exhaust outlet flange
- Mass air flow sensor
- EGR valve
- AdBlue injector
- NOx sensor
- DOC outlet side exhaust temperature sensor
- DOC inlet side exhaust temperature sensor
- Exhaust gas pressure sensor
- Throttle valve actuator
- Alternator
- Boost pressure sensor and air temperature sensor
- Mass air flow sensor
- Crankshaft speed sensor
- Camshaft timing sensor
- Engine oil pressure switch
- Coolant temperature sensor
- Engine oil temperature sensor
- Fuel pressure sensor
C0 – Engine accessories
- Replacing the coolant
- Water radiator
- Expansion tank
- Fan
- Air filter
- Intercooler
- Oil radiator
- Diesel radiator
- Manual fuel pump
- Diesel fuel tank
- Fuel and filter and prefilter
- DOC exhaust silencer
- Drain pipe
- Intermediate manifold
- AdBlue tank
- AdBlue pump
- Air conditioning compressor
- Bleeding the fuel system (fuel system with mechanical fuel delivery pump)
- Alternator mount
- Transverse plate
- Mounting brackets
- Fuel pump
- Fuel prefilter
- Fuel filter
- Filter mounting plate
- High pressure fuel pump
- Glow plug
- Preheat relay
- Starter motor
- Exhaust pipe
- DOC outlet side exhaust flange
- DOC inlet side exhaust flange
- DOC exhaust silencer
- Air compressor
D0 – Transmission
- Draining and filling the transmission oil
- Separating the gearbox housing from the rear gearbox housing
- Shuttle unit – Complete assembly
- Disassembly of the shuttle unit
- Disassembly of the cover unit
- Clutch assembly: Forward Drive
- Clutch assembly: Reverse
- Disassembly of the forward drive clutch assembly
- Disassembly of the reverse drive clutch assembly
- Shimming HML Shaft – Assembly standard: 939177
- Disassembling the Low range clutch – Version with HML
- Disassembling the HML unit
- Refitting and adjusting HML unit
- Disassembling the outer HML housing
- Disassembling the HML planetary gear carrier
- Gearbox input shaft
- Gearbox input shaft – Version with HML
- Primary shaft disassembly – Version with HML
- Secondary shaft disassembly – Version with HML
- Shimming Secondary Shaft Bearing – Assembly standard: 939177
- Gearbox assembly with HML
- Complete gearbox assembly – Version with HML
- HML unit assembly procedure – Assembly standard: 939177
- Assembling and adjusting gearbox
- Adjusting the range shaft
- Assembling the range selector assembly
- Range gearbox and Creeper gears
- Internal range reduction gear controls
- Disassembly of the internal range reduction gear controls
- Disassembling the gear selector lever
- Disassembling the supercreeper gear shaft
- Adjusting differential – bevel gear set
- Adjustment of pinion and crown wheel backlash
- Removing the rear pinion
- 4WD engagement device
- Disassembly of the 4WD engagement device
- Disassembly of dual traction output shaft
- Rear PTO control clutch
- Disassembly of the PTO clutch
- Pump drive PTO – external gear
- Pump drive PTO – internal gear
- PTO output shaft
- Disassembling the PTO output shaft – 4 speed version
- Disassembling the rear PTO output flange shaft
- Disassembling the ground speed PTO output flange shaft
- INPUT unit
- INPUT unit disassembly
- Hydrostatic unit
- Replacing the WORK and TRANSPORT clutch assemblies (with the intermediate casing installed)
- Disassembling the variator input gear unit
- WORK and TRANSPORT clutch-planetary reduction gearbox assembly
- REVERSE clutch-planetary reduction unit
- Speed range gear shafts
- Disassembling the PTO casing
- PTO drive shaft
- PTO driven shaft
- Differential pinion
- Disassembling the WORK and TRANSPORT clutches
E0 – Rear axle
- Bleeding the braking system
- Rear axle
- Removing right/left hand rear axle
- Brake flange
- Park Brake unit disassembly
- Removing rear differential
- Park brake unit
- Rear differential
F0 – Front axle
- Dual traction shaft (DT)
- Carrier with front axle
- Adjusting front carrier – engine alignment
- Steering bar/tie-rod
- Front axle
- Front axle adjusting endfloat
- Steering cylinders
- Removing steering cylinders
- Suspended axle pivot bracket
- Differential assembly
- Disassembly of the differential locking device
- Disassembling the differential assembly – pinion
- Adjusting differential preload and pinion-crown wheel backlash
- Pinion positioning and preload adjustment
- Planetary reduction gearbox
- Disassembly of the planetary reduction gearbox
- Steering knuckle casing and axle shaft
- Adjustment of steering knuckle casing and axle shaft
- Front axle brake discs
G0 – Bodywork – Cab – Platform
- Steering wheel
- Instrument cluster
- Instrument cluster
- A/C unit
- Engine hood and front hood panels
- Battery mount
- Cab
- Cab access steps
- Front mudguard
- Right hand console
- Left hand side cab trim
- Empty and charge the air conditioning system
- Air conditioning condenser
- Dehydrator filter
- Gear lever
- Gear lever Bowden cable
- Range shift lever
- Cab
- Mat
H0 – Hydraulic system
- Load Sensing (LS) ancillary pump
- Lubrication pump
- Disassembling the lubrication pump
- Disassembling the hydraulic pump drive unit
- Hydraulic steering pump (16 cc)
- Left hydraulic pump (32 cc)
- Right hydraulic pump (14 cc)
- Supplementary pump
- Hydrostatic steering (orbitrol)
- Rear auxiliary utility distributors and rear lift
- Suspended axle accumulator block
- HML valve unit
- Shuttle solenoid valves assembly
- Services solenoid valve assembly
- Brake logic block
- Front braking valve
- Trailer air braking valve and air tank
- Air tanks
- Testing operation of pneumatic trailer braking system (eTCV)
- Pneumatic trailer braking system (eTCV)
- Trailer braking electronic control unit (WABCO)
- Brake master cylinders
L0 – Electrical system
- Battery
- Engine control unit
- Fuse box
- Alternator
M0 – Front PTO
- Front PTO
N0 – Front lift
- Front top link
- Front lift
R0 – Rear lift
- Complete rear lift
- Disassembling the lift assembly (SAC)
- Lift cylinder
- Stabiliser tie-rod carrier
- Bushes
- Auxiliary lift cylinders
- 3-point linkage
S0 – Wheels
- Rear wheel
- Front Wheels
V0 – Ballast – towing hitches
- Rear tow hitch
Wiring diagrams
- W-TECH – ELECTRICAL SECTION
Components
- Locations of main control units
- SVCU Control Unit
- PFCU Control Unit
- MVCU Control unit
- Deutz Engine Control unit
- KF Engine Control Unit
- OCU Control Unit
- 2.8519.148.0 – ECU ISO 11786
- CTM/AM55 Control Unit
- A – Engine start and charging
- B – Fuses
- C – Grounds
- D – Intermediate connections
- E – On-board instruments
- F – External lights (rotating beacon)
- G – Interior lights
- H – Manual electrical controls (steering column stalk)
- I – Circuit breakers
- J – Relays
- K – Sensors and transmitters
- L – Electromagnets and solenoid valves
- M – Electrical/electronic devices, Flasher units and Timers
- N – Electric motors and actuators
- O – Resistors and rheostats
- P – Various services
- R – Diagnostics
Systems
- S001A – Electronic engine governor (125-135 HP DEUTZ engine)
- S001B – Electronic engine governor (115HP DEUTZ engine)
- S001C – Electronic engine governor (115HP KF engine)
- S001D – Electronic engine governor (125-135 HP KF engine)
- S002A – Preheat (115 HP DEUTZ engine)
- S002B – Preheat (115 HP KF engine)
- S 002 C – Preheat (125-135 HP DEUTZ engine)
- S002D – Preheat (125 -135 HP KF engine)
- S003A – Engine start (125-135 HP DEUTZ engine)
- S003B – Engine start (115 HP KF engine)
- S003C – Engine start (115 HP DEUTZ engine)
- S003D – Engine start (125 -135 HP KF engine)
- S004A – Lift (115 HP)
- S004B – Lift (125-135 HP)
- S005A – Road lights (115 HP)
- S005B – Road lights (125 -135HP)
- S006A – Work lights (115 HP)
- S006B – Work lights (125-135 HP)
- S007A – Wipers (115 HP)
- S007B – Wipers (125-135 HP)
- S008A – Instrument cluster (115 HP)
- S008B – Instrument cluster (125-135 HP)
- S009A – Radio system (115 HP)
- S009B – Radio system (125-135 HP)
- S010A – Air conditioning system (115 HP)
- S010B – Air conditioning system (125-135 HP)
- S011A – Transmission (115 HP)
- S011B – Transmission (125-135 HP)
- S012A – PTO (115 HP)
- S012B – PTO (125-135 HP)
- S013A – Accessories (115 HP)
- S013B – Accessories (125-135 HP)
- S014A – CAN network (115 HP KF engine)
- S014B – CAN network (125 -135 HP KF engine)
- S014C – CAN network (115 HP DEUTZ engine)
- S014D – CAN network (125 -135 HP DEUTZ engine)
- S 015 A – Engine CAN line (115 HP)
- S015B – Engine CAN line (115 HP)
- S016A – Braking system (115 HP)
- S016B – Braking system (125-135 HP)
- S017A – Trailer brake (115 HP)
- S017B – Trailer brake (125-135 HP)
- S018 – Eco Saving (115 HP)
- S019A – Emissions control (115 HP)
- S019B – Emissions control (125-135 HP)
- S019C – Emissions control (125-135 HP Deutz)
- S019D – Emissions control (115 HP D Deutz)
- S020A – Front loader (115 HP)
- S020B – Front loader (125 – 135 HP)
- S021A – SDD (115 HP)
- S021B – SDD (125 – 135 HP)
- S022A – Battery master switch (115 HP)
- S022B – Battery master switch (125 – 135 HP)
- S023A – Smart Lever (115 HP)
- S023B – Smart Lever (125 – 135 HP)
- S024A – Agrosky (115 HP)
- S024B – Agrosky (125 – 135 HP)
- S025 – Isobus
- S026A – Front axle and reverse shuttle (115 HP)
- S026B – Front axle and reverse shuttle (125 – 135 HP)
Wiring harnesses
- 0.011.3797.3 – SBA/ASM sensor
- 0.012.2756.3 – Front PTO solenoid valve
- 0.014.1567.4/20 – Front wiper motor – opening windscreen version
- 0.014.1645.4/10 – Pneumatic trailer braking pressure switch
- 0.014.1645.4/10 – Hydraulic trailer braking pressure switch wiring
- 0.014.8453.4 – Windscreen wiper (version with fixed windscreen)
- 0.016.1001.4/20 – Trailer parking brake solenoid valve (version with hydraulic braking)
- 0.016.8489.4 – Trailer parking brake solenoid valve (version with pneumatic braking)
- 0.017.0496.4/10 – H9 lower front work lights
- 0.017.8425.4/10 – Trailer socket, EU
- 0.018.5346.4 – Distributor 7-8
- 0.019.5702.4/10 – ISO 11786
- 0.019.8827.4 – SDD (rapid steer system)
- 0.020.9462.4/10 – Flashing beacon cable
- 0.021.0490.4/10 – ABS socket for trailer
- 0.021.1196.4/10 – Low work lights
- 0.021.4505.4 – PTO 540-750 wiring loom
- 0.021.5509.4 – Rear screen defrost adapter
- 0.023.1282.4/10 – Injectors (4 cylinder version)
- 0.024.8482.4/10 – Mechanically engaged front loader 1
- 0.024.8744.4 – Front suspension wiring loom
- 0.025.1281.4/10 – HML front loader lever
- 0.025.5561.4 – Front lights
- 0.026.1301.4 – Mechanically engaged front loader 2
- 0.026.4756.4 – Electrically adjustable and heated rear-view mirrors (LH side)
- 0.026.5702.4_10 – Fuel pre-filter pump
- 0.026.6049.4 – Cowl
- 0.026.6377.4 – SBA ASM WAS adapter
- 0.028.1207.4/20 – Pneumatic trailer braking system, Mother Regulation version (MR)
- 0.028.1208.4 – Ground wiring loom (AIR PREX)
- 0.029.7828.4 – Ground wiring loom (AIR PREX)
- 0.030.6478.4/10 – KF engine
- 0.030.6480.4/10 – Engine (4 cylinder version)
- 0.032.5469.4/10 – Glowplugs (4 cylinder version)
- 0.032.8553.4 – Provision for ISO 11783 socket
- 0.033.0899.4 – AGI2 antenna cable
- 0.033.8944.4/20 – LED TOP lights adapter
- 0.036.3073.4/10 – DPF sensor
- 0.036.4523.4 – NOx sensor
- 0.036.4581.4 – Under-cowl sensors
- 0.036.5978.4 – Right hand console (with electronic rear lift)
- 0.036.6318.4 – Hydraulic trailer braking (dual mode)
- 0.036.6400.4 – Hydraulic trailer braking pressure switch wiring
- 0.036.6401.4 – DM hydraulic trailer braking solenoid valve, Mother Regulation version (MR)
- 0.036.6533.4 – Roof
- 0.036.6567.4 – CTM antenna
- 0.036.6782.4 – H9 cab roof work lights
- 0.036.7358.4 – LED cab roof work lights
- 0.036.7414.4/10 – License plate light
- 0.036.7712.4 – DAB antenna
- 0.036.7766.4 – FM antenna
- 0.036.7926.4 – LED turn indicator adapter cable
- 0.036.9474.4 – Alternator – Preheat (3 cylinder version)
- 0.036.9659.4/20 – High power cab wiring loom, 125 and 135 HP
- 0.036.9660.4/10 – Roof PT454
- 0.036.9661.4 – ETHERNET
- 0.036.9664.4 – Agrosky SGR1 antenna PT454
- 0.036.9665.4/10 – AGI 2 antenna
- 0.036.9667.4 – CTM control unit PT 454
- 0.036.9669.4 – iMonitor X25
- 0.036.9670.4_10 – Centre ISOBUS wiring loom PT454
- 0.036.9671. 4_10 – SVCU control unit
- 0.036.9673.4/10 – Instrument cluster wiring loom
- 0.036.9676.4 – Pneumatic trailer braking, MR PT454
- 0.036.9677.4 – Rear braking adapter PT 454
- 0.036.9680.4 – High power rear wiring loom, 125 and 135 HP
- 0.036.9682. 4_10 – NOx sensor
- 0.036.9683.4 – Rear ISOBUS wiring loom PT454
- 0.036.9684.4 – Junction terminal board
- 0.036.9685.4 – Suspended front axle wiring loom
- 0.036.9686.4/10 – Front wiring loom
- 0.036.9687.4_10 – Front Engine ECU KF PT454
- 0.036.9688.4/10 – Deutz power cables
- 0.036.9689. 4_10 – Power cables KF PT 454
- 0.039.8802.4/10 – Cab low power wiring loom, 115 HP
- 0.039.9560.4 – Low power rear wiring loom, 115 HP
- 0.039.9705.4 – KF power cables
- 0.039.9795.4 – Deutz PS6110 power cables
- 0.040.0815.4/10 – Distributor 1_2_3_4 wiring loom
- 0.040.0867.4 – Hydraulic trailer braking, Non-MR PT454
- 0.040.1839.4 – Hydraulic trailer braking, MR PT454
- 0.040.2173.4 – Console PT 454
- 04422324.4/10 – ISO 11786 socket
Service Info
A0 – TRACTOR
- Diagnostics 2026 subscription
- After-sales 2026 subscription
- SERVICE NEWS RESEARCH GUIDE
- Diagnostics 2025 subscription
- After-sales 2025 subscription
- Diagnostics 2023 subscription
- Diagnostics 2024 subscription
- Diagnostics 2022 subscription
- Diagnostics 2021 subscription
- After-sales 2024 subscription
- After-sales 2023 subscription
- After-sales 2022 subscription
- After-sales 2021 subscription
B0 – ENGINE
- TURBOCHARGER VGT MALFUNCTION
C0 – ENGINE ACCESSORIES
- SERVICE NEWS – DEF Unit – Wrong level indication
- Diagnostic protocol – AdBlue – Float level unit
- Filter and prefilter tool p/n 5.9035.865.0
- SCR AREA DAMAGED SENSORS
D0 – TRANSMISSION
- HML gears and discs failures
- ENGINE STALLS WITH THE PTO ENGAGEMENT
F0 – FRONT AXLE
- Bevel gear set loosing screws
- Missing lubrification point of front axle
G0 – BODYWORK – CAB
- SERVICE NEWS – Brake Fluid Reservoir vent missing
- BRAKE PUMP INTERNAL LEAKAGE
- Air conditioning system recharging
- Interference between rear tyres and rear fenders screws
H0 – HYDRAULIC AND PNEUMATIC SYSTEM|
- SERVICE NEWS – Front suspension malfunction
- Hydraulic CUNA trailer braking kit (ITALY)
- Single connection hydraulic braking kit availability update – only for EUROPEAN market
- 4WD BLINKING LIGHT
- Leakage from power beyond pipe fitting 6C PS-TTV-RVSHIFT Stage 5 (PT454)
- Leakage from brake valve and distributor pipe
L0 – ELECTRIC AL SYSTEM
- SERVICE NEWS – M334-M335-M430-M28-M427 New Engine SW release A09 (FarMotion Stage 5)
- FAS SENSOR BRACKET BENT
- MAF sensor malfunction on VGT FarMotion engine Error code SPN 132 FMI15 (M28)
- PRESSURE SWITCH ON TRAILER BRAKE VALVE “CUNA”
- SerDia4.0
- iMonitor x35 malfunctioning
- GO-ANYWHERE DIAGNOSTICS
- Bad visualizazion of wiring diagram on technical documentaion
- iMonitor SW upgrade & iMonitor UBOOT update instruction
- Regeneration start issue
- M709-520375 FMI15 error code on TCD 3.6 Stage 5 (6C, 6C TTV, 6C RVSHIFT stage 5)
- M83 error code on TCD 3.6 Stage 5 (6C, 6C TTV, 6C RVSHIFT stage 5)
- Error Code M28 – FARMotion KF engine series
- Lost connection diagnostic tools
- PTO switch not working
V1 – AFTERMARKET KITS
- SERVICE NEWS – Antenna Predisposition
- Check correct installation of braking KIT
- Instructions for kit aftersales
