Document overview
Workshop Manual for SAME DIAMOND 270 DCR → WSXJ370200LS10001 from the DIAMOND family. Digital PDF in English with 1,821 pages.
The corresponding English table of contents contains 52 sections and 665 individual topics.
Main sections included
- Introduction
- Safety
- Technical characteristics
- Calibrations and electronic diagnosis
- Method of intervention
- Wiring diagrams
- Service Info
Document details
- Brand: SAME
- Family: DIAMOND
- Model: DIAMOND 270 DCR
- Starting serial number: WSXJ370200LS10001
- Document type: Workshop Manual
- Language: English
- Pages: 1,821
- File size: 228.30 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that your machine model and reference code match SAME DIAMOND 270 DCR → WSXJ370200LS10001.
Complete table of contents
Introduction
- Tightening Torques
- Units of measurement and conversion factors
Safety
Preface
- Important notes concerning safety
Important safety information
- Recognising hazards
- Indications for persons in contact with the tractor
Safety rules
- Risks during tractor preparation
- Risks during maintenance
- Work on machine systems
- Special disassembly/assembly/inspection procedures
Safety pictograms
- Replacing safety pictograms
Environmental risks
- Hazards associated with the operating environment
Technical characteristics
Engine
- Technical data
Transmission
- Transmission
- Rear PTO
Rear axle
- Rear axle
Front axle
- Front axle
Hydraulic system
- Hydraulic system
- Variable displacement pump
- Hydraulic pump
- Steering gear pump
- Load sensing valve, pressure cut-off valve
- Priority valve
- Power steering
- Pressure relief valve
- Hydraulic front axle suspension
- Remote control valve
- Braking system
- Hydraulic trailer braking system – Italy version
- Hydraulic trailer braking system – Export version
- Air trailer braking system – Italy version
- Air trailer braking system – Export version
- Compressor, Pressure reducing valve, Cab suspension valve
- Trailer air braking valve (2-way)
- Trailer air braking valve (1-way)
- Pilot solenoid valve for 1-way trailer air braking valve
Calibrations and electronic diagnosis
Diagnostic tools
- SDF Analyser
- SDF Analyser – Diagnostic socket connection
- SERDIA 2000 level III” software
- Serdia
- SERDIA – Diagnostic socket connection
Diagnostic tool screens
- ECU interrogation
- Electronic system
- CAN BUS system
- Engine control unit – Deutz EMR3
- HLHP Control unit
- Transmission control unit
- Instrument panel
Commissioning and calibrating the tractor
- Introduction to commissioning the tractor
- Renewal of the engine control unit – Introduction
- Renewal of the engine control unit – Reading and saving DATASET
- Renewal of the engine control unit – Programming the control unit with DATASET
- HLHP control unit – Calibration of the accelerator pedal
- HLHP control unit – Calibration of the hand throttle lever
- Renewal of the transmission control unit – Introduction
- Renewal of the transmission control unit – Transmission type configuration
- Renewal of the transmission control unit – Tyres type configuration
- Renewal of the transmission control unit – Configuration of the wheel circumference (using the ART)
- Renewal of the transmission control unit – Configuration of the wheel circumference (without using the ART)
- Renewal of the transmission control unit – Configuration of the maximum travel speed
- Renewal of the transmission control unit – Calibration of the clutch pedal
- Renewal of the transmission control unit – Calibration of the main clutch
- Renewal of the HLHP control unit – Introduction
- Renewal of the HLHP control unit – Initialization of the HLHP control unit
- Renewal of the HLHP control unit – Configuration of the tractor model
- Renewal of the HLHP control unit – Configure the system for presence of front PTO
- Renewal of the HLHP control unit – SBA / ASM system enable
- Renewal of the HLHP control unit – Calibration the steering angle sensor
- Renewal of the HLHP control unit – Configuration for presence of the RADAR
- Renewal of the HLHP control unit – Calibrating low and high positions of the lift
- Renewal of the HLHP control unit – Front axle suspension system enable
- Renewal of the HLHP control unit – Setting the instrument control panel display language
- Renewal of the HLHP control unit – Configuring the quantity of auxiliary services
- Renewal of the HLHP control unit – Rear control valves identification
- Renewal of the HLHP control unit – Configuration for presence of the front lift
- Renewal of the armrest control unit – Introduction
- Renewal of the armrest control unit – Calibration of control valves n°3 and n°4 joystick
- Cancellation of all alarms
ECU alarms
- ECU Alarm list
- Alarms – List of semiactive cab alarms (MR-D)
Engine alarms
- Engine ECU alarms – ART code SPN 29
- Engine ECU alarms – ART code SPN 91
- Engine ECU alarms – ART code SPN 94
- Engine ECU alarms – ART code SPN 97
- Engine ECU alarms – ART code SPN 100
- Engine ECU alarms – ART code SPN 102
- Engine ECU alarms – ART code SPN 105
- Engine ECU alarms – ART code SPN 108
- Engine ECU alarms – ART code SPN 110
- Engine ECU alarms – ART code SPN 157
- Engine ECU alarms – ART code SPN 158
- Engine ECU alarms – ART code SPN 168
- Engine ECU alarms – ART code SPN 190
- Engine ECU alarms – ART code SPN 563
- Engine ECU alarms – ART code SPN 630
- Engine ECU alarms – ART code SPN 639
- Engine ECU alarms – ART code SPN 651
- Engine ECU alarms – ART code SPN 652
- Engine ECU alarms – ART code SPN 653
- Engine ECU alarms – ART code SPN 654
- Engine ECU alarms – ART code SPN 655
- Engine ECU alarms – ART code SPN 656
- Engine ECU alarms – ART code SPN 676
- Engine ECU alarms – ART code SPN 677
- Engine ECU alarms – ART code SPN 729
- Engine ECU alarms – ART code SPN 898
- Engine ECU alarms – ART code SPN 1079
- Engine ECU alarms – ART code SPN 1080
- Engine ECU alarms – ART code SPN 1235
- Engine ECU alarms – ART code SPN 2634
- Engine ECU alarms – ART code SPN 2791
- Engine ECU alarms – ART code SPN 523240
- Engine ECU alarms – ART code SPN 523350
- Engine ECU alarms – ART code SPN 523351
- Engine ECU alarms – ART code SPN 523352
- Engine ECU alarms – ART code SPN 523353
- Engine ECU alarms – ART code SPN 523354
- Engine ECU alarms – ART code SPN 523355
- Engine ECU alarms – ART code SPN 523420
- Engine ECU alarms – ART code SPN 523470
- Engine ECU alarms – ART code SPN 523490
- Engine ECU alarms – ART code SPN 523550
- Engine ECU alarms – ART code SPN 523600
- Engine ECU alarms – ART code SPN 523601
- Engine ECU alarms – ART code SPN 523612
- Engine ECU alarms – ART code SPN 523613
- Engine ECU alarms – ART code SPN 523615
- Engine ECU alarms – ART code SPN 523617
Transmission alarms
- Transmission control unit alarms – Introduction
- Transmission control unit alarms – ART code 10
- Transmission control unit alarms – ART code 11
- Transmission control unit alarms – ART code 12
- Transmission control unit alarms – ART code 13
- Transmission control unit alarms – ART code 14
- Transmission control unit alarms – ART code 18
- Transmission control unit alarms – ART code 21
- Transmission control unit alarms – ART code 22
- Transmission control unit alarms – ART code 23
- Transmission control unit alarms – ART code 24
- Transmission control unit alarms – ART code 25
- Transmission control unit alarms – ART code 27
- Transmission control unit alarms – ART code 28
- Transmission control unit alarms – ART code 29
- Transmission control unit alarms – ART code 30
- Transmission control unit alarms – ART code 31
- Transmission control unit alarms – ART code 32
- Transmission control unit alarms – ART code 34
- Transmission control unit alarms – ART code 33
- Transmission control unit alarms – ART code 35
- Transmission control unit alarms – ART code 36
- Transmission control unit alarms – ART code 37
- Transmission control unit alarms – ART code 38
- Transmission control unit alarms – ART code 39
- Transmission control unit alarms – ART code 40
- Transmission control unit alarms – ART code 41
- Transmission control unit alarms – ART code 47
- Transmission control unit alarms – ART code 48
- Transmission control unit alarms – ART code 50
- Transmission control unit alarms – ART code 51
- Transmission control unit alarms – ART code 52
- Transmission control unit alarms – ART code 53
- Transmission control unit alarms – ART code 54
- Transmission control unit alarms – ART code 55
- Transmission control unit alarms – ART code 64
- Transmission control unit alarms – ART code 65
- Transmission control unit alarms – ART code 66
- Transmission control unit alarms – ART code 67
- Transmission control unit alarms – ART code 68
- Transmission control unit alarms – ART code 69
- Transmission control unit alarms – ART code 70
- Transmission control unit alarms – ART code 73
- Transmission control unit alarms – ART code 74
- Transmission control unit alarms – ART code 76
- Transmission control unit alarms – ART code 77
- Transmission control unit alarms – ART code 79
- Transmission control unit alarms – ART code 80
- Transmission control unit alarms – ART code 82
- Transmission control unit alarms – ART code 83
- Transmission control unit alarms – ART code 85
- Transmission control unit alarms – ART code 87
- Transmission control unit alarms – ART code 89
- Transmission control unit alarms – ART code 90
- Transmission control unit alarms – ART code 91
- Transmission control unit alarms – ART code 92
- Transmission control unit alarms – ART code 93
- Transmission control unit alarms – ART code 94
- Transmission control unit alarms – ART code 95
- Transmission control unit alarms – ART code 96
- Transmission control unit alarms – ART code 97
- Transmission control unit alarms – ART code 98
- Transmission control unit alarms – ART code 99
- Transmission control unit alarms – ART code 4B
- Transmission control unit alarms – ART code B0
- Transmission control unit alarms – ART code B1
- Transmission control unit alarms – ART code B2
- Transmission control unit alarms – ART code C0
- Transmission control unit alarms – ART code C1
- Transmission control unit alarms – ART code C3
- Transmission control unit alarms – ART code C6
- Transmission control unit alarms – ART code C9
- Transmission control unit alarms – ART code CB
- Transmission control unit alarms – ART code CF
- Transmission control unit alarms – ART code D0
- Transmission control unit alarms – ART code D1
- Transmission control unit alarms – ART code D2
- Transmission control unit alarms – ART code D3
- “EE” message shown on the transmission display
- Failure to connect EDS software to the transmission control unit
- Sudden transmission transition to the neutral position from F/R gear
- Continuous transmission range change
- Momentary loss of traction with the tractor in motion
- The transmission remains in Neutral
Armrest alarms
- Armrest alarms – ART code HLHP SPN 634
- Armrest alarms – ART code HLHP SPN 635
- Armrest alarms – ART code HLHP SPN 636
- Armrest alarms – ART code HLHP SPN 637
- Armrest alarms – ART code HLHP SPN 638
- Armrest alarms – ART code HLHP SPN 639
- Armrest alarms – ART code HLHP SPN 640
- Armrest alarms – ART code HLHP SPN 641
- Armrest alarms – ART code HLHP SPN 642
- Armrest alarms – ART code HLHP SPN 644
- Armrest alarms – ART code HLHP SPN 645
- Armrest alarms – ART code HLHP SPN 646
- Armrest alarms – ART code HLHP SPN 647
- Armrest alarms – ART code HLHP SPN 648
- Armrest alarms – ART code HLHP SPN 649
- Armrest alarms – ART code HLHP SPN 650
- Armrest alarms – ART code HLHP SPN 651
- Armrest alarms – ART code HLHP SPN 652
- Armrest alarms – ART code HLHP SPN 657
- Armrest alarms – ART code HLHP SPN 696
HLHP alarms
- HLHP control unit alarms – ART code HLHP SPN 51
- HLHP control unit alarms – ART code HLHP SPN 63
- HLHP control unit alarms – ART code HLHP SPN 158
- HLHP control unit alarms – ART code HLHP SPN 531
- HLHP control unit alarms – ART code HLHP SPN 540
- HLHP control unit alarms – ART code HLHP SPN 541
- HLHP control unit alarms – ART code HLHP SPN 550
- HLHP control unit alarms – ART code HLHP SPN 551
- HLHP control unit alarms – ART code HLHP SPN 552
- HLHP control unit alarms – ART code HLHP SPN 561
- HLHP control unit alarms – ART code HLHP SPN 601
- HLHP control unit alarms – ART code HLHP SPN 602
- HLHP control unit alarms – ART code HLHP SPN 603
- HLHP control unit alarms – ART code HLHP SPN 620
- HLHP control unit alarms – ART code HLHP SPN 621
- HLHP control unit alarms – ART code HLHP SPN 622
- HLHP control unit alarms – ART code HLHP SPN 631
- HLHP control unit alarms – ART code HLHP SPN 632
- HLHP control unit alarms – ART code HLHP SPN 633
- HLHP control unit alarms – ART code HLHP SPN 653
- HLHP control unit alarms – ART code HLHP SPN 654
- HLHP control unit alarms – ART code HLHP SPN 655
- HLHP control unit alarms – ART code HLHP SPN 656
- HLHP control unit alarms – ART code HLHP SPN 660
- HLHP control unit alarms – ART code HLHP SPN 661
- HLHP control unit alarms – ART code HLHP SPN 662
- HLHP control unit alarms – ART code HLHP SPN 664
- HLHP control unit alarms – ART code HLHP SPN 689
- HLHP control unit alarms – ART code HLHP SPN 694
- HLHP control unit alarms – ART code HLHP SPN 695
- HLHP control unit alarms – ART code HLHP SPN 700
- HLHP control unit alarms – ART code HLHP SPN 701
Canbus alarms
- CANBUS alarms – introduction
- CANBUS alarms – alarms table
- CANBUS alarms – Case 1
- CANBUS alarms – Case 2
- CANBUS alarms – Case 3
- CANBUS alarms – Case 4
- CANBUS alarms – Case 5
- CANBUS alarms – Case 6
- CANBUS alarms – Case 7
- CANBUS alarms – Case 8
- CANBUS alarms – Case 9
Electrohydraulic control valve alarms
- CANBUS Control valves control unit alarms – ART code HLHP 11
- CANBUS Control valves control unit alarms – ART code HLHP 12
- CANBUS Control valves control unit alarms – ART code HLHP 13
- CANBUS Control valves control unit alarms – ART code HLHP 14
- CANBUS Control valves control unit alarms – ART code HLHP 15
- CANBUS Control valves control unit alarms – ART code HLHP 16
- CANBUS Control valves control unit alarms – ART code HLHP 17
- CANBUS Control valves control unit alarms – ART code HLHP 21
- CANBUS Control valves control unit alarms – ART code HLHP 22
- CANBUS Control valves control unit alarms – ART code HLHP 23
- CANBUS Control valves control unit alarms – ART code HLHP 24
- CANBUS Control valves control unit alarms – ART code HLHP 25
- CANBUS Control valves control unit alarms – ART code HLHP 26
- CANBUS Control valves control unit alarms – ART code HLHP 31
- CANBUS Control valves control unit alarms – ART code HLHP 32
- CANBUS Control valves control unit alarms – ART code HLHP 41
- CANBUS Control valves control unit alarms – ART code HLHP 42
- CANBUS Control valves control unit alarms – ART code HLHP 43
- CANBUS Control valves control unit alarms – ART code HLHP 81
- CANBUS Control valves control unit alarms – ART code HLHP 82
- CANBUS Control valves control unit alarms – ART code HLHP 83
- CANBUS Control valves control unit alarms – ART code HLHP ??
- CANBUS Control valves control unit alarms – ART code HLHP FF
Method of intervention
B0 – Engine
- Engine – Separation from the transmission
- Engine
- Checking the compression pressure
- Removing and installing the crankcase bleeding
- Dismantling and assembling the crankcase breather
- Removing and installing the front cover (opposite side to flywheel)
- Removing and installing the lubricating oil pan (heavy duty version)
- Removing and installing the crankshaft
- Checking the axial clearance of the crankshaft
- Removing and installing torsional vibration damper
- Checking the crankshaft
- Alternator, fuel pump, water pump and fan drivebelt
- Flywheel
- Removing and installing the flywheel
- Fluid coupling and flywheel
- Air conditioning compressor drivebelt
- Air conditioning compressor belt – Tension adjustment
- Renewing the crankshaft sealing ring (flywheel side)
- Renewing the crankshaft sealing ring (opposite side to flywheel)
- Removing and installing the piston and con rod
- Checking piston overhang
- Checking the piston
- Removing and installing the cylinder liner
- Checking the overhang of the cylinder liner
- Testing the cylinder liner
- Checking the piston rings and piston ring grooves
- Removing and installing the camshaft
- Checking the camshaft
- Removing and installing the connection housing
- Removing and installing the gearcase
- Removing and installing the valves
- Checking and setting the valve clearance
- Checking the valves
- Checking the valve lag
- Checking the valve guide
- Removing and installing the valve control
- Removing and installing cylinder head
- Removing and installing the oil cooler housing
- Removing and installing the oil cooler
- Removing and installing the control block
- Removing and installing the fuel pressure sensor
- Removing and installing the high-pressure pump (Installation position A)
- Removing and installing the high-pressure pump (Installation position B)
- Removing and installing the injector
- Removing and installing the pressure limiting valve
- Removing and installing the rail
- Removing and installing the coolant pump
- Removing and installing the cooler (exhaust gas recirculation)
- Removing and installing the flutter valve (exhaust gas recirculation)
- Removing and installing the actuator (exhaust gas recirculation)
- Checking radiator cleanliness
- Remove and install the charge air line
- Removing and installing the exhaust line
- Removing and installing the shutoff valve (exhaust gas recirculation)
- Removing and installing the turbocharger
C0 – Engine accessories
- Changing the coolant and flushing the circuit
- Engine cooling system radiator
- Expansion tank
- Fan
- Radiator, coolers – Complete assembly
- Air cleaner – complete assembly
- Intercooler, gearbox oil and fuel coolers
- Left-hand fuel tank
- Right-hand fuel tank
- Removing and installing the fuel supply pump
- Remove and install the heating flange
- Starter motor
- Intermediate manifold
- Exhaust head pipe
- Exhaust silencer
- Removing and installing the air conditioning compressor
- Removing and installing the pressure/temperature sensor (charge air)
- Removing and installing temperature transmitter
- Removing and installing the thermostat housing
- Removing and installing the thermostat
- Removing and installing the generator (operating side)
- Removing and installing the generator (outlet side)
- Removing and installing the impulse transmitter (camshaft)
- Removing and installing the impulse transmitter (crankshaft)
- Removing and installing the oil pressure switch
- Removing and installing the rail pressure sensor
- Removing and installing the starter
D0 – Transmission
- Checking the transmission oil level
- Changing the transmission oil
- Changing the transmission and rear axle oil filter
- Clutch housing
- Flexible coupling and flywheel
- 4WD output shaft
- Disassembly and reassembly of the Single Speed P.T.O.
- Disassembly and reassembly of the dual speed P.T.O.
- Disassembly and reassembly of Solenoid Valves
- Disassembly and reassembly of the remote control
- Rear axle gear box detachment and attachment
- Pump control unit
- Powershift clutches
- Powershift clutch – A/C clutch disassembly
- Powershift clutch – B/D clutch disassembly
- Powershift clutch – F/G clutch disassembly
- Front wheel drive shaft
- Creeper gear control
- Main clutch
- Mechanical gear engagement control
- Main shaft
- Secondary shaft
- Gearbox pre-assembly
- Gearbox cover
- Clutch axial clearance adjustment
- Adjustment of creeper gear control engagement limit.
- Separate and Mounting transmission from the Rear Axle
- Disassembly and reassembly of the Output
- Disassembly and reassembly of the Brake Actuation
- Disassembly and reassembly of the RH Brake
- Disassembly and reassembly of the LH Brake
- Disassembly and reassembly of the Differential
- Disassembly and reassembly of Oil Supply
- Electro-hydraulic shift control module
- Control pump gear
- Gearbox pump fixture
- Disassembly and reassembly of the Power Lift
E0 – Rear axle
- Disconnection of the rear axle gearbox
- Disassembling the PTO shaft
- Disassembling the output unit
- Disassembling the oil feed unit
- Disassembling the brake actuator unit
- Disassembling the right brake
- Disassembling the left brake
- Disassembling the differential (limited sliding)
- Disassembling the solenoid valves
- Disassembling the hitch
- Reassembling the differential (limited sliding)
- Reassembling the oil feed unit
- Reassembling the solenoid valves
- Reassembling the left brake
- Reassembling the right brake
- Reassembling the brake actuator unit
- Reassembling the output unit
- Reassembling the PTO shaft
- Reassembly of the PTO shaft clutch
- Reassembling the hitch
- Fitting the gearbox on the rear axle
- Disassembling the remote control
- Reassembling the remote control
F0 – Front axle
- Troubleshooting
- Front support – Version without front axle suspension
- Toe-in – steering angle and post-assembly checks
- Front axle and front support – Version without front axle suspension
- Front axle – Version without front axle suspension
- Steering cylinders assembly
- Axle shaft assembly
- Checking the bevel gear pair
- Differential carrier assembly
- Differential disassembly
- Propeller shaft – Front axle drive shaft
- Flange assembly
- Axle pivot bearings assembly
- Bevel pinion assembly
- Planetary reduction gear assembly
- Wheel hub assembly
G0 – Bodywork – Cab – Platform
- Cab – Complete assembly
- Hood and side panels
- Tank-battery support
- Engine hood support
- Cab access steps
- Cab air spring
- Hydraulic damper
- Front fenders
- Cab door lock – cable
- Right-hand console
- Left-hand console
- Instrument panel
- Lower instrument panel
- Seat and multifunction armrest
- Air conditioning control panel
- Air conditioning system
- Air conditioning compressor
- Condenser
- Receiver-dryer
- Air conditioning evaporator
- Heating system shut-off valve
- Heater matrix
- Air conditioner RH fan
- Air conditioner LH fan
- Trailer braking air pressure gauge
- Brake master cylinders
- Parking brake tie rod
- Parking brake tie rod – Initial and final adjustment
- Steering wheel, steering column switch unit, instrument panel
- Main gear lever – control cables
- Creeper gear lever – control cable
H0 – Hydraulic system
- Power steering pump – Version with compressed air
- Hydraulic services oil tank
- Load Sensing variable displacement pump
- “Load Sensing” variable displacement pump – Adjustment
- Priority valve
- Power steering valve – Complete assembly
- Power steering – Complete assembly – Checks and calibration
- Power steering valve – Complete assembly – Disassembly and assembly
- Front axle suspension cylinders
- Front lift locking shut-off valve
- Braking circuit
- Quick-couplers for air trailer braking – (Export version)
- Quick-coupler for trailer air braking – Italy version
- 1-way trailer air braking valve – Export D version
- 2-way trailer air braking valve
- Air reservoir for air braking
- Pressure control valve for the cab suspension
- Compressed air circuit supply pressure control valve
- Control solenoid valve for 1-way trailer air braking valve
L0 – Electrical system
- Battery
- Engine control unit
- Parking brake switch
- Clutch pedal potentiometer
- Clutch pedal potentiometer
- Accelerator potentiometer
- Brake lights switches
- Electronic lift controls
- Steering position sensor assembly
- Transmission operating status display
- Armrest controls
- Shuttle control selector
- Control buttons – RH console
M0 – Front PTO
- Front PTO – Complete assembly
- Front PTO flexible coupling
N0 – Front lift
- Front lift – Complete assembly
- Cylinder
R0 – Rear lift
- Lift cylinders
- Lift arms
- Draft sensor
- Position sensor
S0 – Wheels
- Front wheels
- Rear wheels
V0 – Ballast – towing hitches
- Support and towing hitch
- Remote control towing hitch cable
V1 – AFTERMARKET KITS
- Installation of the air conditioning kit
- Installing supplementary fuse box kit
Wiring diagrams
Introduction
- Structure of the unit
- Wiring and components index
- Basic electronics for mechanics (1/2)
- Basic electronics for mechanics (2/2)
- Electrical and electronic components (1/2)
- Electrical and electronic components (2/2)
Components
- Components
Systems
- Earthing points
- Starting
- Preheating
- Electronic engine control
- Diagnostics
- Instrument panel
- Worklights
- Worklights – Version with front lift
- Air conditioning
- Radio
- Lights – Version without front lift
- Lights – Version with front lift
- Wipers
- PTO
- Transmission
- CANBUS
- Accessories
- Control Valves
- Brakes
- Trailer brakes – Version with air braking
- Trailer brakes – Version with hydraulic braking
- Front axle suspension
- Lift
Wiring harnesses
- Battery negative lead – 0.012.4029.4/20
- Battery negative wiring connector positions
- Battery positive lead – 0442.2156/20
- Battery positive wiring connector positions
- Power supply wiring – 0.015.0765.4/20
- Power supply wiring connector positions
- Engine hood wiring loom – 0.015.3369.4
- Engine hood wiring connector positions
- Front axle suspension wiring loom – 0.015.3974.4/10
- Engine wiring – 0421.3623 – 0421.5274
- Lights selector switch wiring loom – 0443.8656
- Lights selector switch wiring loom connector positions
- ISO 11786 Wiring loom – 0.014.9570.4
- RH transmission line wiring loom – 0.015.0755.4/20
- RH transmission wiring connector positions
- LH transmission line wiring loom – 0.015.0746.4/10
- LH transmission wiring connector positions
- Lateral instrument panel wiring loom – 0.015.0740.4/20
- Lateral instrument panel wiring connector positions
- Front instrument panel wiring loom – 0.015.0712.4/10
- Front instrument panel wiring loom connector positions
- Braking and front lift interface wiring loom – 0.015.7461.4/10
- Braking and front lift interface connector positions
- Fender wiring loom – 0.015.3692.4
- Position of fenders wiring loom connectors
- Directional control valves wiring loom – 0.014.1612.4/20
- Control valves wiring loom connector positions
- Roof wiring loom – 0.015.0713.4/10
- Roof line wiring connector positions
- Air conditioning system wiring loom – 0.900.0783.8
- Air conditioning wiring loom connector positions
- Lower front worklights wiring loom on cab – Version without front lift – 0442.5602
- Connector positions of lower front worklights wiring loom on tractor cab – version without front lift
- Headlamps test lead wiring loom – 0.013.4085.4/20
- Headlamps test lead wiring connector positions
- Cab roof front and rear worklights wiring loom – RH side – 0443.7856
- Connector positions of front and rear worklights wiring loom on cab roof – RH side
- Cab roof front and rear worklights wiring loom – LH side – 0443.7857
- Connector positions of front and rear worklights wiring loom on cab roof – LH side
- Windscreen wiper motor wiring loom – 0441.2045
- Windscreen wiper motor connector positions wiring
- Cab lower headlights wiring loom – 0441.1923.4
- Connector positions of lower front lights wiring loom on cab
- Sidelights and front direction indicators wiring loom – 0442.8092.4
- Sidelights and front direction indicators wiring loom connector positions
- Worklights control relay wiring loom – 0.015.3730.4
- Worklights relay connector positions
- Number plate light wiring loom – 0.012.2018.4/20
- Number plate light wiring loom connector positions
- Rotating beacon extension wiring loom – 0.012.4108.4
- Rotary beacon extension wiring loom connector positions
- Rotating beacon wiring loom – 0443.6707
- Position of rotary beacon wiring connectors
- Trailer air braking wiring loom – 0443.6174/20
- Trailer air braking wiring loom connector positions
- Front lift control wiring loom on drivetrain – 0.015.5429.4/20
- Comfort package wiring loom – 0.015.5452.4
- Cab comfort package connectors position
- Wiring for hydraulic trailer braking – Italy version – 0.012.6404.4/20
- Agrosky wiring loom – 0.014.4992.4/10
- 0.016.0234.4/30 – Semi-active cab suspension
Service Info
A0 – TRACTOR
- Diagnostics 2026 subscription
- After-sales 2026 subscription
- SERVICE NEWS RESEARCH GUIDE
- Diagnostics 2025 subscription
- After-sales 2025 subscription
- Diagnostics 2023 subscription
- Diagnostics 2024 subscription
- Diagnostics 2022 subscription
- Diagnostics 2021 subscription
- Technical Documentation DVD 06/2009
- Technical Documentation DVD 07/2008
- Nameplate
- SDF LUBRICANTS: Lubricant oils and coolant fluids
- After-sales 2024 subscription
- After-sales 2023 subscription
- After-sales 2022 subscription
- After-sales 2021 subscription
- After-sales 2019 subscription
- SDF Parts and SDF Service DVV 04/2014, version 26
- Technical Documentation DVD 03/2010
- New function: Download PDF manuals
- Diagnostics – 2020 subscription
- After-sales – 2020 subscription
- After-sales – 2018 subscription
- Service and Spare Parts – 2017 Subscription
- SDF Parts and SDF Service DVDs 05/2014 version 25
- SDF Parts and SDF Service DVDs 03/2013 version 24
B0 – ENGINE
- Exhaust manifold fastener screws
- Flushing the lubrication circuit
- Deutz AG engine oil specifications
- SerDia 2010 updating license file
C0 – ENGINE ACCESSORIES
- Diagnostic protocol – AdBlue – Float level unit
- Filter and prefilter tool p/n 5.9035.865.0
- Additive for diesel fuel
F0 – FRONT AXLE
- Check the front axle steering knuckles for wear
- Steering behavior check procedure
- C907 2014 – Steering track rod ends
G0 – BODYWORK – CAB
- Air conditioning system filter-drier
- Air conditioning system recharging
H0 – HYDRAULIC AND PNEUMATIC SYSTEM|
- Hydraulic CUNA trailer braking kit (ITALY)
- Single connection hydraulic braking kit availability update – only for EUROPEAN market
- Trasmissione comando pompe idrauliche
- L0 – ELECTRIC AL SYSTEM
