Document overview
Workshop Manual for SAME ARGON³ 75 P → ZKDL760200RS05001 from the ARGON³ (STAGE 3A) family. Digital PDF in English with 515 pages.
The corresponding English table of contents contains 41 sections and 158 individual topics.
Main sections included
- Introduction
- Safety
- Technical characteristics
- Calibrations and electronic diagnosis
- Method of intervention
- Wiring diagrams
- Service Info
Document details
- Brand: SAME
- Family: ARGON³ (STAGE 3A)
- Model: ARGON³ 75 P
- Starting serial number: ZKDL760200RS05001
- Document type: Workshop Manual
- Language: English
- Pages: 515
- File size: 97.77 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that your machine model and reference code match SAME ARGON³ 75 P → ZKDL760200RS05001.
Complete table of contents
Introduction
- Tightening torques
- Units of measurement and conversion factors
Safety
Preface
- Important notes concerning safety
Important safety information
- Recognising hazards
- Indications for persons in contact with the tractor
Safety rules
- Risks during tractor preparation
- Risks during maintenance
- Work on machine systems
- Special disassembly/assembly/inspection procedures
Safety pictograms
- Replacing safety pictograms
Environmental risks
- Hazards associated with the operating environment
Technical characteristics
Engine
- Engine block technical data
- Crankshaft technical data
- Technical data for pistons – Piston rings
- Connecting rod technical data
- Camshaft technical data – static advance of 12°
- Timing gears technical data
- Technical data and dimensions of valves – valve springs
- Technical data and dimensions of cylinder heads – valve guide – valve seats
- Technical data and dimensions of rocker arms – rocker shafts – tappets
- Engine injectors technical data
- Hydraulic tappets diagram
Engine accessories
- Starter motor
Transmission
- Transmission
- Rear PTO
Rear axle
- Rear axle
- Rear differential assembly
Front axle
- Final drive
- Pinion and Differential
Hydraulic system
- Optional hydraulic circuit (4WD)
- Fully optional hydraulic circuit (4WD)
- 4-way remote control valve
- 6-way auxiliary control valve
- LH 8 cc hydraulic pump
- RH 19 cc hydraulic pump
- 4WD steering control valve
Rear lift
- Mechanical lift spool valve
- Hydraulic lift remote control valve operation Rear
Calibrations and electronic diagnosis
Diagnostic tools
SDF Analyser
- SDF Analyser
Diagnostic tool screens
- Operator seated sensor ECU (p/n 2.8519.106.0)
ECU alarms
Engine alarms
- Alarms – Preheating control unit alarms list
- Alarms – Display
Method of intervention
B0 – Engine
- Preliminary disassembly operations
- Checking engine block
- Crankshaft
- Crankshaft checks
- Flywheel checks
- Renewal of crankshaft rear oil seal
- Pistons and cylinder liners
- Pistons and rings check
- Cylinder liners check
- Check connecting rods – gudgeon pins – rod cap screws
- Camshaft checks
- Camshaft
- Valve timing
- Timing gear checks
- Adjusting timing gears backlash
- Counter-rotating weight checks
- Overhaul of counter-rotating weights assembly
- Valves check
- Valve seats check
- Valves sealing check
- Adjusting valve clearance
- Adjusting valve clearance
- Valve guides check and replacement
- Inspecting the rocker arms and rocker shafts
- Cylinder heads
- Determining correct head gasket thickness
- Valve springs check
- Heat exchanger removal
- Lubrication pump
- Lubrication pump disassembly
- Lubrication pump disassembly
- Oil sump
- INJECTION PUMPS, GOVERNOR AND FUEL SUPPLY
- Synchronising injection pumps
- Injectors assembly
- Checking injectors protrusion – Renewal of copper bushes
- Injectors check
- Injection pump control rod
- Overhaul of the mechanical governor (standard and with LDA valve)
- Electronic governor adjustment
- Installation of electronic governor support
- Engine coolant pump
- Engine coolant pump
- Thermostatic valve
- Checking the thermostat valve
- Cooling and intake ducts
- Final engine checks
D0 – Transmission
- Shimming of Gears
- Fitting the PTO engagement fork
- Conical screw assembly
- Adjusting endfloat of the secondary shaft gears
E0 – Rear axle
- Correct assembly of differential pins
- Adjusting the bevel gear set and the rear differential
F0 – Front axle
- Adjustment of Differential Lock
- Wheel hub bearing shims
G0 – Bodywork – Cab – Platform
- Fixing the steering wheel
- Installation of the PTO switch
H0 – Hydraulic system
- Pump tightening torques
- Solenoid valves and cartridge valves
Wiring diagrams
Introduction
- Introduction
- Basic electronics for mechanics (1/2)
- Basic electronics for mechanics (2/2)
- Electrical and electronic components (1/2)
- Electrical and electronic components (2/2)
Components
- Components list
Systems
- S001 – Starting and Preheating (Europe Market)
- S002 – Starting and Preheating (USA Market)
- S003 – Instrument panel and Lights (Europe Market)
- S004 – Instrument Panel and Lights (USA Market)
- S005 – PTO and brakes
Wiring harnesses
- 0.015.3655.4 – Front wiring
- 0.015.3653.4 – Preheating wiring
- 0.015.3643.4 – PF47 adapter lead
- 0.015.8107.4/3645.4 – Same hood lights
- 0.015.3649.4/10 – Battery cables
- 0.016.6138.4 – Battery cables (4 cylinders)
- 0.015.3652.4/20 – Central wiring
- 0.015.3656.4/30 – Central wiring
- 0.015.3647.4/10 – Rear wiring
- 0.015.3658.4/10 – Rear wiring
- 0.015.3661.4 – Two-speed + groundspeed PTO cable
- 0.011.7840.4 Rotating beacon coupling assembly
- 0.015.3650.4 – Number plate light cable
Service Info
A0 – TRACTOR
- Diagnostics 2026 subscription
- After-sales 2026 subscription
- SERVICE NEWS RESEARCH GUIDE
- Diagnostics 2025 subscription
- After-sales 2025 subscription
- Diagnostics 2023 subscription
- Diagnostics 2024 subscription
- Diagnostics 2022 subscription
- Diagnostics 2021 subscription
- After-sales 2024 subscription
- After-sales 2023 subscription
- After-sales 2022 subscription
- After-sales 2021 subscription
- After-sales 2019 subscription
- SDF Parts and SDF Service DVV 04/2014, version 26
- New function: Download PDF manuals
- Diagnostics – 2020 subscription
- After-sales – 2020 subscription
- After-sales – 2018 subscription
- Service and Spare Parts – 2017 Subscription
- SDF Parts and SDF Service DVDs 05/2014 version 25
- SDF Parts and SDF Service DVDs 03/2013 version 24
B0 – ENGINE
- Flushing the lubrication circuit
- Deutz AG engine oil specifications
C0 – ENGINE ACCESSORIES
- Diagnostic protocol – AdBlue – Float level unit
- Filter and prefilter tool p/n 5.9035.865.0
F0 – FRONT AXLE
- Workshop manual update – Planetary reduction gearbox
- Check the front axle steering knuckles for wear
- Steering behavior check procedure
G0 – BODYWORK – CAB
- Air conditioning system recharging
H0 – HYDRAULIC AND PNEUMATIC SYSTEM|
- Hydraulic CUNA trailer braking kit (ITALY)
- Single connection hydraulic braking kit availability update – only for EUROPEAN market
- Assembly instructions for solenoid valves and cartridge valves
- L0 – ELECTRIC AL SYSTEM
