Document overview
Operator's manual for SAME LASER 115 → S33S156WVT2E10001 from the LASER family. Digital PDF in English, 258 pages.
The original table of contents contains 62 sections and 201 detailed topics, providing a clear view of the systems and procedures covered by this edition.
- Preface
- IDENTIFICATION
- SAFETY
- GETTING TO KNOW YOUR TRACTOR
- USING THE TRACTOR
- STORING THE TRACTOR
- MAINTENANCE OPERATIONS
- FAULT DIAGNOSIS
- WHEELS
- ELECTRICAL SYSTEM
- TECHNICAL DATA
Document details
- Brand: SAME
- Family: LASER
- Model: LASER 115
- Starting serial number: S33S156WVT2E10001
- Document type: Operator's manual
- Language: English
- Pages: 258
- File size: 23.09 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that the model and starting serial number of your machine match LASER 115 → S33S156WVT2E10001.
Complete table of contents
Preface
Important
- Warnings
- Handover of the tractor to the customer
- To the owner of the new tractor
IDENTIFICATION
- List of model serial numbers
Tractor identification plates
- Tractor identification plate
- Tractor serial number
- Engine identification plate
- Engine number
- Cab/ROPS identification plate
- Original spare parts
Warranty
- Delivery and installation
- Warranty procedure
- Transport
- Post-warranty assistance
SAFETY
- Introduction
Practical advice on safe working procedures
- Protect the Environment
- General safety rules
Accident prevention and personal safety
- Safety clothing and equipment
- Exposure to noise
- Protection and safety devices
- Daily check of the tractor and implements
- Boarding and alighting from the tractor
- Parking the tractor
- Cleaning the tractor
Operation
- Start
- Checking indicator lights
- Starting fluids
- Auxiliary equipment
- Towing safely
- Driving on the road
- Overturning
Safety roll bar (ROPS)
- Roll Over Protective Structure (ROPS)
- Falling Object Protective Structure (FOPS)
- Operator Protective Structure (OPS)
- Use of hazardous substances
- Maintenance
- Safety cab
Decommissioning and disposal of the tractor
- Decommissioning the tractor
- Decommissioning and disposal of the tractor
Safety warning notices
- Adhesive safety warning decals
GETTING TO KNOW YOUR TRACTOR
Exterior views of the tractor
- Exterior views of tractor with ROPS
- Exterior views of tractor with safety cab
Access to the driving position
- Access to the operator position for tractors with platform and ROPS
- Access to the operator position for tractors with cab
Operator seat
- Seat
- “GRAMMER MSG85/721” seat with PVC upholstery
- “GRAMMER MSG85/721” seat with fabric upholstery
- Seat belt
- Passenger seat
Steering wheel
- Steering wheel
- Steering column multiswitch
Rear-view mirrors
- External rear-view mirrors for tractors with ROPS
- External rear-view mirrors for tractors with cab
- Interior rear-view mirrors
Instruments and controls for platform tractors
- Instruments and controls for platform tractors
- Instrument panel
- Right-hand console
Instruments and controls for cabbed tractors
- Instruments and controls for cabbed tractors
- Instrument panel
- Right-hand console
- Ventilation system
- Heating system
- Air conditioning system
- Cab air filter
- Cab
Instruments and tractor controls
- Operation & Maintenance Manual
- Hazard warning triangle
- Wheel chock
- Tool box
Other controls
- Control pedals
- Clutch pedal
- Brake pedal
- Parking brake lever
- Accelerator pedal
- Electronic hand throttle for tractors with ROPS
- Electronic hand throttle for tractors with safety cab
- Transmission controls
USING THE TRACTOR
Introduction
- Engine – first 50 operating hours
Starting – Stopping the engine
- Starting the engine
- Switching off the engine
- Turbocharging using the turbocharger
Transmission
- Transmission
Four-wheel drive – Differential lock
- Engaging front-wheel drive
- Front and rear differential locks
Braking
- Hydraulic trailer braking
Rear PTO
- Power take-off
- Rear PTO (540/1000 rpm)
Hydraulic rear lift
- Hydraulic lift
- LOAD SENSING mechanically controlled rear lift
3-point linkage
- 3-point linkage
Hydraulic system
- Hydraulic system
- Auxiliary control valve
- Types of auxiliary control valve
- Remote valve controls
- Correspondence between the valve controls and the hydraulic couplers
- Behaviour of the oil flow in the remote control valve
Towing devices
- Towing devices
- Category “A” drawbar
- Class “C” towing hitch
- “EEC” towing hitch
- “EEC” automatic towing hitch
- Category III drilled drawbar
- “France” version towing hitch
- Category II drilled drawbar
- Front towing hitch
STORING THE TRACTOR
- Operations prior to long term garaging
- Preparing the tractor for use after a long period of inactivity
MAINTENANCE OPERATIONS
Maintenance operations
- Maintenance intervals
- Washing the tractor/attached implements
- Fluids / lubricants and fill volumes
- Service intervals
- Maintenance and inspection schedule
Accessing the engine compartment
- Access to the engine compartment
Daily intervention
- General inspection of the tractor
- Checking the engine oil level
- Checking coolant level
- Checking the fuel level
- Check the electrical system
Maintenance every 50 hours
- Checking the transmission oil level
- Grease the rear axle
- Greasing the front axle (4WD)
- Checking clutch and brake reservoir oil level
- Check the battery
- Greasing the rear 3-point linkage
- Checking wheels and tyres
Maintenance at 100 hours (1st service)
- Checking the braking distance
- Checking engine drive belt tension
- Change the engine oil
- Changing the engine oil filter cartridge
- Checking radiator cleanliness
- Changing the fuel filters
- Renew fuel prefilter
- Checking the parking brake lever
- Checking the window washer system
- Checking the oil pipelines
- Cleaning the cab ventilation system filters
Maintenance every 300 hours
- Checking the front axle oil level (4WD)
Maintenance every 600 hours
- Set engine valves clearance and fuel injectors
- Changing the transmission oil filters
- Checking the differential lock system
Maintenance every 1200 hours or at least once a year
- Fuel injection pump maintenance
- Cleaning the engine air filter – Changing the filter element
- Starter motor maintenance
- Bleeding the hydraulic braking system
- Cab heating system maintenance
- Cab air conditioning system maintenance
- Bleeding the hydraulic clutch circuit
Maintenance every 1200 hours or at least every two years
- Changing the coolant and flushing the circuit
- Changing the transmission oil
- Changing the front axle oil (4WD)
General maintenance
- Bleeding the fuel circuit
- Bleeding the fuel prefilter
- Bleeding the hydraulic circuit of the hydrostatic steering system
FAULT DIAGNOSIS
Towing the tractor
- Towing with the engine running
- Towing with the engine off
- Safe transport of the tractor
- Lifting the tractor
- Engine troubleshooting
- Gearbox troubleshooting
- Power take-off troubleshooting
- Front-wheel drive troubleshooting
- Brakes troubleshooting
- Lift troubleshooting
- Hydraulic system troubleshooting
- Hydraulic remote valves troubleshooting
- Cab troubleshooting
- Electrical system troubleshooting
- Fault diagnosis
WHEELS
Introduction
- General information regarding tyres
- Punctures
- Wheel nut/bolt tightening torques
Tyre combinations
- Permissible tyre combinations
Track width calculation
- Minimum track width
- Track width adjustment
- Extendible axle shafts
Ballasting
- Handling ballast weights
- Ballast weight
- Front ballast
- Ballast for wheels with metal discs
- Ballast for wheels with water-filled tyres
ELECTRICAL SYSTEM
Battery
- Battery
Cab fuse box
- Fuse box
- Key to fuse and relay symbols
Lights for road use
- Lights for road use
- Headlight alignment
- Interior courtesy light
Worklights
- Work lights for tractors with platform
- Work lights for tractors with cab
Accessories
- Installation of additional electronic components and/or equipment
- Power outlet sockets
TECHNICAL DATA
- Declaration of conformity
Technical data of the tractor
- Technical data
- Fuel technical characteristics
- Biodiesel technical characteristics
- Coolant
- Noise levels
- Vibration referred to the operator position
- Maximum towable masses
Dimensions and weights
- Dimensions and weights of the tractor
- Speed tables
Implement attachment diagrams
- Implement coupling holes diagram
