Document overview
Operator's manual for SAME Laser 115.6 Turbo → S33S166WVT10001 from the LASER family. Digital PDF in English, 310 pages.
The original table of contents contains 64 sections and 228 detailed topics, providing a clear view of the systems and procedures covered by this edition.
- Preface
- IDENTIFICATION
- SAFETY
- GETTING TO KNOW YOUR TRACTOR
- USING THE TRACTOR
- STORING THE TRACTOR
- MAINTENANCE OPERATIONS
- FAULT DIAGNOSIS
- WHEELS
- ELECTRICAL SYSTEM
- TECHNICAL DATA
Document details
- Brand: SAME
- Family: LASER
- Model: Laser 115.6 Turbo
- Starting serial number: S33S166WVT10001
- Document type: Operator's manual
- Language: English
- Pages: 310
- File size: 25.65 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that the model and starting serial number of your machine match Laser 115.6 Turbo → S33S166WVT10001.
Complete table of contents
Preface
Important
- Warning
- Handover of the tractor to the customer
- To the owner of the new tractor
IDENTIFICATION
- List of model serial numbers
Identification plates
- Tractor identification label
- Tractor serial number
- Engine registration number
- Engine identification plate
- Identification label of protection devices
- Original spare parts
Warranty
- Delivery and installation
- Warranty procedure
- Transport
- Post-warranty assistance
SAFETY
- Introduction
Practical advice on safe working procedures
- Protect the Environment
- General safety rules
Accident prevention and personal safety
- Safety clothing and equipment
- Exposure to noise
- Boarding and alighting from the tractor
- Parking the tractor
- Cleaning the tractor
Operation
- Checking indicator lights
- Starting fluids
- Auxiliary equipment
- Towing safely
- Driving on the road
- Overturning
- Repairs and maintenance in safety
- Emergency stop
Protective structure and seat belt
- Roll-over protective structure (R.O.P.S.)
- Seat belt
Safety cab
- Roll Over Protective Structure (ROPS)
- Emergency exits
- Falling Object Protective Structure (FOPS)
- Operator Protective Structure (OPS)
- Use of hazardous substances
Decommissioning and disposal of the tractor
- Decommissioning the tractor
- Decommissioning and disposal of the tractor
Safety warning notices
- Adhesive safety warning decals
GETTING TO KNOW YOUR TRACTOR
Exterior views of the tractor
- External view of the tractor with ROPS
- External views of the tractor with safety cab
Access to the driving position
- Access to driver’s seat for tractors with platform and ROPS
- Access to the operator position for tractors with cab
- Exiting the cab in an emergency
Operator seat
- Operator seat
- GRAMMER MSG85/721 seat with mechanical suspension and PVC upholstery
- GRAMMER MSG85/721 seat with mechanical suspension and fabric upholstery
- GRAMMER MSG95A/721 seat with pneumatic suspension and fabric upholstery
- Seat belt
- Passenger seat
Steering wheel
- Steering wheel
- Steering column multiswitch
Rear-view mirrors
- External rear-view mirrors for tractors with ROPS
- External rear-view mirrors for tractors with cab
- Interior rear-view mirrors
Instruments and controls for platform tractors
- Instruments and controls for tractors with platform
- Instrument cluster
- Right-hand console
Instruments and controls for cabbed tractors
- Instruments and controls for tractors with cab
- Instrument cluster
- Right-hand console
- Ventilation system
- Heating system
- Air conditioning system
- Cab air filter
- Cab
- Cab roof type identification
Instruments and tractor controls
- Document pocket for the operator’s manual
- Fire extinguisher
- Hazard warning triangle
- Wheel chock
- Tool box
Other controls
- Control pedals
- Clutch pedal
- Brake pedal
- Parking brake lever
- Accelerator pedal
- Electronic hand throttle for tractors with safety cab
- Electronic hand throttle for tractors with ROPS
- Transmission controls
USING THE TRACTOR
Introduction
- Engine – first 50 operating hours
Starting – Stopping the engine
- Starting the engine
- Switching off the engine
- Turbocharging using the turbocharger
- Dismounting from the tractor safely
Transmission
- Transmission
Four-wheel drive – Differential lock
- Engaging front-wheel drive
- Front and rear differential locks
- “ASM/SBA SYSTEM” Device
Braking
- Brakes, “SEPARATE BRAKES” Valve
- Hydraulic trailer braking
Rear PTO
- Rear PTO – definition and versions
- Rear PTO controls and indicator lamps
- Use of the rear PTO
- Use of the ground speed (Sync) PTO
- Coupling and uncoupling of PTO-driven implements/machinery
Hydraulic rear lift
- Hydraulic lift
- Mechanically controlled rear «LOAD SENSING» lift
3-point linkage
- Rear 3-point linkage
- Adjusting the 3-point linkage
- Hitching and unhitching implements to/from the 3-point linkage
Hydraulic system
- Hydraulic system
- Types of auxiliary hydraulic distributor
- Hydraulic distributor controls
- Hydraulic lines associated with controls
- Oil flow inside the hydraulic distributor
Towing devices
- Towing devices
- Technical characteristics of towing hitches
- Adjusting the height of the towing hitches
- Angle brackets for towing hitches
- Drawbar
- Hitch support frame
- Piton Fix or ball towing hitch frame
- Towing hitch with lock pin
- Towing hitch with safety lock
- Automatic towing device
- Tractor/implement combination
- Weighing the tractor
STORING THE TRACTOR
- Operations prior to long term garaging
- Preparing the tractor for use after a long period of inactivity
MAINTENANCE OPERATIONS
Maintenance operations
- Maintenance intervals
- Washing the exterior of the tractor/attached implements
- Washing the cab interior
- Fluids – Lubricants and fill volumes
- Service intervals
- Maintenance table – 1st Service
- Maintenance table
Accessing the engine compartment
- Access to the engine compartment
Daily intervention
- General inspection of tractor
- Checking the engine oil level
- Checking the coolant level
- Checking the fuel level
- Check the electrical system
- Bleeding the fuel circuit
Maintenance every 50 hours
- Checking the transmission oil level
- Greasing the front axle (4WD)
- Grease the rear axle
- Greasing the rear 3-point linkage
- Checking the clutch and brake reservoir oil level
- Maintenance of towing devices
- Checking wheels and tyres
- Check the ballast weights
Maintenance at 100 hours (1st service)
- Contact an authorised service centre
- Checking the braking distance
- Changing the engine oil
- Changing the engine oil filter cartridge
- Checking radiator cleanliness
- Changing the fuel filters
- Checking the parking brake lever
- Checking the window washer system
- Cleaning the cab ventilation system filters
- Checking the oil pipelines
- Check the battery
Maintenance every 300 hours
- Checking the front axle oil level (4WD)
Maintenance every 600 hours
- Replacing the prefilter:
- Changing then oil filters for the gearbox, hydrostatic power steering system, lift unit and remote valves
- Bleeding the hydraulic clutch circuit
- Bleeding the hydraulic braking system
- Bleeding the hydraulic circuit of the hydrostatic steering system
Maintenance every 1200 hours or at least once a year
- Checking the protective structure and seat belt
- Cleaning the engine air filter – Changing the filter element
- Cab heating system maintenance
- Maintenance of cab air conditioning system
Maintenance every 1200 hours or at least every two years
- Changing the coolant and flushing the circuit
- Changing the transmission oil
- Changing the front axle oil
FAULT DIAGNOSIS
Towing the tractor
- Towing with the engine running
- Towing with the engine off
Front emergency tow device
- Warnings
- Hazards and protective equipment
- Hitching and unhitching
- Safe transport of the tractor
Lift the tractor
- Lifting tractor completely
- Lifting one tyre
- Lifting front or rear of the tractor
- Lifting front of the tractor to adjust steering angle and axle suspension excursion
- Engine troubleshooting
- Gearbox troubleshooting
- Front and rear power take-off troubleshooting
- Front-wheel drive troubleshooting
- Brakes troubleshooting
- Lift troubleshooting
- Hydraulic system troubleshooting
- Hydraulic remote valves troubleshooting
- Cab troubleshooting
- Electrical system troubleshooting
- Fault diagnosis
WHEELS
Introduction
- General information regarding tyres
- Punctures and changing tyres
- Steering angle adjustment
- Adjusting steering angle for axles with four limit screws
- Adjusting steering angle for axles with two limit screws
- Wheel nut/screw tightening torques
Tyre combinations
- Permissible tyre combinations
- Tyre load capacity
- Calculation of the mechanical lead
Track width calculation
- Minimum track width
- Track width adjustment
- Adjusting the steering front mudguards
Ballasting
- Ballasting
- Ballast support
- Intermediate plate
- Suitcase ballast weights
- One-piece ballast block
- Metal wheel discs
- Liquid ballasting for tyres
ELECTRICAL SYSTEM
Battery
- Battery
Cab fuse box
- Fuse box
- Key to fuse and relay symbols
Lights for road use
- Lights for road use
- Headlight alignment
- Interior courtesy light
Worklights
- Work lights for tractors with platform
- Work lights for tractors with cab
Accessories
- Installation of electronic components and/or equipment
- Power outlet sockets
TECHNICAL DATA
- Declaration of conformity
Technical data of the tractor
- Technical data
- Fuel technical characteristics
- Biodiesel technical characteristics
- Coolant
- Driving seat’s vibrations
- Ballasts – Technical data
- Maximum towable masses
Dimensions and weights
- Dimensions and weights of the tractor
- Speed tables
Implement attachment diagrams
- Implement coupling hole layout
