Document overview
Operator's manual for SAME KRYPTON³ 110 → ZKDR7813C0TS1001 / 2001 from the KRYPTON³ (STAGE 3A) family. Digital PDF in English, 198 pages.
The original table of contents contains 56 sections and 154 detailed topics, providing a clear view of the systems and procedures covered by this edition.
- Preface
- IDENTIFICATION
- SAFETY
- GETTING TO KNOW THE TRACTOR
- USE OF THE TRACTOR
- MAINTENANCE OPERATIONS
- ELECTRICAL SYSTEM
- TECHNICAL DATA
- TROUBLESHOOTING
- STORAGE OF THE TRACTOR
Document details
- Brand: SAME
- Family: KRYPTON³ (STAGE 3A)
- Model: KRYPTON³ 110
- Starting serial number: ZKDR7813C0TS1001 / 2001
- Document type: Operator's manual
- Language: English
- Pages: 198
- File size: 19.30 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that the model and starting serial number of your machine match KRYPTON³ 110 → ZKDR7813C0TS1001 / 2001.
Complete table of contents
Preface
Important
- Warnings
- Handover of the tractor to the customer
- To the owner of the new tractor
IDENTIFICATION
- List of model serial numbers
Identification plates
- Tractor identification plate
- Tractor serial number
- Engine number
- Engine identification plate
- ROPS identification plate
Original spare parts
- When ordering replacement parts, please supply the following information:
Warranty
- Delivery and installation
- Warranty procedure
- Transport
- Post-warranty assistance
SAFETY
- Introduction
- Introduction
- General safety rules
Accident prevention and safety
- Safety clothing and equipment
- Exposure to noise
- Protection and safety devices
- Checking the tractor and implements
- Boarding and alighting from the tractor
- Parking the tractor
- Cleaning the tractor
Operation
- Starting
- Checking indicator lights
- Starting fluids
- Auxiliary equipment
- Risk of overturning
- High risk operations
- Towing safely
- Driving on the public highway
- Maintenance
Safety roll bar (ROPS)
- Roll Over Protective Structure (ROPS)
- Falling Object Protective Structure (FOPS)
- Operator Protective Structure (OPS)
- Use of hazardous substances
Decommissioning and disposal of the tractor
- Decommissioning the tractor
- Decommissioning and disposal of the tractor
Safety decals
- Adhesive safety warning decals
GETTING TO KNOW THE TRACTOR
External views of the tractor
- General view of tractor
Access to the driving position
- Access to the driving position
Instruments and tractor controls
- Tractor instruments and controls
- Instrument panel
- Steering levers
- Brake pedal
- Parking brake lever
- Clutch pedal
- Decelerator pedal
- Right-hand console
- Left-hand console
Operator seat
- Operator seat
- GRAMMER MSG93/20 seat with pneumatic suspension
- COBO SC47 seat
- Seat belt
Rear-view mirrors
- External rear-view mirrors
Crawler undercarriage
- Track chains
Accessories
- Operation & Maintenance Manual
- Fire extinguisher
- Hazard warning triangle
- Tool box
USE OF THE TRACTOR
Introduction
- Running-in and the first 50 operating hours
Starting – Stopping the engine
- Start
- Switching off the engine
- Turbocharging using the turbocharger
Driving the tractor
- Driving the tractor
Transmission
- Transmission
Steering clutches
- Steering clutches
- Brakes
- Parking brake
Rear PTO
- Power take-off
- PTO (540/750/1000 rpm)
Rear hydraulic lift
- Hydraulic lift
3-point linkage
- Three-point linkage
Hydraulic system
- Hydraulic system
- Remote control valve
- Types of remote control valve
- Remote valve controls
- Correspondence between the control levers and the rear hydraulic couplers
- Behaviour of the oil flow in the hydraulic circuit connecting the couplers and the actuator cylinders on the implement
Towing devices
- Towing devices
- Drawbar
- Front towing hitch
Crawler undercarriage
- Crawler undercarriage
Ballast weights
- Handling ballast weights
- Ballasting
MAINTENANCE OPERATIONS
Maintenance operations
- Maintenance intervals
- Washing the tractor/attached implements
- Fluids – Lubricants and fill volumes
- Service intervals
- Maintenance and inspection schedule
Access to the engine compartment
- Accessing the engine compartment
Daily intervention
- General inspection of the tractor
- Checking the engine oil level
- Checking coolant level
- Checking the fuel level
- Check the electrical system
- Checking for oil leaks from the rollers and front idler wheel
Maintenance every 50 hours
- Checking radiator cleanliness
- Checking the transmission oil level
- Checking the operation of the steering clutch/brakes control levers
- Checking the clutch and brake reservoir oil level
- Check the battery
- Grease the 3-point linkage
- Greasing the pivot pin of the front leaf spring
- Greasing the track support bar
- Adjusting the tension of the track chains
Maintenance at 100 hours – 1st Service
- Checking engine belt tension
- Changing the engine oil
- Changing the engine oil filter cartridge
- Changing the fuel filter and sediment filter
- Checking the parking brake lever
Maintenance every 300 hours
- Checking the oil level of the final drives
Maintenance every 600 hours
- Set engine valves clearance and fuel injectors
- Changing the oil filter for the transmission, hydraulic lift and auxiliary services circuits
- Checking the track plates for wear
Maintenance every 1200 hours or at least once a year
- Fuel injection pump maintenance
- Changing air filter cartridge and internal safety cartridge
- Starter motor maintenance
Maintenance every 1200 hours or at least every two years
- Changing the coolant and flushing the circuit
- Changing the transmission oil
- Changing the oil in the final drives
ELECTRICAL SYSTEM
Battery
- Battery
Fuse box
- Fuse box
- Key to fuse and relay symbols
Lights for road use
- Lights for road use
- Headlight alignment
Worklights
- WORKLIGHTS
Accessories
- Installation of additional electronic components and/or equipment
- Power outlet sockets
TECHNICAL DATA
- Declaration of conformity
Technical data
- Technical data
- Fuel – technical characteristics
- Biodiesel technical characteristics
- Coolant
- Noise levels
- Vibration referred to the operator position
Dimensions and weights
- Dimensions and weights of the tractor
Implement attachment diagrams
- Implement coupling holes diagram
TROUBLESHOOTING
Towing the tractor
- Towing with the engine running
- Towing with the engine off
- Safe transport of the tractor
- Lifting the tractor
- Engine troubleshooting
- Gearbox troubleshooting
- Power take-off troubleshooting
- Brakes troubleshooting
- Lift troubleshooting
- Hydraulic remote valves troubleshooting
- Electrical system troubleshooting
- Steering clutch troubleshooting
- Track chain troubleshooting
STORAGE OF THE TRACTOR
- Operations prior to long term garaging
- Preparing the tractor for use after a long period of inactivity
