Document overview
Operator's manual for SAME EXPLORER³ 90 T CLASSIC → ZKDAA302W0TS30001 from the EXPLORER³ T-TB (STAGE 3A) family. Digital PDF in English, 248 pages.
The original table of contents contains 60 sections and 188 detailed topics, providing a clear view of the systems and procedures covered by this edition.
- Preface
- IDENTIFICATION
- SAFETY
- GETTING TO KNOW YOUR TRACTOR
- USING THE TRACTOR
- STORING THE TRACTOR
- MAINTENANCE OPERATIONS
- FAULT DIAGNOSIS
- WHEELS
- ELECTRICAL SYSTEM
- TECHNICAL DATA
Document details
- Brand: SAME
- Family: EXPLORER³ T-TB (STAGE 3A)
- Model: EXPLORER³ 90 T CLASSIC
- Starting serial number: ZKDAA302W0TS30001
- Document type: Operator's manual
- Language: English
- Pages: 248
- File size: 20.80 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that the model and starting serial number of your machine match EXPLORER³ 90 T CLASSIC → ZKDAA302W0TS30001.
Complete table of contents
Preface
Important
- Warning
- Handover of the tractor to the customer
- To the owner of the new tractor
IDENTIFICATION
- List of model serial numbers
Identification plates
- Tractor identification plate
- Tractor serial number
- Engine number
- Engine identification plate
- ROPS identification plate
- Original spare parts
Warranty
- Delivery and installation
- Warranty procedure
- Transport
- Post-warranty assistance
SAFETY
- Introduction
Practical advice on safe working procedures
- Protect the Environment
- General safety rules
Accident prevention and personal safety
- Safety clothing and equipment
- Exposure to noise
- Boarding and alighting from the tractor
- Parking the tractor
- Cleaning the tractor
Operation
- Checking indicator lights
- Starting fluids
- Auxiliary equipment
- Towing safely
- Driving on the road
- Overturning
Protective structure and seat belt
- Roll-over protective structure (R.O.P.S.)
- Seat belt
- Repairs and maintenance in safety
- Emergency stop
Decommissioning and disposal of the tractor
- Decommissioning the tractor
- Decommissioning and disposal of the tractor
Safety warning notices
- Adhesive safety warning decals
GETTING TO KNOW YOUR TRACTOR
Exterior views of the tractor
- External views of the tractor
Access to the driving position
- Access to the driving position
Operator seat
- Operator seats
- “COBO MT” seat with sensor
- Seat belt
Steering wheel
- Steering wheel
Rear-view mirrors
- External rear-view mirror
Instruments and tractor controls
- Instruments and tractor controls
- Instrument panel
- Console switches
- Steering wheel stalk control
- Right-hand console
- Protective structure and seat belt
- Document pocket for the operator’s manual
- Fire extinguisher
- Hazard warning triangle
- Wheel chock
- Tool box
Other controls
- Control pedals
- Clutch pedal
- Brake pedal
- Parking brake lever
- Accelerator pedal
- Electronic hand throttle
- Transmission controls
USING THE TRACTOR
Introduction
- Engine – first 50 operating hours
Starting – Stopping the engine
- Starting the engine
- Switching off the engine
- Dismounting from the tractor safely
- Turbocharging using the turbocharger
Transmission
- Transmission
- Mechanical shuttle
Four-wheel drive – Differential lock
- Engaging front-wheel drive
- Front and rear differential locks
Braking
- Brakes, “SEPARATE BRAKES” Valve
- Hydraulic trailer braking
Rear PTO
- Rear PTO – definition and versions
- Rear PTO controls and indicator lights
- Use of the rear PTO
- Use of the ground speed (Sync) PTO
- Rear PTO technical specifications
- Coupling and uncoupling of PTO-driven implements
Hydraulic rear lift
- Hydraulic lift
- Mechanically controlled rear load sensing lift
3-point linkage
- Three-point hitch
Hydraulic system
- Hydraulic system
- Remote control valve
- Types of remote control valve
- Remote valve controls
- Correspondence between the control levers and the rear hydraulic couplers
- Behaviour of the oil flow in the hydraulic circuit connecting the couplers and the actuator cylinders on the implement
Towing devices
- Towing devices
- Angle brackets for towing hitches
- Towing hitch with lock pin
- Standard long hitch support frame
- Towing hitch with safety lock
- Semi-automatic towing hitch
- Automatic towing hitch
- Piton Fix or ball towing hitch frame
- Drawbar
STORING THE TRACTOR
- Operations prior to long term garaging
- Preparing the tractor for use after a long period of inactivity
MAINTENANCE OPERATIONS
Maintenance operations
- Maintenance intervals
- Washing the tractor/attached implements
- Fluids – Lubricants and fill volumes
- Service intervals
- Maintenance and inspection schedule
Accessing the engine compartment
- Accessing the engine compartment
Daily intervention
- General inspection of the tractor
- Checking the engine oil level
- Checking coolant level
- Checking the fuel level
- Check the electrical system
- Checking the protective structure and seat belt
Maintenance every 50 hours
- Checking the transmission oil level
- Grease the rear axle
- Greasing the front axle (2WD)
- Greasing the front axle (4WD)
- Checking clutch and brake reservoir oil level
- Check the battery
- Greasing the rear 3-point linkage
- Checking wheels and tyres
Maintenance at 100 hours (1st service)
- Checking the braking distance
- Checking engine belt tension
- Changing the engine oil
- Changing the engine oil filter cartridge
- Checking radiator cleanliness
- Changing the fuel filter
- Check the parking brake lever
- Checking the oil pipelines
Maintenance every 300 hours
- Check front PTO oil level (4WD) ()
Maintenance every 600 hours
- Set engine valves clearance and fuel injectors
- Renewing gearbox oil filters, hydrostatic steering, lift
- Checking the differential lock system
- Checking the braking system with safety brakes valve
Maintenance every 1200 hours or at least once a year
- Fuel injection pump maintenance
- Cleaning engine air filter – Changing air filter cartridge and internal safety cartridge
- Starter motor maintenance
- Bleeding air from the hydraulic circuit of the front and rear brakes
- Front wheel hub bearings (2WD)
- Bleeding the hydraulic clutch circuit
Maintenance every 1200 hours or at least every two years
- Changing the coolant and flushing the circuit
- Changing the transmission oil
- Changing the front wheel hub oil (2WD)
- Changing the differential oil, planetary reduction unit oil and side final drives oil (4WD)
General maintenance
- Bleeding the fuel circuit
FAULT DIAGNOSIS
Towing the tractor
- Towing with the engine running
- Towing with the engine off
- Safe transport of the tractor
- Lifting the tractor
- Engine troubleshooting
- Gearbox troubleshooting
- Front and rear power take-off troubleshooting
- Front-wheel drive troubleshooting
- Brakes troubleshooting
- Lift troubleshooting
- Hydraulic system troubleshooting
- Hydraulic remote valves troubleshooting
- Electrical system troubleshooting
- Fault diagnosis
Instrument panel alarms
- Display of alarms
- P.T.O. self-diagnosis indicator light.
WHEELS
Introduction
- General information regarding tyres
- Punctures
- Wheel nut/bolt tightening torques
Tyre combinations
- Permissible tyre combinations
- Tyre load capacities
- Calculation of the mechanical lead
Track width calculation
- Minimum track width
- Track width adjustment
- Adjustment of the front fenders (2WD)
- Adjustment of the front fenders
Ballasting
- Handling ballast weights
- Tractor ballast
- Front ballast with cast-iron blocks
- Ballast for wheels with water-filled tyres
ELECTRICAL SYSTEM
Battery
- Battery
Cab fuse box
- Fuse box
- Key to fuse and relay symbols
Lights for road use
- Lights for road use
- Headlight alignment
Worklights
- Worklights
Accessories
- Installation of additional electronic components and/or equipment
- Power outlet sockets
TECHNICAL DATA
- Declaration of conformity
Technical data of the tractor
- Technical data
- Fuel technical characteristics
- Biodiesel technical characteristics
- Coolant
- Vibration referred to the operator position
- Noise levels
- Maximum towable masses
Implement attachment diagrams
- Implement coupling holes diagram
