Document overview
Workshop Manual for LAMBORGHINI MACH 250 VRT → WSXFT50200LL10001 from the MACH VTR (STAGE 5) family. Digital PDF in English with 1,862 pages.
The corresponding English table of contents contains 46 sections and 710 individual topics.
Main sections included
- Introduction
- Safety
- Technical characteristics
- Calibrations and electronic diagnosis
- Method of intervention
- Wiring diagrams
- Service Info
Document details
- Brand: LAMBORGHINI
- Family: MACH VTR (STAGE 5)
- Model: MACH 250 VRT
- Starting serial number: WSXFT50200LL10001
- Document type: Workshop Manual
- Language: English
- Pages: 1,862
- File size: 406.87 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that your machine model and reference code match LAMBORGHINI MACH 250 VRT → WSXFT50200LL10001.
Complete table of contents
Introduction
- Tightening Torques
- Pump tightening torques
- Installation of solenoid valves and cartridge valves
- Installation of quick couplers
- Units of measurement and conversion factors
Safety
Preface
- Important notes concerning safety
Important safety information
- Recognising hazards
- Indications for persons in contact with the tractor
Safety rules
- Risks during tractor preparation
- Risks during maintenance
- Work on machine systems
- Special disassembly/assembly/inspection procedures
Safety pictograms
- Replacing safety pictograms
Environmental risks
- Hazards associated with the operating environment
Technical characteristics
Engine
- Technical data – Pressure/temperature transmitter
- Technical data – Pressure transducer
- Pressure transducer
- Technical data – Pressure transducer
- Pressure sensor
- Technical data – Pressure transducer
- Pressure transducer
- Technical data – Pressure sensor
- Technical data – Temperature transmitter
- Technical data – Temperature transmitter
- Technical data – Temperature transmitter
- Temperature sender
- Technical data – Temperature transmitter
- Technical data – Temperature transmitter
- Technical data – Speed indicator
- Technical data – Speed indicator
- Technical data – Speed indicator
- technical specifications – NOx sensor (24 V)
- technical specifications – NOx sensor (12 V)
Transmission
- Transmission (50 Km/h)
- Transmission (60 Km/h)
- System diagram
- Description of function
- Transmission control
Front axle
- Specifications
- Maintenance
Bodywork – Cab – Platform
- Air conditioning system
Hydraulic system
- Front suspension system – INTEGRAL accumulators
- Hydraulic system basic version
- Hydraulic system, full house version
- Basic hydraulic system (“Mother Regulation”)
- Hydraulic system, full house version (“Mother Regulation”)
- Hydraulic system, optional version (“Mother Regulation”)
- 45 cc variable displacement pump
- 63 cc variable displacement pump
- Hydraulic pump
- Load sensing valve, pressure cut-off valve
- Priority valve
- Power steering
- Hydraulic front axle suspension
- Servo-brake valve for front axle
- Hydraulic trailer braking system – Italy version
- Hydraulic trailer braking system – Export version
- Steering gear pump – Version without compressor
- Steering gear pump – Version with compressor
- Braking system
- Master cylinder
- Remote control valve – 8-way version
- Ancillary utility distributor – 10-way version
- Remote control valve – 12-way version
- Remote control valve – 14-way version
- Braking system
- Compressor
- Pressure limiting valve
- Trailer air braking valve (1-way)
- Trailer air braking valve (2-way)
- Pneumatic trailer braking valve with unbraked front axle (2-way)
Front PTO
- Front PTO
Calibrations and electronic diagnosis
- ECUs
Diagnostic tools
- D-Tech and diagnostic ports
- D-TECH App
Commissioning and calibrating the tractor
- Commissioning procedure (EOL)
- ECU Reset
- Set vehicle model (SECU)
- Transmission Control Unit (TCU) initialization
- ECUs initialization
- Distributors configuration
- Maximum vehicle speed
- Tyre type
- Language
- Measurement unit
- Air brake
- Front Power Take-Off (PTO)
- Radar
- Automatic Air Conditioning
- iMonitor
- ISO 11786
- Isobus
- MMI (man machine interface)
- Agrosky
- Font Susp
- ASM (Automatic Steering Management)
- Front speed sensor
- Ext cylinders
- Oil pump displacement
- Stoll
- Engine brake
- Auxiliary tank
- Wet brake
- Pneumatic trailer brake
- Hydraulic trailer brake
- PTO front ratio configuration
- Distributors command calibration neutral
- Clutch pedal calibration
- Throttle pedal calibration
- Hand gas calibration
- Park brake parameter configuration
- Slope sensor calibration
- Water mix motor calibration
- Recirculation Motor calibration
- Draft sensor calibration
- Rear hitch position calibration
- Front hitch calibration
- Front suspension calibration
- Wheel angle sensor calibration
- Transmission calibration
- PTO calibration
- Front speed sensor calibration
ECU alarms
- SDF Severity of alarms
- ECU ALARMS
Software management
- Engine dataset upgrade
Method of intervention
- Workshop tools for front axle
B0 – Engine
- Separating engine / transmission
- Engine
- Disassembling and assembling alternator (poly-V-belt, level 1)
- Disassembling and assembling crankcase breather
- Replacing the crankshaft O-ring (opposite end to flywheel)
- Disassembling/assembling crankshaft wear sleeve (side opposite flywheel)
- Disassembling and assembling the front cover (fixing elements)
- Assembly and disassembly of piston cooling nozzles
- Assembly and disassembly of piston cooling nozzles
- Checking the camshaft bearing
- Removing and refitting crankshaft bearing cap
- Blanking elements
- Blanking elements
- Blanking elements
- Blanking elements
- Oil dipstick
- Oil dipstick
- Pipe (crankcase breather)
- Disassembling and assembling the lubricant oil sump (pressed steel sump)
- Removing and fitting lubricant oil sump (heavy version)
- Removing and fitting lubricant oil sump (heavy version)
- Removing and fitting lubricant oil sump (heavy version)
- Oil filler neck
- Disassembling and assembling the torsional vibration damper
- Disassembling and assembling the torsional vibration damper
- Disassembling and assembling the torsional vibration damper
- Disassembling and assembling the flywheel (fixing elements)
- Replacing the starter motor ring gear on the flywheel
- Removing and fitting the crankshaft
- Check the crankshaft
- Check the endfloat of the crankshaft
- Assembly and disassembly of the crankshaft bearing
- Check the crankshaft bearings
- Disassembly and reassembly of connecting rod shank
- Check the connecting rod shank
- Disassembling and assembling the piston
- Check the piston
- Check the piston
- Check the piston rings
- Check the piston rings
- Check the piston rings
- Compression test
- Checking compression
- Disassembling and assembling the cylinder head cover
- Removing and fitting the cylinder head cover
- Removing and fitting the cylinder head cover
- Removing and fitting the cylinder head cover
- Disassembling and assembling the piston rings
- Disassembling and assembling the cylinder head (fasteners)
- Disassembling and assembling the cylinder head (fasteners)
- Measuring piston protrusion
- Assembly and disassembly of the valves
- Removing and fitting the valves
- Checking valves, valve guides, valve springs and valve recess
- Replacing the injector bush
- Clean the injector bush
- Clean the injector bush seat
- Blanking elements (cylinder head)
- Eye-bolt for transporting (cylinder head)
- Eye-bolt for transporting (cylinder head)
- Transport eye-bolt (cylinder head)
- Transport eye-bolt (cylinder head)
- Transport eye-bolt (cylinder head)
- Replace the crankshaft O-ring (flywheel end)
- Disassembling and assembling the gearbox
- Assembly and disassembly of the camshaft
- Check the camshaft
- Checking and setting valve clearance (6 cylinder)
- Assembly and disassembly of the distribution valve
- Removing and refitting the valve timing system
- Disassembly and assembly of the control elements
- Disassembling and assembling the oil cooler
- Removing and fitting the lubricant oil radiator
- Removing and fitting the lubricant oil radiator
- Removing and fitting the lubricant oil radiator housing
- Disassembling and assembling the lubricant oil radiator (blanking elements)
- Removing and fitting the lubricant oil radiator housing (fastener elements)
- Blanking elements (lubricant oil cooler housing)
- Blanking elements (lubricant oil cooler housing)
- Coolant pipe (lubricant oil radiator housing – crankcase)
- Coolant pipe (Lubricant oil cooler – cylinder head)
- Disassembling and assembling the oil suction pipe
- Disassembly and assembly of the fuel control unit (fastening elements)
- Disassembly and completion of the fuel control unit
- Disassembling and completing assembly of the fuel control unit (2000 bar injection system)
- Disassembling and assembling the high pressure pump (fastener elements)
- Disassembling and assembling the injector (1600 bar injection system)
- Disassembling and assembling the injector (1600 bar injection system)
- Flexible hose connectors
- Connector plug (fuel delivery pump)
- Removing and refitting fuel lines (fuel delivery pump – pilot block)
- Disassembling and assembling the fuel line (fuel control block – high pressure pumps)
- Disassembling and assembling the rail (1600 bar injection system)
- Disassembling and assembling the rail (1600 bar injection system)
- Disassembling and assembling the rail (2000 bar injection system)
- Disassembling and assembling the pressure cut-off valve (rail)
- Disassembling and assembling the pressure cut-off valve (rail)
- Disassembly and assembly of the rail pressure sensor
- Disassembly and assembly of the rail pressure sensor
- Removing and refitting fuel lines (Rail, cylinder head, fuel control unit – fuel filter)
- Fuel pipes (Fuel pump, fuel filter, pilot lock)
- Fuel pipes (Rail, cylinder head, pilot lock- fuel filter)
- Vibration damper (installation position)
- Disassembling and assembling charge air pipe
- Disassembling and assembling charge air pipe
- Removing and fitting the coolant pump
- Disassembling and assembling coolant pipe (ribbed V-belt, level 1)
- Removing and fitting the coolant pump (fastening elements)
- Removing and refitting adapter (coolant pump – thermostat housing)
- Transmission components (coolant pump)
- V-belt pulley
- Assembling and disassembling the thermostat
- Assembling and disassembling the thermostat
- Disassembling and assembling the thermostat
- Check the thermostat (after removing)
- Check the thermostat (after removing)
- Removal and installation of the thermostat housing
- Removal and installation of the thermostat housing
- Removal and installation of the thermostat housing
- Disassembling and assembling the thermostat housing (fastener elements)
- Blanking elements (coolant pump – thermostat housing)
- Blanking elements (thermostat housing)
- Blanking elements (thermostat housing)
- Blanking elements (thermostat housing)
- Blanking elements (thermostat housing)
- Blanking elements (thermostat housing)
- Flexible hose fastening (Thermostat housing)
- Flexible hose connector (thermostat box)
- Connection (compensation line)
- Breather pipe (thermostat box – cooler)
- Pipes (AGR radiator cylinder head)
- Compensation line (thermostat box)
- Removing and fitting belt tensioner (ribbed V belt)
- Disassembly and refitting of the belt tensioner (ribbed V-belt, level 1)
- Disassembly and refitting of the belt tensioner (ribbed V-belt, level 1)
- Removal and assembly of the fan support
- Removal and assembly of the fan support
- Removal and assembly of the fan support
- Removal and assembly of the fan support
- Fastener elements (fan mount)
- Disassembling and assembling the exhaust manifold
- Disassembling and assembling the exhaust manifold
- Removal and installation of the exhaust pipe (auxiliaries)
- Disassembling and assembling the exhaust manifold
- Assembling and disassembling the console
- Disassembling and assembling the butterfly valve
- Disassembling and assembling the butterfly valves
- Disassembling and assembling the radiator
- Removing and fitting the exhaust gas recirculation (EGR) radiator
- Disassembling and assembling the regulator
- Disassembling and assembling the regulator
- Disassembling and assembling the Venturi pipe
- Disassembling and assembling the Venturi pipe
- Removing and fitting the pipes (cylinder head – radiator, radiator – cylinder head).
- Exhaust gas pipe (Venturi tubes – mixing tubes)
- Pipe (exhaust pipe – pressure transducer)
- Pipe (exhaust pipe – pressure transducer)
- Disassembling and assembling the turbocharger
- Disassembling and assembling the turbocharger
- Disassembling and assembling the turbocharger
- Disassembling and assembling the lubricating oil pipe (exhaust gas turbocharger)
- Disassembling and assembling the lubricating oil pipe (exhaust gas turbocharger)
- Removing and refitting the lubricant oil return pipe – (upper section) – (turbocharger)
- Removing and refitting the lubricant oil return pipe – (upper section) – (turbocharger)
- Disassembling and assembling the lubricating oil return pipe (turbocharger)
- Removing and refitting the lubricant oil return pipe – (lower section) – (turbocharger)
- Removing and refitting the lubricant oil return pipe – (lower section) – (turbocharger)
- Removing and refitting the lubricant oil return pipe – (lower section) – (turbocharger)
- Disassembling and assembling alternator (poly-V-belt, level 1)
- Disassembling and assembling alternator (poly-V-belt, level 1)
- Removing and fitting the V belt pulley/poly-V belt pulley (alternator)
- Disassembling and assembling the console (ribbed V-belt, level 1)
- Disassembling and assembling the console (ribbed V-belt, level 1)
- Disassembling and assembling the console (ribbed V-belt, level 1)
- Disassembling and assembling the console (ribbed V-belt, level 1)
- Fitting and removing the rotation device (PTOC)
- Fitting and removing the rotation device
- Disassembling and assembling the connector housing
- Cover (connector casing)
- Cover (connector casing)
- Cover (connector casing)
- Disassembling and assembling the heater
- Disassembling and assembling the heater
- Disassembling and assembling the heater
- Removing and fitting the charge air elbow pipe
- Disassembling and assembling the mixer pipe
- Disassembling and assembling the mixer pipe
- Disassembling and assembling the butterfly valve
- Disassembling and assembling the butterfly valve
- Disassembly and assembly of the flange
- Removing and refitting the diesel particulate filter
- Removing and fitting the diesel particulate filter (9.5 ” axial and radial system – removed)
- Disassembling and assembling the NOx sensor
- Pressure transducer (exhaust back-pressure).
- Fitting the SCR (Selective Catalytic Reduction) dosing unit
- Cleaning the SCR delivery pump (Selective Catalytic Reduction)
- Cleaning/Checking SCR (Selective Catalytic Reduction) metering unit
- Cleaning the SCR (Selective Catalytic Reduction) pipe (delivery pump – metering unit)
- Blanking elements (diesel oxidation catalytic converter/diesel particulate filter, SCR catalytic converter)
- Cover guard (Differential pressure transducer)
- Mount (Exhaust after-treatment system 9.5″)
- SCR (Selective Catalytic Reduction) urea solenoid valve
- SCR delivery pump (Selective Catalytic Reduction)
- Outlet module particulate filter
- Mixer pipe (threaded connection) SCR (Selective Catalytic Reduction)
- Mixer pipe (fastening element) SCR (Selective Catalytic Reduction)
- Blanking elements (crankcase, PTO-A)
- Closing elements (Power Take-Off PTO-B)
- Closing elements (Power Take-Off PTO-B)
- Blanking elements (gearbox, PTO-C)
- Blanking elements (gearbox, PTO-C)
C0 – Engine accessories
- Removing and fitting the fuel filter head
- Disassembling and assembling the fuel delivery pump (fastener elements)
- Fuel filter
- Manual fuel pump
- Filter holder
- Assembly of the pressure transducer (fuel pressure)
- Disassembly and refitting of the intake air pressure/temperature sender
- Blanking elements (mixer pipe, intake air)
- Shield plate (exhaust gas back-pressure sensor)
- Turbocharger shield plate
- Support plate (exhaust gas back-pressure relay – sensor)
- Support (shield plate)
- Pressure transducer (exhaust back-pressure).
- Pressure transducer (exhaust back-pressure).
- Connector manifold (intake air)
- Connector manifold (intake air)
- Intake manifold (exhaust gas turbocharger)
- Removing and fitting the fan mount (fastener elements)
- Removing and fitting the fan mount (fastener elements)
- Removing and fitting the temperature sender
- Removing and fitting the pressure transducer
- Mount (radiator – exhaust gas recirculation)
- Mount (radiator – exhaust gas recirculation)
- Pressure transducer/Duct (exhaust gas back-pressure).
- Pressure transducer/Duct (exhaust gas back-pressure).
- Disassembling and assembling the pressure transducer (exhaust back-pressure)
- Connection (Starter)
- Connection (Starter)
- Shield plate (starter)
- Alternator
- Starter (fasteners)
- Mount (Assembly foot, side opposite of the flywheel)
- Mount (assembly foot, side opposite of the flywheel)
- Mount (assembly foot, flywheel side)
- Disassembling and assembling the crankshaft speed sensor (fastener elements)
- Disassembling and assembling the crankshaft speed sensor (fasteners)
- Disassembling and assembling the crankshaft speed sensor (fasteners)
- Disassembling and assembling the camshaft speed sensor (ancillaries)
- Disassembly and refitting of the intake air pressure/temperature sender
- Fastener elements (wiring bundle)
- Fastener elements (wiring bundle)
- Fastener elements (wiring bundle)
- Support plate (on the charge air pipe)
- Support (wiring harness)
- Temperature sender (coolant)
- Fitting the pressure transducer (fuel pressure / lubricant oil pressure)
- Relay (heater, thermo-starter, glow plugs)
- Connector cable (relay – alternator)
- Connector cable (relay – heater)
- Protective cap (relay)
- Heater (connector line)
- Check the seal of the cooling system
- Differential pressure sender (diesel particulate filter)
- Differential pressure sender (diesel particulate filter)
- Temperature sender (upstream of the SCR catalytic converter)
- Temperature sender (ahead of and after diesel oxidation catalytic converter)
- Temperature sender (exhaust gas)
- Temperature sender (inlet air and ambient air temperature)
- V-Band clamp.
- VBand clamp (4″ exhaust pipe)
- VBand clamp (turbocharger)
- Mount (exhaust gas back-pressure sensor)
- AdBlue Connection Backflow – Inlet pipes
- Engine coolant replacement
- Starter motor
- Exhaust silencer
- DOC (diesel oxidation catalyst) catalytic converter
- Disassembling the DOC (diesel oxidation catalyst) catalytic converter
- Complete radiator pack
- Intercooler, gearbox oil and fuel heat exchangers
- Coolant fluid radiator
- AdBlue tank
- AdBlue pump module
- Compensation tank
- Air filter container
- Air intake duct
- Main tank
- Auxiliary tank
- Air compressor
- Fuel filter
- Duct
- Fan
D0 – Transmission
- Separation of Rear Axle from Transmission
- Removal of cartridge
- Disassembly of shifting drum
- Disassembly of P1 ring gear carrier
- Disassembly of P1/P2 Planetary drive
- Disassembly of P5/P6 Planetary drive
- Disassembly of KV clutch
- Disassembly of K1 clutch
- Disassembly of K3/K4 clutch and P3/P4 planetary drive
- Disassembly of K3/K4 clutch
- Disassembly of P3/P4 planetary drive
- Disassembly of KR clutch
- Disassembly of K2 Clutch
- Disassembly of Hydrostatic Unit
- Disassembly of control (TCU)
- Disassembly of pump
- Disassembly of suction filter
- Disassembly of Valve Block
- Disassembly of Valve Block
- Disassembly of Valve Block (P.R.V. – Pressure Relief Valve)
- Disassembly of W.H. and E.C.U.
- Disassembly of inductive sensors
- Disassembly of plug-in module
- Disassembly of output shaft
- Disassembly of intermediate housing
- Disassembly of drive shaft
- Reassembly of Transmission Housing
- Reassembly of drive shaft
- Reassembly of intermediate housing
- Reassembly of Plug-In Module
- Reassembly of output shaft
- Preassembly of Housing Lid
- Reassembly of Inductive Sensors
- Reassembly of W.H. and E.C.U.
- Reassembly of Valve Block (P.R.V. – Pressure Relief Valve)
- Reassembly of Valve Block
- Reassembly of Valve Block
- Reassembly of pump
- Reassembly of Control
- Reassembly of Hydrostatic Unit
- Reassembly of suction filter
- Reassembly of K2 Clutch
- Reassembly of KR clutch
- Reassembly of P3/P4 planetary drive
- Reassembly of K3/K4 Clutch
- Reassembly of K1 Clutch
- Reassembly of KV Clutch
- Reassembly of P5/P6 planetary drive
- Reassembly of P1/P2 planetary drive
- Reassembly of P1 Ring gear carrier
- Reinstallation of cartridge
- Fitting of rear axle to the transmission
- Pipes and closing components
- Torsionally flexible coupling and flywheel
- Gearbox hydrostatic pump
- Changing the transmission oil
- PTO speed sensor
E0 – Rear axle
- Removing the axle housing
- Removing brakes
- Removing the differential
- Removing the PTO
- Removing the oil feed
- Fitting lifter, oil feed and blanking elements
- Fitting the oil feed
- Fitting blanking elements
- Fitting the PTO
- Fitting the differential
- Fitting brakes
- Fitting the axle housing
- Procedure to check EPB stroke
F0 – Front axle
- Safety precautions
- Mandatory procedure for draining oil
- 4WD shaft
- Front axle
- Front axle carrier
- Pivot brackets
- Planetary reduction gearbox
- Steering cylinders
- Differential assembly
- Bevel pinion
- Engine speed sensor
- Stub axle and steering sensor
- Carrier with rear axle
G0 – Bodywork – Cab – Platform
- Empty and charge the air conditioning system
- Air conditioning compressor
- Condenser
- Front mudguards
- Main tank mount
- Battery mount
- Right hand cab access steps
- Left hand cab access steps
- Master cylinder
- Cab
- Engine hood and front hood panels
- Left side panel bracket
- Mat
- Under-seat mat
- Driver seat
- Passenger seat
- Left hand rear pillar cover
- Right hand rear pillar cover
- A/C unit
- Steering wheel
- Instrument cluster
- Right hand control console
- Left hand console
- Active carbon filter
- Electric Park Brake
- Replacing the evaporator
- A.C. Electronic Control Unit replacement
- Brake pressure sensor
- Brake pump pressure sensor
H0 – Hydraulic system
- Power steering
- Oil heat exchanger
- Front axle suspension solenoid valve block.
- Rear distributor assembly
- L.S. pump
- Air tanks
- Hydraulic braking
- Purge air from hydraulic brake system
- Brake system accumulator
- Air braking valve
- Steering system pressure sensor
L0 – Electrical system
- Instrument cluster
- Engine control unit
N0 – Front lift
- Front lift
- Front lift position sensor
R0 – Rear lift
- Removing the lifter
- Fitting the lifter
- Rear lift position sensor
- 3-point linkage
S0 – Wheels
- Front Wheels
- Rear wheels
V0 – Ballast – towing hitches
- Tow hook sled
- Tow hook
V1 – AFTERMARKET KITS
- Installation of the cab pillar filter frames kit (p.n. 9.AB386.91.0)
- Installation of the connector’s cover kit
Wiring diagrams
Introduction
- Introduction
- Basic electronics for mechanics (1/2)
- Basic electronics for mechanics (2/2)
- Electrical and electronic components (1/2)
- Electrical and electronic components (2/2)
Components
- HLHP Control unit (Service Controller Cab)
- Gear box Control unit
- ECU ISO 11786 Control unit
- Service TECU Control unit
- HLHP Control unit (Service Controller Body)
- Engine Control unit
- Remote control unit
- LED worklights control unit
- A – Starting and charging
- B – Fuses
- C – Grounds
- D – Intermediate connections
- E – On-board instruments and visual and audible indicators
- F – External lights (rotating beacon)
- G – Interior lights
- H – Manual electrical controls (steering column stalk)
- I – Circuit breakers
- J – Relays
- K – Sensors and transmitters
- L – Electromagnets and solenoid valves
- M – Electrical/electronic devices, Flasher units and Timers
- N – Electric motors and actuators
- O – Resistors and rheostats
- P – Various services
- R – Diagnostics
Systems
- S001 – Power
- S002 – Starter
- S003 – Engine cooling
- S004 – Engine control system
- S005 – Emissions control system
- S006 – Front lights
- S007 – Rear work lights
- S008 – Roof lights
- S009 – Front work lights
- S010 – Sidelights and turn indicators
- S011 – Internal illumination
- S012 – Defrost and wiper
- S013 – Horn
- S014 – Mirror adjustment
- S015 – Radio
- S016 – Power socket – accessories
- S017 – Air conditioning
- S018 – Front lift
- S019 – Rear lift
- S020 – Rear mudguards
- S021 – Braking system
- S022 – Trailer brake
- S023 – Transmission
- S024 – Isobus line
- S025 – “AUX” CAN line
- S026 – “VEHICLE” CAN line
- S027 – “BODY” CAN Line
- S028 – Agrosky
- S029 – i-Monitor
- S030 – Front axle
- S031 – Front loader
- S032 – Prewiring for solenoid valve module
- S033 – PTO
Wiring harnesses
- 0.012.2018.4/20 – License plate lights
- 0.012.4030.4 – Front PTO
- 0.016.8489.4 – Engine brake
- 0.017.0496.4/10 – H9 lower front work lights
- 0.017.0497.4/20 – H9 lower rear work lights
- 0.017.8425.4 – Trailer socket, EU
- 0.017.8426.4 – Trailer socket, USA
- 0.018.9990.4/10 – Electrical system for distributors
- 0.019.2379.4/20 – Work lights, sidelights, turn indicator and front lights
- 0.019.2380.4/40 – Turn indicator lights
- 0.019.2474.4/10 – Differential lock solenoid valve (PTO)
- 0.019.2539.4/10 – Hydraulic trailer braking
- 0.021.2571.4 – ISO 11786
- 0.019.3659.4 – Monitor (Armrest)
- 0.019.4559.4/10 – Rear work light on mudguard
- 0.019.4689.4/20 – Work lights for H9 roof
- 0.019.4914.4/20 – Work lights for cab roof (LED)
- 0.019.5311.4/10 – Automatic A/C system
- 0.019.9825.4/10 – Agrosky SRC40 antenna
- 0.019.9829.4/20 – Agrosky SR10 antenna
- 0.020.1009.4 – Front sidelights and work lights
- 0.020.1026.4/10 – Front turn indicators and lower front work lights
- 0.020.8862.4/10 – Roof panel electrical system
- 0.021.0490.4 – ABS socket for trailer
- 0.021.1028.4/10 – Agrosky Adapter
- 0.021.3880.4/20 – Rear ISOBUS electrical system
- 0.021.3932.4/10 – ISOBUS electrical system
- 0.021.5509.4 – Rear screen defrost
- 0.021.8291.4 – Front LED work lights
- 0.021.8334.4 – Rear LED work lights
- 0.023.0526.4 – TECU wiring loom
- 0.023.9006.4/10 – Lower fuse box
- 0.023.9007.4 – Front electrical system
- 0.023.9008.4/10 – Cowl electrical system
- 0.023.9201.4/10 – Battery wiring
- 0.023.9202.4/10 – Front axle steering sensor (Dana)
- 0.023.9204.4 – Agrosky
- 0.023.9205.4 – Electrohydraulic controls
- 0.023.9206.4 – Remote command control unit
- 0.023.9207.4 – Light adapter on front arm
- 0.023.9243.4/10 – Front ISOBUS socket
- 0.023.9246.4 – TECU wiring loom
- 0.023.9247.4 – Front loader
- 0.023.9249.4 – Front loader module
- 0.023.9250.4 – Rear mudguards
- 0.023.9582.4/10 – LED work lights for cab roof
- 0.023.9583.4/10 – H9 work lights for cab roof
- 0.023.9654.4/10 – Engine
- 0.023.9655.4 – Cab
- 0.023.9657.4 – Gearbox
- 0.023.9658.4 – Rear wiring loom
- 0.024.0765.4 – Rear screen defrost adapter
- 0.024.0881.4 – Seat heating
- 0.024.3197.4/10 – Front axle
- 04436707/10 – Flashing beacon
- 04437517 – Outline marker lights
Service Info
A0 – TRACTOR
- Diagnostics 2026 subscription
- After-sales 2026 subscription
- SERVICE NEWS RESEARCH GUIDE
- Diagnostics 2025 subscription
- After-sales 2025 subscription
- Diagnostics 2023 subscription
- Diagnostics 2024 subscription
- Diagnostics 2022 subscription
- Diagnostics 2021 subscription
- After-sales 2024 subscription
- After-sales 2023 subscription
- After-sales 2022 subscription
- After-sales 2021 subscription
- After-sales 2019 subscription
- Diagnostics – 2020 subscription
- After-sales – 2020 subscription
B0 – ENGINE
- Deutz AG engine oil specifications
C0 – ENGINE ACCESSORIES
- Diagnostic protocol – AdBlue – Float level unit
- Filter and prefilter tool p/n 5.9035.865.0
- Improved charge air cooler hose
- AdBlue Float level unit
- SCR AREA DAMAGED SENSORS
- Coolant tank leakage
F0 – FRONT AXLE
- Bevel gear set loosing screws
- Check the front axle steering knuckles for wear
- Wheel angle sensor malfunction of DANA front axle
- Steering behavior check procedure
G0 – BODYWORK – CAB
- Brake booster pump internal damage
- Air conditioning system recharging
H0 – HYDRAULIC AND PNEUMATIC SYSTEM|
- SERVICE NEWS – HPT – Front axle suspension – Damaged 2.8l accumulator
- Hydraulic CUNA trailer braking kit (ITALY)
- Single connection hydraulic braking kit availability update – only for EUROPEAN market
- Dry front brake discs – damaged brake pipes
- Front axle suspension group improvements
- PVED-CLS replacement
- L0 – ELECTRIC AL SYSTEM
