Document overview

Operator's manual for LAMBORGHINI RF.60 TARGET COMPACT → ZKDP0802W0TL1001 / 5001 from the RF TARGET family. Digital PDF in English, 290 pages.

The original table of contents contains 66 sections and 219 detailed topics, providing a clear view of the systems and procedures covered by this edition.

Preface
IDENTIFICATION
SAFETY
GETTING TO KNOW YOUR TRACTOR
USING THE TRACTOR
STORING THE TRACTOR
MAINTENANCE OPERATIONS
FAULT DIAGNOSIS
WHEELS
ELECTRICAL SYSTEM
TECHNICAL DATA

Document details

Brand: LAMBORGHINI
Family: RF TARGET
Model: RF.60 TARGET COMPACT
Starting serial number: ZKDP0802W0TL1001 / 5001
Document type: Operator's manual
Language: English
Pages: 290
File size: 31.09 MiB
Format: Digital PDF download

Compatibility

Before purchasing, verify that the model and starting serial number of your machine match RF.60 TARGET COMPACT → ZKDP0802W0TL1001 / 5001.

Complete table of contents

Preface
- Important
  - Warning
  - Handover of the tractor to the customer
  - To the owner of the new tractor
IDENTIFICATION
- List of model serial numbers
- Identification plates
  - Tractor identification label
  - Tractor serial number
  - Engine registration number
  - Engine identification plate
  - Identification label of protection devices
- Original spare parts
- Change of ownership of the tractor.
- Glossary
  - Technical terms used in this manual
  - Acronyms used in this manual
  - Units of measurement used in this manual and conversion factors
- Warranty
  - Warranty terms and conditions
  - Exclusions to the warranty
  - Intended use
  - Conditions rendering the warranty null and void
SAFETY
- Introduction
- Practical advice on safe working procedures
  - Protect the Environment
- General safety rules
- Accident prevention and personal safety
  - Safety clothing and equipment
  - Exposure to noise
  - Boarding and alighting from the tractor
  - Parking the tractor
  - Cleaning the tractor
- Operation
  - Checking indicator lights
  - Starting fluids
  - Auxiliary equipment
  - Towing safely
  - Driving on the road
  - Overturning
- Repairs and maintenance in safety
- Protective structure and seat belt
  - Roll-over protective structure (R.O.P.S.)
  - Seat belt
- Emergency stop
- Safety warning notices
  - Adhesive safety warning decals
GETTING TO KNOW YOUR TRACTOR
- Exterior views of the tractor
  - External views of the tractor
- Access to the driving position
  - Access to the operator position for tractors with platform and safety roll bar
- Operator seat
  - Operator seats
  - COBO SC74/M200 seat with mechanical suspension and PVC upholstery
  - Seat belt
- Steering wheel
  - Steering wheel
- Rear-view mirrors
  - External rear-view mirror for tractors with safety roll bar
- Instruments and tractor controls
  - Instruments and tractor controls
  - Instrument cluster
  - Console switches
  - Steering column controls
  - Right-hand console
  - Document pocket for the operator’s manual
  - Fire extinguisher
  - Hazard warning triangle
  - Immobilising the tractor using the wheel chocks
  - Tool box
- Other controls
  - Control pedals
  - Clutch pedal
  - Brake pedal
  - Parking brake lever
  - Accelerator pedal
  - Electronic hand throttle
  - Transmission controls
USING THE TRACTOR
- Introduction
  - Recommendations for first 50 operating hours
- Starting – Stopping the engine
  - Starting the engine
  - Switching off the engine
  - Leaving the tractor in safe conditions
  - Leaving the tractor in safely with a trailer hitched
  - Turbocharging using the turbocharger
- Transmission
  - Transmission
- Four-wheel drive – Differential lock
  - Engaging front-wheel drive
  - Front and rear differential locks
- Braking
  - Separate brakes valve
  - Hydraulic trailer braking
- Rear PTO
  - Rear PTO – definition and versions
  - Rear PTO controls and indicator lights
  - Use of the rear PTO
  - Rear PTO technical specifications
  - Use of the ground speed (Sync) PTO
  - Coupling and uncoupling PTO-driven implements
- Hydraulic rear lift
  - Hydraulic lift
  - Mechanically controlled rear load sensing lift
- 3-point linkage
  - 3-point linkage
  - Hitching and unhitching implements to/from the 3-point linkage
- Hydraulic system
  - Hydraulic system
  - Remote control valve
  - Types of auxiliary hydraulic distributor
  - Remote valve controls
  - Correspondence between the control levers and the hydraulic service couplers
  - Remote control valve operation
- Towing devices
  - Towing devices
  - Trailer towing eye-towing hitch compatibility
  - Technical characteristics of towing hitches
  - Adjusting the height of the towing hitches
  - Drawbar
  - Hitch support frame
  - Towing hitch with lock pin
  - Towing hitch with safety lock
  - Semi-automatic towing hitch
  - Automatic towing device
STORING THE TRACTOR
- Storing the tractor
  - Overview of procedures
  - Operations prior to a long period of non-use
  - Operations after a long period of non-use
MAINTENANCE OPERATIONS
- Maintenance warnings
  - Safe maintenance
- Washing the tractor and implements
  - Warnings
  - Hazards and protective devices
  - Required equipment
  - Starting conditions
  - Washing the exterior of the tractor
  - Washing the interior of the cab
- Decommissioning and disposal of the tractor
  - Decommissioning the tractor
  - Scrapping the tractor
- Fluids – Lubricants and fill volumes
- Coolant
  - Warnings
  - Composition
  - Properties
  - Specifications
  - Characteristics
- Contact an authorised service centre
- Service intervals
- Maintenance table – 1st Service
- Maintenance table
- Accessing the engine compartment
  - Accessing the engine compartment
- Daily intervention
  - General inspection of tractor
  - Checking the engine oil level
  - Checking coolant level
  - Checking the fuel level
  - Bleeding the fuel circuit
- Maintenance every 50 hours
  - Grease the rear axle
  - Greasing the 4WD front axle
  - Greasing the rear 3-point linkage
  - Checking the transmission oil level
  - Checking brake reservoir oil level
  - Checking the oil lines
  - Checking wheels and tyres
  - Maintenance of towing devices
  - Check the ballast weights
- Maintenance at 100 hours (1st service)
  - Checking engine belt tension
  - Changing the engine oil
  - Changing the engine oil filter cartridge
  - Checking radiator cleanliness
  - Changing the fuel filter
  - Changing the transmission oil filter
  - Check the parking brake lever
- Maintenance every 300 hours
  - Checking the front axle oil level (4WD)
  - Adjustment of the clutch pedal
  - Bleeding the hydraulic braking system
  - Bleeding the hydraulic circuit of the hydrostatic steering system
  - Check the battery
- Maintenance every 600 hours
  - Checking the protective structure and seat belt
- Maintenance every 1200 hours or at least once a year
  - Cleaning the engine air filter – Changing the filter element
  - Changing the differential oil and front axle planetary reduction unit oil (4WD)
  - Changing the transmission oil
- Maintenance every 1200 hours or at least every two years
  - Changing the coolant and flushing the circuit
FAULT DIAGNOSIS
- Introduction to troubleshooting
- Troubleshooting for entire tractor
- Engine troubleshooting
- Transmission troubleshooting
- PTO troubleshooting
- Lift troubleshooting
- Brakes troubleshooting
- Hydraulic system troubleshooting
- Distributor troubleshooting
- Electrical system troubleshooting
- Emergency types
- Towing a disabled vehicle
  - Warnings
  - General prescriptions for towing a disabled tractor
  - Preparing the tractor for towing
- Front emergency tow device
  - Warnings
  - Hazards and protective devices
  - Hitching and unhitching
- Transporting a disabled vehicle
  - Warnings
  - Characteristics of the vehicle to be used to transport the disabled tractor
  - Precautions for loading the tractor safely
  - Precautions for transporting the tractor safely
- Lift the tractor
  - Warnings
  - Lifting methods
  - Lifting tractor completely
  - Lifting one tyre
  - Lifting front or rear of the tractor
  - Lifting front of the tractor to adjust steering angle and axle suspension excursion
WHEELS
- Introduction
  - Basic information concerning tyres
  - Punctures and changing tyres
  - Wheel nut/screw tightening torques
  - Steering angle adjustment
  - Adjusting steering angle for axles with four limit screws
  - Adjusting steering angle for axles with two limit screws
  - Calculating the mechanical lead
- Tyre combinations
  - Front/rear tyre combinations
  - Inflation pressures, load index and speed rating of tyres
  - Load capacities of radial tyres and speed ratings
  - Load capacities of conventional/cross-ply tyres and speed ratings
- Track width calculation
  - Axle width
  - Adjusting track widths
  - Adjustment of fixed front fenders
- Ballasting
  - Weighing the tractor
  - Tractor/implement combination
  - Ballasts
  - Ballast mount
  - Intermediate plate
  - Suitcase ballast weights
  - Monolithic block
  - Metal discs for wheels
  - Liquid ballast for tyres
ELECTRICAL SYSTEM
- Introduction to the electrical system
- Battery
  - Battery
- Cab fuse box
  - Fuse box
  - Key to fuse and relay symbols
- Lights for road use
  - Lights for road use
  - Road lights – North America version
  - Headlight alignment
- Worklights
  - Work lights for tractors with platform
- Accessories
  - Installation of electronic components and/or equipment
  - Power outlet sockets
TECHNICAL DATA
- Declaration of conformity
- Technical data of the tractor
  - Main technical data
  - Fuel technical characteristics
  - Biodiesel technical characteristics
  - Ballasts – Technical data
- Dimensions and weights
  - Tractor dimensions, weights and speeds
- Implement attachment diagrams
  - Implement coupling holes diagram