Document overview
Operator's manual for LAMBORGHINI R2.60 TARGET → ZKDS9802W0TL10001 / 25001 from the R2 TARGET (STAGE 3A) family. Digital PDF in English, 282 pages.
The original table of contents contains 62 sections and 210 detailed topics, providing a clear view of the systems and procedures covered by this edition.
- Preface
- IDENTIFICATION
- SAFETY
- GETTING TO KNOW YOUR TRACTOR
- USING THE TRACTOR
- STORING THE TRACTOR
- MAINTENANCE OPERATIONS
- FAULT DIAGNOSIS
- WHEELS
- ELECTRICAL SYSTEM
- TECHNICAL DATA
Document details
- Brand: LAMBORGHINI
- Family: R2 TARGET (STAGE 3A)
- Model: R2.60 TARGET
- Starting serial number: ZKDS9802W0TL10001 / 25001
- Document type: Operator's manual
- Language: English
- Pages: 282
- File size: 33.78 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that the model and starting serial number of your machine match R2.60 TARGET → ZKDS9802W0TL10001 / 25001.
Complete table of contents
Preface
Important
- Warning
- Handover of the tractor to the customer
- To the owner of the new tractor
IDENTIFICATION
- List of model serial numbers
Identification plates
- Tractor identification plate
- Tractor serial number
- Engine number
- Engine identification plate
- Cab identification plate
- Original spare parts
Warranty
- Delivery and installation
- Warranty procedure
- Transport
- Post-warranty assistance
SAFETY
- Introduction
Practical advice on safe working procedures
- Protect the Environment
- General safety rules
Accident prevention and personal safety
- Safety clothing and equipment
- Exposure to noise
- Boarding and alighting from the tractor
- Parking the tractor
- Cleaning the tractor
Operation
- Checking indicator lights
- Starting fluids
- Auxiliary equipment
- Towing safely
- Driving on the road
- Overturning
- Repairs and maintenance in safety
- Emergency stop
Safety cab
- Roll Over Protective Structure (ROPS)
- Emergency exits
- Falling Object Protective Structure (FOPS)
- Operator Protective Structure (OPS)
- Use of hazardous substances
Decommissioning and disposal of the tractor
- Decommissioning the tractor
- Decommissioning and disposal of the tractor
Safety warning notices
- Adhesive safety warning decals
GETTING TO KNOW YOUR TRACTOR
Exterior views of the tractor
- Exterior views of tractor with safety cab
Access to the driving position
- Access to the driving position for tractors with cab
Operator seat
- Operator seats
- “GRAMMER MSG83/721” seat with mechanical suspension and fabric upholstery
- Seat type “GRAMMER MSG93/721” with pneumatic suspension and fabric upholstery
- Seat belt
Steering wheel
- Steering wheel
Rear-view mirrors
- External rear-view mirrors
Instruments and tractor controls
- Instruments and tractor controls
- Instrument panel
- Console switches
- Steering column multiswitch
- Right-hand console
- Controls in the roof lining
- Ventilation system
- Heating system
- Air conditioning system
- Cab air filter
- Cab
- Document pocket for the operator’s manual
- Fire extinguisher
- Hazard warning triangle
- Wheel chock
- Tool box
Other controls
- Control pedals
- Clutch pedal
- Brake pedal
- Parking brake lever
- Accelerator pedal
- Electronic hand throttle
- Transmission controls
USING THE TRACTOR
Introduction
- Engine – first 50 operating hours
Starting – Stopping the engine
- Starting the engine
- Switching off the engine
- Dismounting from the tractor safely
- Turbocharging using the turbocharger
Transmission
- Transmission
- Mechanical shuttle
Four-wheel drive – Differential lock
- Engaging front-wheel drive
- Front and rear differential locks
Braking
- Brakes, “SEPARATE BRAKES” Valve
- Hydraulic trailer braking
- Automatic-pneumatic braking device
Rear PTO
- Rear PTO – definition and versions
- Rear PTO controls and indicator lights
- Use of the rear PTO
- Rear PTO technical specifications
- Use of the ground speed (Sync) PTO
- Coupling and uncoupling of PTO-driven implements
Hydraulic rear lift
- Hydraulic lift
- LOAD SENSING mechanically controlled rear lift
3-point linkage
- 3-point linkage
Hydraulic system
- Hydraulic system
- Remote valve
- Types of remote control valve
- Auxiliary hydraulic directional control valve controls
- Correspondence between the control levers and the rear hydraulic couplers
- Behaviour of the oil flow in the hydraulic circuit connecting the couplers and the actuator cylinders on the implement
Towing devices
- Towing devices
- Adjusting the height of the towing hitch
- Drawbar
- Angle brackets for towing hitches
- Standard long hitch support frame
- Towing hitch with lock pin
- Towing hitch with safety lock
- Semi-automatic towing hitch
- Automatic towing hitch
- Mechanical Pick-up Hitch
- Piton Fix or ball towing hitch frame
- Tractor/implement combination
- Weighing the tractor
STORING THE TRACTOR
- Operations prior to long term garaging
- Preparing the tractor for use after a long period of inactivity
MAINTENANCE OPERATIONS
Maintenance operations
- Maintenance intervals
- Washing the exterior of the tractor/attached implements
- Washing the cab interior
- Fluids – Lubricants and fill volumes
- Service intervals
- Maintenance and inspection schedule
Accessing the engine compartment
- Accessing the engine compartment
Daily intervention
- General inspection of the tractor
- Checking the engine oil level
- Checking coolant level
- Fuel level check
- Check the electrical system
Maintenance every 50 hours
- Checking the transmission oil level
- Grease the rear axle
- Greasing the front axle (2WD)
- Greasing the front axle (4WD)
- Checking brake reservoir oil level
- Check the battery
- Greasing the rear 3-point linkage
- Checking wheels and tyres
Maintenance at 100 hours (1st service)
- Checking the braking distance
- Checking engine belt tension
- Changing the engine oil
- Changing the engine oil filter cartridge
- Checking radiator cleanliness
- Changing the fuel filter
- Check the parking brake lever
- Checking the screen washer system
- Cleaning the cab ventilation system filters
- Checking the oil pipelines
Maintenance every 300 hours
- Checking the front axle oil level (4WD)
- Adjustment of the clutch pedal
Maintenance every 600 hours
- Set engine valves clearance and fuel injectors
- Changing the transmission oil filters
- Checking the differential lock system
- Checking the braking system with safety brakes valve
Maintenance every 1200 hours or at least once a year
- Fuel injection pump maintenance
- Cleaning engine air filter – Changing air filter cartridge and internal safety cartridge
- Starter motor maintenance
- Bleeding the hydraulic braking system
- Front wheel hub bearings (2WD)
- Cab heating system maintenance
- Cab air conditioning system maintenance
Maintenance every 1200 hours or at least every two years
- Changing the coolant and flushing the circuit
- Changing the transmission oil
- Changing the front wheel hub oil (2WD)
- Changing the front axle oil (4WD)
General maintenance
- Bleeding the fuel circuit
- Bleeding the hydraulic circuit of the hydrostatic steering system
FAULT DIAGNOSIS
Towing the tractor
- Towing with the engine running
- Towing with the engine off
- Safe transport of the tractor
- Lifting the tractor
- Engine troubleshooting
- Gearbox troubleshooting
- Front and rear power take-off troubleshooting
- Front-wheel drive troubleshooting
- Brakes troubleshooting
- Lift troubleshooting
- Hydraulic system troubleshooting
- Hydraulic remote valves troubleshooting
- Cab troubleshooting
- Electrical system troubleshooting
- Fault diagnosis
Transmission and hydraulic shuttle alarms
- Display of alarms
Instrument panel alarms
- Display of alarms
WHEELS
Introduction
- General information regarding tyres
- Punctures
- Wheel nut/bolt tightening torques
Tyre combinations
- Permissible tyre combinations
- Calculation of the mechanical lead
- Tyre load capacities
Track width calculation
- Minimum track width
- Track width adjustment
- Adjustment of the front fenders (2WD)
- Adjustment of the front fenders
Ballasting
- Handling ballast weights
- Tractor ballast
- Front ballast with cast-iron blocks
- Ballast for wheels with water-filled tyres
ELECTRICAL SYSTEM
Battery
- Battery
Cab fuse box
- Fuse box
- Key to fuse and relay symbols
Lights for road use
- Lights for road use
- Headlight alignment
- Road lights – North America version
Worklights
- Work lights for tractors with cab
- Interior courtesy light
Accessories
- Installation of additional electronic components and/or equipment
- Power outlet sockets
TECHNICAL DATA
- Declaration of conformity
Technical data of the tractor
- Technical data
- Fuel technical characteristics
- Biodiesel technical characteristics
- Coolant
- Noise levels
- Vibration referred to the operator position
Dimensions and weights
- Tractor dimensions, weights and speeds
Implement attachment diagrams
- Implement coupling holes diagram
