Document overview
Digital Workshop Manual documentation for model HURLIMANN TCD 2015 L06 4V DCR Stage 3A from the Tractor components – Engine – DEUTZ AG Stage 3 family. Language: English; 529 pages.
The corresponding English table of contents contains 4 sections and 124 individual topics.
Main sections included
- Introduction
- Method of intervention
Document details
- Brand: HURLIMANN
- Family: Tractor components – Engine – DEUTZ AG Stage 3
- Model: TCD 2015 L06 4V DCR Stage 3A
- Document type: Workshop Manual
- Language: English
- Pages: 529
- File size: 34.87 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that your machine model and reference code match HURLIMANN TCD 2015 L06 4V DCR Stage 3A.
Complete table of contents
Introduction
- Introduction
- Tightening Torques
Method of intervention
- Tools for engine disassembly and reassembly
- Workshop tools for engine disassembly and reassembly (Lv.3)
B0 – Engine
- Test and adjustment data (L3)
- Tightening torque (L3)
- Check the compression value (L3)
- Assembly and disassembly of the engine on the assembly stand (L3)
- Valve clearance adjustment (L3)
- Disassembly and assembly of the rocker and support (L3)
- Removing and refitting the rocker and mount, checking (L3)
- Grinding the cylinder head seal surface (L3)
- Disassembly and assembly of the cylinder head (L3)
- Measuring piston protrusion (L3)
- Valve assembly and disassembly (L3)
- Valve check (L3)
- Check the valve guide (L3)
- Replacing the valve guide (oversized – press-fit) (L3)
- Check the valve residual (L3)
- Replacing the lined valve seat (oversized) (L3)
- Check the endfloat of the crankshaft (crankshaft removed) (L3)
- Check the endfloat of the crankshaft (crankshaft installed) (L3)
- Crankshaft check (L3)
- Replace the crankshaft O-ring (flywheel end) (L3)
- Replace the crankshaft O-ring (opposite end to flywheel) (L3)
- Connecting rod drum check (L3)
- Fitting and removing piston pin bush (L3)
- Assembly and disassembly of the crankshaft (L3)
- Disassembly and assembly of the piston and connecting rod drum (L3)
- Check the piston (L3)
- Check the piston rings and piston grooves (L3)
- Fitting and removing piston cooling nozzle (L3)
- Removing and fitting crankcase breather (oil separator) (L3)
- Checking the cylinder sleeve (L3)
- Fitting and removing the cylinder sleeve (L3)
- Checking cylinder sleeve protrusion (L3)
- Removing and fitting ancillary mount (L3)
- Removing and fitting ancillary mount (L3)
- Removing and refitting rear cover (L3)
- Disassembly and assembly of the connector box (L3)
- Correcting contact points of cylinder sleeve (L3)
- Fitting and removing the camshaft bearings, checking (L3)
- Fitting and removing tappets, checking tappet holes (L3)
- Disassembly and assembly of the gear case cover (L3)
- Disassembly and assembly of the gear case cover (L3)
- Assembly and disassembly of the camshaft (L3)
- Check the camshaft (L3)
- Fitting and removing the injection pump camshaft (L3)
- Fitting and removing the rotation tool (L3)
- Removing and fitting the exhaust manifold (L3)
- Removing and fitting the exhaust manifold (Bank A) (L3)
- Removing and fitting the exhaust manifold (Bank B) (L3)
- Disassembly and assembly of the turbocharging air duct (L3)
- Disassembly and assembly of the connecting line (L3)
- Disassembly and assembly of the connecting line (L3)
- Disassembly and assembly of the turbocharger (L3)
- Removing and fitting the turbocharger (Bank A) (L3)
- Removing and fitting the turbocharger (Bank B) (L3)
- Removing and fitting the air intake pipe (Bank A) (L3)
- Removing and fitting the air intake pipe (Bank B) (L3)
- Replacing the injection pipes (Bench A) (L3)
- Replacing the injection pipes (Bench A) (L3)
- Fitting and removing the injection pumps (cylinder A1) (L3)
- Fitting and removing the injection pumps (cylinder A2-B3) (L3)
- Checking and adjusting maximum injection pump aperture stroke (L3)
- Fitting and removing injection valves (L3)
- Removing and refitting the injection valve (L3)
- Checking and adjusting the injection valves (L3)
- Removing and fitting fuel delivery pump (L3)
- Assembly and disassembly of the fuel pressure regulating valve (L3)
- Assembly and disassembly of the fuel pressure regulating valve (L3)
- Assembly and disassembly of the oil intake pipe (L3)
- Replace the crankshaft O-ring (flywheel end)
- Fitting and removing seal seat
- Assembly and disassembly of the oil intake pipe (L3)
- Disassembly and assembly of the lubricant oil sump (L3)
- Fitting and removing transition pipe
- Disassembly and assembly of the lubricant oil sump (L3)
- Disassembly and assembly of the oil radiator (L3)
- Line
- Removal and refitting of the oil sump pan.
- Fitting and removing the oil pressure transducer (L3)
- Fitting and removing the regulator valve (L3)
- Closing components
- Topping up with oil
- Removing and fitting the coolant pump (L3)
- Check the thermostat (after removal) (L3)
- Removal and refitting of the flywheel (fixing elements)
- Removal and refitting of the cylinder head cover
- Fitting and removing the thermostats (L3)
- Removing and fitting the thermostat housing (L3)
- Support
- Intermediate gear
- Removal and refitting of the oil cooler
- Disassembly and assembly of the torsional vibration damper (L3)
- Assembly and disassembly of the flywheel (L3)
- Lubricating oil filter console
- Replacing the starter ring gear on the flywheel (L3)
- Removing and fitting the hydraulic pump drive (L3)
- Disassembly and assembly of the connector box
- Disassembly and assembly of the connector box
- Disassembly and assembly of the connector box
- Disassembly and assembly of the connector box
- Disassembly and assembly of the connector box
C0 – Engine accessories
- Removal and refitting of the crankshaft speed sensor (L3)
- Removal and refitting of the camshaft speed sensor (L3)
- Removing and fitting the exhaust pipe (Bank A) (L3)
- Removing and fitting the exhaust pipe (Bank B) (L3)
- Removing and fitting the exhaust pipe (Bank A) (L3)
- Removing and fitting the exhaust pipe (Bank B) (L3)
- Assembly and disassembly of the spark plug (L3)
- Assembly and disassembly of the spark plug (L3)
- Disassembly and assembly of the fuel cutoff valve (spark plugs) (L3)
- Disassembly and assembly of the fuel cutoff valve (spark plugs) (L3)
- Disassembly and assembly of the fuel pipes (spark plugs) (L3)
- Disassembly and assembly of the fuel pipes (spark plugs) (L3)
- Assembly and disassembly of the temperature sender (L3)
- Disassembly and assembly of the fuel pipes (L3)
- Disassembly and assembly of the fuel pipes (L3)
- Assembly and disassembly of the temperature sender (L3)
- Disassembly and assembly of the cable bundle (L3)
- Removing and fitting the alternator (driven by toothed belt) (L3)
- Disassembly and assembly of the starter (L3)
- Removal and refitting of the supply air pressure/temperature sender (L3)
