Document overview
Workshop Manual PDF for SAME DORADO S 70 (20'') → S10N673WVT03001, DORADO S family. Document language: English; 1,102 pages.
The corresponding English table of contents contains 45 sections and 307 individual topics.
Main sections included
- Introduction
- Safety
- Technical characteristics
- Calibrations and electronic diagnosis
- Method of intervention
- Wiring diagrams
- Service Info
Document details
- Brand: SAME
- Family: DORADO S
- Model: DORADO S 70 (20'')
- Starting serial number: S10N673WVT03001
- Document type: Workshop Manual
- Language: English
- Pages: 1,102
- File size: 209.74 MiB
- Format: Digital PDF download
Compatibility
Before purchasing, verify that your machine model and reference code match SAME DORADO S 70 (20'') → S10N673WVT03001.
Complete table of contents
Introduction
- Introduction – Engines
- Identification of the engine type and serial number position, Europe version
- Identification of the engine type and serial number position, EPA version
- Injection pump type identification
- Injector type identification
- Tightening Torques
- Units of measurement and conversion factors
Safety
Preface
- Important notes concerning safety
Important safety information
- Recognising hazards
- Indications for persons in contact with the tractor
Safety rules
- Risks during tractor preparation
- Risks during maintenance
- Work on machine systems
- Special disassembly/assembly/inspection procedures
Safety pictograms
- Replacing safety pictograms
Environmental risks
- Hazards associated with the operating environment
Technical characteristics
Engine
- Engine block technical data – cylinders
- Crankshaft technical data
- Crankshaft technical data
- Crankshaft technical data
- Piston technical data – Piston rings
- Piston technical data – Piston rings
- Piston technical data – Piston rings
- Piston technical data – Piston rings
- Connecting rod technical data
- Connecting rod technical data
- Camshaft technical data – static advance of 13°
- Camshaft technical data – static advance of 16°
- Timing gears technical data
- Counter-rotating weights technical data
- Technical data and dimensions of valves – valve springs
- Technical data and dimensions of cylinder heads – valve guides – valve seats
- Technical data and dimensions of rocker arms – rocker shafts – tappets
- Engine injector technical data (aspirated versions)
- Engine injector technical data (with turbocharger)
- Injectors technical data (turbo-intercooler engines)
Transmission
- Transmission
- Rear PTO
Front axle
- Front axle
Hydraulic system
- Hydraulic system diagrams
- Steering and lift circuit gear pumps diagrams
- Power steering valve
- Auxiliary services directional control valve
- Hydraulic lift control valve
- Trailer braking valve
- Services solenoid valve assembly
- HML solenoid valve assembly
- 3-point linkage hydraulic control valve
Front PTO
- Front PTO
Front lift
- Front lift
Calibrations and electronic diagnosis
Diagnostic tools
- Connecting tester to electronic control units
SDF Analyser
- SDF Analyser
Diagnostic tool screens
- Introduction to the tractor’s electronic system
Commissioning and calibrating the tractor
- Putting the tractor into service
ECU alarms
- Alarms
Method of intervention
B0 – Engine
- Engine – Separation from the transmission
- Preliminary and final operations
- Final engine checks
- Checking engine block
- Crankshaft
- Crankshaft checks
- Flywheel checks
- Renewal of crankshaft rear oil seal
- Pistons and cylinder liners
- Pistons and rings check
- Cylinder liners check
- Check connecting rods – gudgeon pins – rod cap screws
- Camshaft
- Camshaft checks
- Timing gear checks
- Adjusting timing gears backlash
- Valve timing
- Counter-rotating weights
- Overhaul of counter-rotating weights assembly
- Counter-rotating weight checks
- Valves check
- Valve seats check
- Valves sealing check
- Valves adjustment
- Valve guides check and replacement
- Inspecting the rocker arms and rocker shafts
- Cylinder heads
- Valve springs check
- Heat exchanger removal
- Disassembly of the heat exchanger
- Lubrication pump
- Lubrication pump disassembly
- Oil sump
- INJECTION PUMPS, GOVERNOR AND FUEL SUPPLY
- Injection pump timing
- Injectors assembly
- Checking injectors protrusion – Renewal of copper bushes
- Injectors check
- Injection pumps control rod
- Overhaul of the mechanical governor (standard and with LDA valve)
- Overhaul of the mechanical governor gear
- Adjusting electronic actuator
- Installation of mechanical governor drive unit and electronic governor support
- Power adjustment data table
- Engine coolant pump
- Thermostatic valve
- Checking the thermostat valve
- Cooling and intake ducts
C0 – Engine accessories
- Coolers
- Fuel tank
- Additional fuel tank
- Starter motor
D0 – Transmission
- Shuttle assembly – complete unit
- Disassembly of shuttle assembly
- Cover assembly
- Forward drive clutch unit
- Reverse drive clutch unit
- HML assembly
- Clutch assembly
- Planet gear support unit – HML unit
- Gearbox input shaft – Version with HML
- Gearbox input shaft – Version without HML
- Torsional spring plate
- Primary shaft
- Disassembling secondary shaft – Version with range selector unit
- Secondary shaft – Version without HML
- Gearbox and shuttle assembly – complete unit – Version with HML
- Disassembly of gearbox and shuttle assy. – complete unit – Version with HML
- Gearbox and shuttle assembly – complete unit – Version without HML
- Disassembly of gearbox and shuttle assy. – complete unit – Version without HML
- Range and differential assembly – complete assembly
- Gearbox support and gear selector rods
- Range selector rod
- Underdrive control rod – Version with HML
- Sprocket
- Differential – Bevel gear pair
- Dual traction output shaft and groundspeed PTO
- PTO clutch
- PTO clutch disassembly.
- PTO pumps drive – Inner gear
- PTO output shaft (2 speed + ground speed)
- Ground speed P.T.O. control shaft
- PTO final shaft.
- Hand brake
- Dual traction engagement device – Version without HML
- Disassembly of the four-wheel drive engagement device – Version without HML
E0 – Rear axle
- RH rear axle
- RH/LH rear axle – Version with narrow axle
- RH/LH rear axle – Version with normal axle
- LH rear axle
- Planet gear carrier
- Differential
- Removing rear differential
- Rear axle brake discs
- Rear axle brake piston
F0 – Front axle
- Front carrier
- 4WD front axle
- Steering cylinders
- Steering knuckle housing and halfshaft
- Adjusting the bearings preload
- Differential unit
- Differential locking device adjustment
- Differential lock device
- Bevel gear pair
- Adjustment of the pinion position and bearing preloading
- Differential
- 4WD shaft
- Final drive reduction unit
- Final drive reduction unit disassembly
- Front brake discs
- Front axle brake piston
G0 – Bodywork – Cab – Platform
- Cab
- Platform
- Front hoods
- Instrument panel
- Brake master cylinders
- Control levers – Version with mechanical lift
- Roll Over Protective Structures
H0 – Hydraulic system
- Pump for hydraulic lift and auxiliary services
- Power steering
- Power steering disassembly
- Power steering pump
- Rear auxiliary services directional control valve
- Trailer braking valve
- Services solenoid valve assembly
- Disassembling the ancillary solenoid valves
R0 – Rear lift
- Lift unit – complete assembly – Version with mechanical lift
- Lift disassembly – complete unit – Version with mechanical lift
- Lift cylinder – Version with mechanical lift
- Bushings – Version with mechanical lift
- Lift control distributor – Version with mechanical lift
- Disassembling the lift control cylinder – Version with mechanical lift
- Mechanical draft sensor – Version with mechanical lift
- Mechanical draft sensor disassembly – Version with mechanical lift
- 3-point hitch
S0 – Wheels
- Front wheels
- Rear wheels
V0 – Ballast – towing hitches
- Towing hitch
Wiring diagrams
Introduction
- Structure of the unit
- Indices
Components
- Component technical data
Systems
- Earthing points
- Starting and preheating – tractor equipped with electronic governor and cab
- Electronic engine control – tractor with electronic governor and cab
- Lights – steering column switch – tractor with mechanical governor and cab
- Diagnostic accessories – tractor with electronic governor and cab
- Diagnostic accessories – tractor with electronic governor and platform
- Instrument panel
- Worklights – Tractor with cab
- Worklights wiring – Tractor with platform
- Windscreen wipers
- Heating
- Air conditioning
- HML transmission
- Front and rear PTO
- Brakes
- Front control valve
- Electronic lift – tractor with cab
- 3-point hitch
- CANBUS ELECTRONIC SYSTEM
Wiring harnesses
- Battery leads wiring – 0.010.6708.3/20
- Battery wiring connector positions
- Pre-heating and power supply wiring – tractor with 3-cylinder engine and cab – 0.013.8400.4/10
- Position of preheating and power supply wiring connectors – tractor with 3-cylinder engine and cab
- Pre-heating and power supply wiring – tractor with 4-cylinder engine and cab – 0.013.8399.4/10
- Position of preheating and power supply wiring connectors – tractor with 4-cylinder engine and cab
- Pre-heating and power supply wiring – tractor with 3-cylinder engine and platform – 0.013.8402.4
- Position of preheating and power supply wiring connectors – tractor with 3-cylinder engine and platform
- Pre-heating and power supply wiring – tractor with 4-cylinder engine and platform – 0.013.8401.4
- Position of preheating and power supply wiring connectors – tractor with 4-cylinder engine and platform
- Front wiring – tractor with 3-cylinder engine – 0.013.8397.4/10
- Position of front wiring loom connectors – tractor with 3-cylinder engine
- Front wiring – tractor with 4-cylinder engine – 0.013.8398.4/10
- Position of front wiring loom connectors – tractor with 4-cylinder engine
- Front P.T.O. wiring – 0.012.2756.3
- Position of PTO wiring connectors PTO
- Front control valve wiring – 0.014.4784.4
- Central wiring loom – tractors with electronic governor – 0.014.4780.4/30
- Position of central wiring loom connectors – tractors with electronic governor
- Electronic lift wiring – 0.011.2025.4/40
- 3-point linkage wiring – 0.012.0101.4
- Rear wiring loom – 0.014.4782.3/30
- Position of rear wiring loom connectors
- Heating system wiring – 0.010.2147.2
- Position of heating system wiring connectors
- Air conditioning wiring – 0.010.2153.2
- Position of air conditioner wiring loom connectors
- Air conditioning cooler fan wiring 0.011.0644.3/20
- Position of air conditioning exchanger fan wiring connectors
- Roof line wiring loom – 0.010.7262.4/20
- Position of roof line wiring connectors
- Cab power supply wiring – 0.013.8403.4/10
- Cab power supply wiring connector positions
- Wiring for worklights, rear window wiper and flashing light – 0.010.7263.4/20
- Position of worklights, rear window wiper, and flashing light wiring loom connectors
- Front control valve solenoid valve wiring – 0.010.4795.3/10
- Cab lights wiring – 0.010.9057.3
- Position of cab front lights wiring connectors
- Headlamps wiring on ROPS – 0.013.6326.4
- Position of wiring connectors for ROPS lights
- Windscreen wiper wiring – 0.010.7264.4/10
- Position of windscreen wiper wiring connectors
- Earth wiring – 0.011.9828.3
- Position of earth wiring loom connectors
- Shuttle lever wiring – 0.013.0675.4
- Position of reverse shuttle lever wiring connectors
- Trailer braking wiring – 0.012.2103.3
- Position of trailer braking wiring connectors
- Filter wiring – 0.011.7711.3
- Position of filter wiring connectors
- Interference suppressor wiring – 0.015.0070.4
- Position of Interference suppressor wiring connectors
- Rotating beacon wiring – 0.013.6327.4
- Position of rotary beacon wiring connectors
Service Info
A0 – TRACTOR
- Diagnostics 2026 subscription
- After-sales 2026 subscription
- SERVICE NEWS RESEARCH GUIDE
- Diagnostics 2025 subscription
- After-sales 2025 subscription
- Diagnostics 2023 subscription
- Diagnostics 2024 subscription
- Diagnostics 2022 subscription
- Diagnostics 2021 subscription
- Technical Documentation DVD 06/2009
- Technical Documentation DVD 07/2008
- SDF LUBRICANTS: Lubricant oils and coolant fluids
- After-sales 2024 subscription
- After-sales 2023 subscription
- After-sales 2022 subscription
- After-sales 2021 subscription
- After-sales 2019 subscription
- SDF Parts and SDF Service DVV 04/2014, version 26
- Technical Documentation DVD 03/2010
- New function: Download PDF manuals
- Diagnostics – 2020 subscription
- After-sales – 2020 subscription
- After-sales – 2018 subscription
- Service and Spare Parts – 2017 Subscription
- SDF Parts and SDF Service DVDs 05/2014 version 25
- SDF Parts and SDF Service DVDs 03/2013 version 24
B0 – ENGINE
- Flushing the lubrication circuit
- Checking correct projection distance of injectors
- Recommendations when using tractors equipped with SAME 1000.W 3 – 4 cylinder Tier II (Euro II) engines
- Deutz AG engine oil specifications
C0 – ENGINE ACCESSORIES
- Diagnostic protocol – AdBlue – Float level unit
- Filter and prefilter tool p/n 5.9035.865.0
D0 – TRANSMISSION
- Bushes on shuttle input shafts
F0 – FRONT AXLE
- Check the front axle steering knuckles for wear
- Steering behavior check procedure
G0 – BODYWORK – CAB
- Air conditioning system recharging
H0 – HYDRAULIC AND PNEUMATIC SYSTEM|
- Hydraulic CUNA trailer braking kit (ITALY)
- Single connection hydraulic braking kit availability update – only for EUROPEAN market
- L0 – ELECTRIC AL SYSTEM
